Xerox X2 Bedienungsanleitung

X2 TECH, X2 Graphic

Printer User Guide

701P36677 February 2001

Introduction i

Introduction

This Introduction overviews the ColorgrafX X2. Additionally, this

chapter provides information on how to use this guide as well as

the location of information you will need to operate, maintain,

and service the ColorgrafX X2.

Welcome to the ColorgrafX X2

Congratulations on acquiring your new ColorgrafX X2.

Xerox Engineering Systems (XES) looks forward to helping you

increase your organizational productivity through full XES

support with the ColorGrafX hardware, software, supplies, and

service.

Your ColorgrafX X2 is a flexible, high speed six-color (graphics

model) or four-color TECH model) inkjet printer, with piezo head

technology. The printer produces vivid, near photographic quality

prints. Its two media input rolls, automatic cutter, extra large ink

capacity, and heavy-duty design make this production printer

ideal for high volume print production. The compact footprint,

quiet printing, auto-alignment, auto-cleaning and permanent

heads (no more replacing cartridges in the middle of a print

operation) also make this printer ideal for the in-house corporate

graphics environment.

About this guide

This user guide contains information you need to operate and

maintain the ColorgrafX X2 safely and efficiently. Please read

this guide carefully. Always refer to this user guide if a problem

occurs during the use of the ColorgrafX X2.

ii Introduction

About this guide (con’t)

Conventions

Special conventions are used in this user guide to help you get

the most from the guide.

Typefaces and symbols in the guide identify terms and

conditions. The table below provides you with a description of

the typefaces and symbols used in this user guide.

Typeface Symbol Description

Bold None Identifies an action to perform, like press a button or select

an area on the touch screen It also identifies terms, a

feature, an option or message.

Example 1: Select print.

Example 2: The ready to copy message is displayed.

Example 3: The normal R/E screen is displayed.

Italic None Identifies a chapter or section title in this guide. For more

information refer to the chapter or the section title.

Italic

Note: The symbol on the left and the word note at the

beginning of a sentence indicates additional information,

explanations, and helpful suggestions.

Bold and

Normal

Caution: The symbol on the left and the word Caution at

the beginning of a sentence alerts the user that certain

operations or procedures may cause damage to the

machine.

Bold

WARNING: The symbol on the left and the word

warning at the beginning of a sentence alerts the user to

an operation that could cause injury to them.

Normal

This symbol identifies a web site address.

Normal This symbol identifies a phone number.

Introduction iii

About this guide (con’t)

Organization

The ColorgrafX X2 user guide contains seven chapters and two

appendices. Each chapter may contain several sections. This

section provides you with a brief overview of each chapter.

For detailed information, refer to the appropriate chapter and

section.

Introduction This chapter provides customer support, compliance, legal

issues, safety information, and the phone numbers for service

and supplies.

Getting to know

the ColorgrafX X2 This chapter introduces you to the ColorgrafX X2’s features and

components.

Operation This chapter describes the procedures to operate the ColorgrafX

X2, including menu options used at the printer’s operation panel.

Supplies This chapter provides the procedures to replace inks and media

as well as the requirements to properly store your supplies to

ensure optimal print quality.

Maintaining

Print quality This chapter provides detailed procedures to adjust the printer

for clear, sharp print output with maximum resolution and sharp

details.

Jam clearance This chapter provides the procedures to clear media jams from

both the media transport and the cutter assembly.

Appendix A

In case of difficulty Appendix A provides problem solving information. When a

machine problem occurs, go to this section first to assist you with

troubleshooting the problem. This chapter also provides the

phone number to call for service.

Appendix B

Menu tree Appendix B provides a complete operations panel menu tree

along with associated descriptions of each option.

iv Introduction

Customer support

Service

Should you be unable to resolve a problem, place a call to your

Xerox Engineering Systems service representative.

