Xantrex Watt Series Programmable DC Power Supply XG... Bedienungsanleitung

XG 850 Watt Series

Programmable DC

Power Supply

Operating Manual

XG 6-110

XG 8-100

XG 12-70

XG 20-42

XG 33-25

XG 40-21

XG 60-14

XG 80-10.5

XG 100-8.5

XG 150-5.6

XG 300-2.8

XG 600-1.4

www.programmablepower.com

XG 850 Watt Series

Programmable DC Power

Supply

Operating Manual

M370078-01 ii

About Xantrex

Xantrex Technology Inc. is a world-leading supplier of advanced power electronics and controls with

products from small mobile units to utility-scale systems for wind, solar, batteries, fuel cells,

microturbines, and backup power applications in both grid-connected and stand-alone systems. Xantrex

products include inverters, battery chargers, programmable power supplies, and variable speed drives

that convert, supply, control, clean, and distribute electrical power.

Trademarks

XG 850 Watt Series Programmable DC Power Supply is a trademark of Xantrex International. Xantrex

is a registered trademark of Xantrex International.

Other trademarks, registered trademarks, and product names are the property of their respective owners

and are used herein for identification purposes only.

Notice of Copyright

XG 850 Watt Series Programmable DC Power Supply Operating Manual© November 2007 Xantrex

Exclusion for Documentation

UNLESS SPECIFICALLY AGREED TO IN WRITING, XANTREX TECHNOLOGY INC.

(“XANTREX”)

(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF

ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER

DOCUMENTATION.

(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR

EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL,

WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH

INFORMATION WILL BE ENTIRELY AT THE USER’S RISK; AND

ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE

TRANSLATION, THE ACCURACY CANNOT BE GUARANTEED. APPROVED XANTREX

CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED

AT WWW.PROGRAMMABLEPOWER.COM.

Date and Revision

November 2007 Revision A

Part Number

M370078-01

M370078-01 iii

Product Numbers (FGAs)

Part Numbers for Rack Mount Kits

Contact Information

XG6-110 XG60-14

XG8-100 XG80-10.5

XG12-70 XG100-8.5

XG20-42 XG150-5.6

XG33-25 XG300-2.8

XG40-21 XG600-1.4

Rack Mount Kit Part Number

Dual XG 850 Watt RM-D-XG1

Single XG 850 Watt RM-S-XG1

Rack mount rails for

XG Series

RM-XG

Telephone: 1 800 733 5427 (toll free North America)

1 858 450 0085(direct)

Fax: 1 858 458 0267

Email: sales@programmablepower.com

service@programmablepower.com

Web: www.programmablepower.com

M370078-01 v

About This Manual

Purpose

The Operating Manual provides installation and operating information for

the XG 850 Watt Series Programmable DC Power Supply.

Scope

The Manual provides safety information, features and specifications,

installation procedures, functional test procedures, and operating procedures

for both local (front panel) operation and remote operation.

The Manual does not provide information on the GPIB and Ethernet

(ENET) interface options. See the XG 850 Watt GPIB and Ethernet

Interface Option Operating Manual (Part number M370078-06).

Audience

The Manual is intended for the user who is familiar with electronic power

supplies, Constant Voltage and Constant Current operating modes, and the

control of output power. The user should be familiar with practicing safe

techniques while making supply or pin connections.

Conventions Used

The following conventions are used in this guide.

WARNING

Warnings identify conditions or practices that could result in personal injury or

loss of life.

CAUTION

Cautions identify conditions or practices that could result in damage to the unit or

other equipment.

Important:

Important notes provide information that is important for you to

know. They are not as serious as Warnings or Cautions.

About This Manual

vi M370078-01

Related Information

For related information on this product, see also:

•XG 850 Watt GPIB and Ethernet Interface Option Operating Manual

(Part number M370078-06) provides information on the GPIB and

Ethernet interface option.

•XG 850 Watt Series Programmable DC Power Supply: Quick

Reference Guide (Part number M370078-04) is included with your

power supply and provides an introduction to using the front panel

interface.

•Rack Mount Kit Options Installation Instructions (Part number

M370078-05) provides information on rack mounting a single or

dual XG 850 Watt.

More information about Xantrex Technology Inc. as well as its products

and services is available at www.programmablepower.com.

Acronyms

Font Conventions

This Manual uses the following typographical conventions:

Acronym Definition

APG Analog Programming

AUX Auxiliary

ENET Ethernet

FGA Finished Goods Assembly

ISOL Isolated Analog Programming

OTP Over Temperature Protection

OVP Over Voltage Protection

PSU Power Supply Unit

TVS Transient Voltage Suppressor

UVP Under Voltage Protection

7 segment For display and readback information on the

output voltage and current displays.

Command body text Represents SCPI commands.

M370078-01 vii

Important Safety Instructions

Power Supply Safety Markings

WARNING: High energy and high voltage

Exercise caution when using a power supply. High energy levels can be stored at

the output voltage terminals on a power supply in normal operation. In addition,

potentially lethal voltages exist in the power circuit and on the output and sense

connectors of a power supply with a rated output greater than 40 V. F i l t e r

capacitors store potentially dangerous energy for some time after power is

removed.

WARNING: Fire hazard

Operate the power supply in an environment free of flammable gases or fumes.

To ensure that the power supply's safety features are not compromised, use the

power supply as specified in this Manual and do not substitute parts or make any

unauthorized modifications. If service is necessary, please return the power

supply to the Authorized Service Center. See “Return Material Authorization

Policy” on page WA – 3.

WARNING: Limitations on use

The XG 850 Watt Series Programmable DC Power Supply is not intended for use

in connection with life support systems or other medical equipment or devices.

CAUTION: For use as a battery charger

When you are using a power supply for battery charging applications, it is

essential to provide an appropriately sized fuse or circuit breaker in series

between the power supply output and the battery.

Installation of a protector (fuse or DC circuit breaker), rated for about 115% of

the maximum current rating of the power supply and designed specifically to

interrupt the DC voltage of the battery, will provide adequate current protection.

Where several power supplies are in parallel, it is best to fuse each power supply

rather than use one fuse at the battery.

Alternating Current On (Supply)

Earth (Ground) Terminal Off (Supply)

Protective Conductor

Terminal

Caution (Check the Manual

for additional information.)

Safety

viii M370078-01

Standard Warnings

1. Before installing and using the XG 850 Watt Series Programmable

DC Power Supply, read all instructions and cautionary markings on

the XG and all appropriate sections of this Manual.

2. The XG is for indoor use only. Do not expose the XG to moisture. To

reduce risk of fire hazard, do not cover or obstruct the ventilation

openings. Be sure to install the XG in a compartment which allows air

to reach the ventilation inlets on the front and rear of the unit to

prevent overheating. For more information, see “Ventilation” on

page 2–4.

3. To avoid a risk of fire and electric shock, make sure that the existing

wiring is in good condition and the wire is not undersized. Do not

operate the XG with damaged or substandard wiring.

4. Do not operate the XG if it has received a sharp blow, been dropped,

or otherwise damaged in any way. If the XG is damaged, see

“Warranty and Product Information” on page WA – 1 .

5. Do not disassemble the XG. It contains no user-serviceable parts. See

the “Warranty and Product Information” on page WA –1 for

instructions on obtaining service. Attempting to service the XG

yourself may result in a risk of electrical shock or fire. Internal

capacitors remain charged after all power is disconnected.

6. To reduce the risk of electrical shock, disconnect AC power from the

XG before attempting any maintenance or cleaning or working on

any circuits connected to the XG. Turning off controls will not reduce

this risk.

WARNING: Keep these instructions

This chapter contains important safety and operating instructions. Read and keep

this Operating Manual for future reference.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xantrex Stromversorgung Handbücher

Xantrex

Xantrex TM-XDSL-01XN Bedienungsanleitung

Xantrex

Xantrex XPower Powerpack 300 Bedienungsanleitung

Xantrex

Xantrex GPIB-XPD Bedienungsanleitung

Xantrex

Xantrex ACCB-L Bedienungsanleitung

Xantrex

Xantrex Freedom e-GEN Bedienungsanleitung

Xantrex

Xantrex XPF 35-10 Bedienungsanleitung

Xantrex

Xantrex XPR 10-600 Bedienungsanleitung

Xantrex

Xantrex XKW 600-1.7 Bedienungsanleitung

Xantrex

Xantrex XPower Powerpack 300 Plus Bedienungsanleitung

Xantrex

Xantrex XPD 120-4.5 Bedienungsanleitung

Xantrex

Xantrex XPH 75-2D Bedienungsanleitung

Xantrex

Xantrex XPH 35-4D Bedienungsanleitung

Xantrex

Xantrex GRIB and Ethernet interface Bedienungsanleitung

Xantrex

Xantrex XMP 2600 Betriebsanleitung

Xantrex

Xantrex XDC Bedienungsanleitung

Xantrex

Xantrex XPower 300 Bedienungsanleitung

Xantrex

Xantrex XTR 33-25 Bedienungsanleitung

Xantrex

Xantrex XDL 35-5 Bedienungsanleitung

Xantrex

Xantrex RS232-XHR Bedienungsanleitung

Xantrex

Xantrex Powerpack 100 Bedienungsanleitung

Xantrex

Xantrex Jazz 250 Bedienungsanleitung

Xantrex

Xantrex XFR 7.5-140 Bedienungsanleitung

Xantrex

Xantrex XTR 850 Watt Bedienungsanleitung

Xantrex

Xantrex RS232-XPD Bedienungsanleitung

Beliebte Stromversorgung Handbücher anderer Marken

Monacor

Monacor PS-12CCD Bedienungsanleitung

VOLTIMA

VOLTIMA MagicBox 15 Bedienungsanleitung

Miller

Miller Auto Deltaweld 452 Bedienungsanleitung

BCP

BCP PUOUBK Merkblatt

HC 2210 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6032A Bedienungsanleitung

Puls

Puls CT5.241 Bedienungsanleitung

OCZ

OCZ ZX1250W Bedienungsanleitung

iseg

iseg ECH 238 Bedienungsanleitung

Agilent Technologies

Agilent Technologies 6631B Bedienungsanleitung

Power

Power XXL A Series Bedienungsanleitung

Renogy

Renogy PHOENIX 300 Bedienungsanleitung

HP 6200B Service-Handbuch

Epson

Epson Stylus Scan 2500 Betriebsanleitung

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Bedienungsanleitung

Puls

Puls MiniLine ML50.100 Bedienungsanleitung

Puls

Puls AS-Interface SLA4.100 Bedienungsanleitung

Kenwood

Kenwood PS-60 Bedienungsanleitung