Your service representative will assist you in keeping your

ColorgrafX X2 operating and if required, arrange for a customer

service engineer to inspect your ColorgrafX X2 and restore its

performance.

When you call service you will need the machine serial number.

You can determine the serial number from the label located on

the rear of the unit.

Fill in each item below. When you call for service, they will

request this information.

Customer account name:

Customer account number:

Machine type:

Machine serial number:

Purchase date:

Please call your Xerox Engineering Systems service representative.

For more information, visit the Xerox Engineering Systems web site

at http://www.xes.com.

Supplies

To order supplies for the ColorgrafX X2, call your Xerox Engineering

Systems representative.

For more information, visit the Xerox Engineering Systems web site

at http://www.xes.com.

Introduction v

Compliance information

FCC Compliance in the USA

WARNING: This equipment has been tested and found to

comply with the limits for a Class A computing device pursuant

to Subpart B of Part 15 FCC Rules.

This equipment generates, uses, and can radiate radio

frequency energy and, if it is not installed and used in

accordance with the instruction guide, may cause interference to

radio communications. These limits are designed to provide

reasonable protection against such interference when operated

in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case the

user, at his own expense, will be required to take whatever

measures may be required to correct the interference.

EME Compliance in Canada

This digital apparatus does not exceed the Class A limits for

radio noise emissions from digital apparatus set out in the radio

interference regulations of the Canadian Department of

Communications.

Conformité EEM

Cet appareil numérique est conforme aux limites d'émission de

bruits radioélectriques pour les appareils de classe A stipulées

dans le Règlement sur le brouillage radioélectrique du Ministère

des Communications du Canada.

vi Introduction

It’s illegal

In the USA

It is against U.S. law to reproduce copyrighted material without

the permission of the copyright owner unless the copying falls

within the "Fair Use" library reproduction rights of the copyright

law.

Further information on these U.S. provisions may be obtained from

the Copyright Office, Library of Congress, Washington, D.C. 20550,

or telephone the Copyright Office at (202) 707-9100 and ask for

circular 21. Copying other items may be prohibited. If you have any

questions seek legal advice.

In Canada

Parliament, by statute, has forbidden the copying of the following

subjects under certain circumstances. Penalties of fines or

imprisonment may be imposed on those guilty of making such

copies.

Current bank notes or current money.

Obligations or securities of a government or bank.

Exchequer bill paper or revenue paper.

The public seal of Canada or of a province, or the seal of a

public body or authority in Canada, or of a court of law.

Proclamations, orders, regulations or appointments, or notices

thereof (with intent to falsely cause same to purport to have been

printed by the Queen’s Printer for Canada, or the equivalent

printer for a province).

Marks, brands, seals, wrappers, or designs used by or on behalf

of the Government of Canada or of a province, the government

of a state other than Canada, or a department, board,

commission or agency established by the Government of

Canada, or a province or a government of a state other than

Canada.

Impressed or adhesive stamps used for the purpose of revenue

by the Government of Canada or a province or the government

of a state other than Canada.

Documents, registers, or records kept by public officials charged

with the duty of making or issuing certified copies thereof, where

the copy falsely purports to be a certified copy thereof.

the consent of the copyright or trademark owner.

The above list is provided for your convenience and assistance,

but is not all-inclusive, and no liability is assumed for its

completeness or accuracy. In case of doubt, consult your

solicitor.

Introduction vii

Safety notes

Your system has been designed and tested to meet strict safety

requirements. These include safety agency examination and

approval plus compliance with established environmental

standards.

WARNING: Failure to follow the recommendations in this

section may result in personal injury or rescinding of the

machine operation agreement.

Maintenance safety

Follow all warnings and instructions marked on or supplied with

the product.

Unplug the units from the wall outlet before cleaning the exterior.

Always use materials specifically designated for the ColorgrafX

X2. Use of other materials may result in poor performance and

could create a hazardous situation.

Do not use aerosol cleaners. Follow the instructions in this

operator guide for the correct cleaning methods.

Never use supplies or cleaning materials for purposes other than

what they were intended. Keep all supplies and materials out of

the reach of children.

Do not use the units near water, wet locations, or outdoors.

The components of this product are equipped with a three-wire,

grounding-type plug (i.e., a plug having a grounding pin). This

plug will only fit into a grounding-type power outlet. This is a

safety feature. To avoid the risk of electric shock, contact your

electrician to replace the receptacle if you are unable to insert

the plug into the outlet.

Never use a ground adapter plug to connect the system to a

power source that lacks a ground connection terminal.

This system should be operated from the type of power source

indicated on the marking label. If you are not sure of the type of

power available, consult your local power company.

The power supply cord is the disconnect device for this

equipment. Make sure that the installation is near the socket

outlet and is easily accessible.

Do not allow anything to rest on the power cord. Do not locate

the units where someone will step on the cord.

The units should not be placed in a built-in installation unless

correct ventilation is provided.

viii Introduction

Safety notes (con’t)

Maintenance safety (con’t)

Never push objects of any kind into the slots of the units as they

may touch dangerous voltage points or short out parts that could

result in a risk of fire or electric shock.

Never spill liquid of any kind on the units.

Never remove any covers or guards that require a tool for

removal. There are no operator serviceable areas within these

covers.

Never attempt any maintenance function that is not specified in

this operator guide.

Never defeat interlock switches. Machines are designed to

prevent operator access to unsafe areas. Covers, guards, and

interlock switches are provided to ensure that the system will not

operate with the covers opened.

If the power plug is used as a disconnect device, instructions

shall comply with UL 1950 Sec. 1.7.2. The power switch does

not break power to the low voltage power supply.

Unplug the reprographic system from the wall outlet and call for

service under the following conditions:

When the power cord is damaged or frayed.

If the gas piston springs in the upper cover of the printer lose

their strength.

If liquid has been spilled into the product.

If the units have been exposed to rain or water.

If the units are producing unusual noises or odors.

If the units or the cabinets have been damaged.

If you need additional safety information concerning the

ColorgrafX X2 or XES supply materials, call:

Please call your Xerox Engineering Systems representative.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Xerox Drucker Handbücher

Xerox

Xerox Versant 2100 Press Bedienungsanleitung

Xerox

Xerox 8860DN - Phaser Color Solid Ink Printer Bedienungsanleitung

Xerox

Xerox Phaser 3400 Bedienungsanleitung

Xerox

Xerox ColorQube 8900 series Bedienungsanleitung

Xerox

Xerox 7700 Bedienungsanleitung

Xerox

Xerox 7400DXF - Phaser Color LED Printer Service-Handbuch

Xerox

Xerox PHASER 7500 Service-Handbuch

Xerox

Xerox 4400DX - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox Phaser 2135DT Bedienungsanleitung

Xerox

Xerox Phaser 6120 Bedienungsanleitung

Xerox

Xerox DocuPrint 180 IPS Series Technisches Handbuch

Xerox

Xerox Phaser 8860 Bedienungsanleitung

Xerox

Xerox Phaser 3450 Bedienungsanleitung

Xerox

Xerox DocuPrint 180 Benutzerhandbuch

Xerox

Xerox DocuColor 3535 Bedienungsanleitung

Xerox

Xerox Phaser 790DP Bedienungsanleitung

Xerox

Xerox DocuPrint 65 Handbuch

Xerox

Xerox Nuvera 100 Bedienungsanleitung

Xerox

Xerox WorkCentre Pro 423 Bedienungsanleitung

Xerox

Xerox 4050 Technisches Handbuch

Xerox

Xerox 3117 - Phaser B/W Laser Printer Bedienungsanleitung

Xerox

Xerox VersaLink C7000 Bedienungsanleitung

Xerox

Xerox Nuvera 100 Handbuch

Xerox

Xerox Phaser 6180 Betriebsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung