XtendLan DPG-IP-G21 Bedienungsanleitung

English

USER MANUAL

ＳＯＳ

DPG-IP-G21

1.Parts and Functions

ＳＯＳ

LCD Screen

Alarm Button

Microphone

Unlock Button

Call Button

LED Indicator

Handset

Speaker

Handset Line

Dimension:220(H) x 358(W) x 35(D)mm

Key functions:

Microphone Receives sound from the user.

LCD Screen Display the icon menu and images .Touch operation.

Alarm Button Flash when the guard unit receives alarm record.

LED Indicator

1. Red indicator ash rst, green indicator ash later when power on.

2. Blue indicator ormally on when work in normal.

3. Blue indicator ash when in calling state.

4. Red indicator ash when in talking state.

Unlock Button Press to release the door for visitors during talking or monitoring.

Call Button Press to activate the intercom function page.

Handset Pick up to talk with the visitors or users

Speaker Output sound from the visitors or users

Handset Line Connect guard unit with handset

The Main menu is your starting point for using all

the applications on the guard unit. To open the

main menu page, touch the LCD screen anywhere

twice.

2.Specication

3.About Main Menu

Power supply: DC 14~30V

Power consumption: Standby 6W; Working status 13W

Working temperature: -100C~550C

Alarm record: 1000 pieces

Calls record: 600 pieces

Screen: 10 inch digital TFT LCD

Video signal: 1Vp-p, 75Ω, CCIR standard

Wiring: CAT5 cable

Dimension: 220(H) x 358(W) x 35(D)mm

Answer calls from door station

• Input "0000" on door station to call guard unit.

• The Guard Unit rings,and the red LED indicator ash, the vistors' image and the address of

the door station will be shown on screen.Note that the screen will be turned off in limited time

if nobody answers

• If the guard person answers the call ,talking with outdoor is available.

• During talking state,press "unlock" button to release the door.

• If the guard unit is busy,calling from door station is unavailable.

4.Operation Instructions

Calling users

Calling door station or common door station

• On main menu page,touch "Intercom" icon, or press "Call" button in standby mode on Guard

Unit to open intercom page. Input block and room number by touching digital keypad on

Guard Unit, for example,the block is 124,the room number is 0001,you should input 124-

0001,then touch "dial" icon to activate the calling.(during inputting,press " * " key to cancel)

• If the room number is error,the guard unit will send out "Di,Di,Di" and a message of "calling

fail" will be shown.

• If the user answers the call,the guard person can talk with the user immediately.

• The system will cut off automatically if exceeds the maximum calling waiting time in calling

state or exceeds maximum talking time in talking state.

• On main menu page,touch "Intercom" icon, or press "Call" button in standby mode on Guard

Unit to open intercom page. Input the address of door station by touching digital keypad

on Guard Unit, for example,to call the 1st door station of B block.you should input B-1.then

touch "dial" icon to activate the calling.(during inputting,press " * " key to cancel)

• Calling door station or common door station by list is also available.on intercom page,press

"list" icon, touch one item,then touch "dial" icon to call.

• If the number is correct, calling is activated immediately when the door station is free,the

guard unit can talk with outdoor. During talking,press "unlock" icon to release the door.

• The system will cut off automatically if exceeds the maximum calling waiting time in calling

state or exceeds maximum talking time in talking state.

Answer calls from users

Answer calls from common door station

• Select "Direct call guard unit" on monitor to call Guard Unit.(please refer to monitor user

manual for more detail information)

• The Guard Unit rings,and the red LED indicator flash, the address of the monitor will be

shown on screen.Note that the screen will be turned off in limited time if nobody answers

• If the guard person answers the call ,talking with user is available.

• The operation is the same as calling from door station.

• On main menu page,touch " Manual Monitor" icon to open monitor page. Input the address

of door station by touching digital keypad on guard unit, for example,to monitor the 1st

door station of B block.you should input B-1.then touch "Monitor" icon to monitor.(during

inputing,press " * " key to cancel)

• Monitoring door station or common door station by list is also available.on monitor

page,press "list" icon, touch one item,then touch "monitor" icon to see conditions of door

station.

• If the number is correct, monitoring is activated immediately when the door station is free.

During monitoring,press "unlock" icon to release the door.

• The system will cut off automatically if exceeds maximum monitor time.

• On main menu page of the Guard Unit,touch " Event->Alarm record"to enter alarm record

page,the latest record will be shown on rst item.

• All alarm records ,the current record ,the alarm type, alarm time and the address of monitor

will be displayed .

• If the system has no alarm records,it will show "have no record !".

• Press "Page Up" to see last page alarm records,and press "Page Dn" to see next page alarm

records.

• Press one of alarm record item to enter alarm status page, then press "Dial" icon to call the

User alarms to Guard Unit

Entrance monitoring

Checking alarm records for monitor

• Select "Call Guard Unit" on monitor to alarm guard unit.(please refer to monitor user manual

for more detail information)

• The Guard Unit will send out a soud of buzzer and the alarm button will ash in red when

receives alarm signal. At the same time, the address of the monitor will be shown on screen.

The latest alarm record will be displayed on rst item.

• Press one of alarm record to enter alarm status page,the buzzer will stop ringing,and the

alarm indicator will stop ash.

• At alarm status page,press "dial" icon to call back the current monitor.

• If the user answers the call,the guard person can talk with the user immediately.

• The system will cut off automatically if exceeds the maximum calling waiting time in calling

state or exceeds maximum talking time in talking state.

• On main menu page,touch " Event->Event clear".A password will be asked. Input the

password by touching the digital keypad,1234 is the default password,the password can be

modied at any time.

• All call records and alarm records will be cleared.

Clear all call records and alarm records

5.System Tools

• Touch "User Setup->System Tools" on main menu page of the Guard Unit, a password will

be asked. 2412 is the default password.

• Input the code number by touching the digital keypad, press " * " key to select the digit, press

" # " key to save the settings.

• When enter the setting page,the IP address of the Guard Unit can be set.

• Each guard unit should be assigned with one IP address in IP system.Input code number of

2108 by touching the digital keypad,then input IP address,the range is from 247~254.

• On main menu page of Guard Unit,touch " Event->Missed calls ",all calls that has not been

answered will be shown .

• Touch " Event->All calls", all calling records ,the latest calling record ,the call type, call time

and the address will be displayed. and If the system has no calling records,it will show "have

no record !".

• Press "Page Up" to see last page calling records,and press "Page Dn" to see next page

calling records.

• Press one of calling record item, then press "Dial" icon to call the current monitor or door

station.

• The calling is the same as Guard Unit calls monitor or door station.

• The system will cut off automatically if exceeds the maximum calling waiting time in calling

state or exceeds maximum talking time in talking state.

Checking all calls record

current monitor.

• If the user answers the call,the guard person can talk with the user immediately.

• The system will cut off automatically if exceeds the maximum calling waiting time in calling

state or exceeds maximum talking time in talking state.

6.Settings

Ring tone setting

Date and time setting

Monitor time setting

Change password

• User call tone, door station call tone,GL call tone can be set different ring tone to distinguish

different calling

• Touch "User Setup" icon on main menu page, then touch "Call Tone Setup", total 6

pieces ring tones will be displayed

• Touch "Ring Type" icon to switch to set User call tone, door station call tone,GL call tone

• Touch "Louder Volume" to select a louder ring tone volume.

• Touch "User Setup" icon on main menu page, then touch "Clock", a digital keypad will be

shown on screen

• Input the date and time by touching the digital keypad, press " * " key to select the digit, press

" # " key to save the settings.

• The date format can be set to DD/MM/YY or MM/DD/YY, touch "Date Format" icon to switch

date format setting

• The time format can be set to 24 hours or 12 hours format, touch "Time Format" icon to

switch time format setting

• To see the current date and time, touch the screen anywhere once in standby mode to open

the calendar page. or enter the status bar.

• Touch "User Setup" icon on main menu page, then touch "Monitor Time Set", a digital

keypad will be shown on screen

• Input the monitor time by touching the digital keypad, press " * " key to select the digit, press

" # " key to save the settings.

• A password will be asked before enter Menu Upgrade ,Event clear and Restore to default

page, the default password is 1234

• Touch "User Setup" icon on main menu page, then touch "Password Setup", a digital

keypad will be shown on screen

• Input the old and new password by touching the digital keypad, press " * " key to select the

digit, press " # " key to save the settings.

SD card

ＳＯＳ

7.Built-in Memory and SD Card

The Guard Unit has been equipped with a built-in memory (about 120 MB) together with a SD

card reader. Maximum 16 GB SD card can be supported.

• The captured pictures will be saved in a folder named by date.

• The captured pictures in the built-in memory can be copied to the SD card, and you should

use T-views memo software tool to convert the pictures to JPG format that can be seen on

the computer.

• When the built-in memory is full,the oldest picture will be deleted to make room for new

record .

Both auto recording and manual recording are available.and auto recording is default. If receive

a call , after a moment, the guard unit will record automatically. one picture will be taken for each

calling.or you can touch Capture icon to record the visitor's image manually.

On main menu page,touch Event->Memory Playback,4 pictures will be displayed in the

memo for each page. you can touch Page up or Page down icon to view last or next picture

memo,or touch Delete all icon to delete all pictures. And you can view the pictures on full screen

by touch Full icon , on full screen mode, touch Last or Next icon to preview last/next picture.or

you can touch Delete icon to delete the current picture you are previewing.press Home icon to

return main menu page.

Picture recording

Picture playback

Note:

• Avoid to plug in/out the SD card when the guard unit is under operation.

• Playing will be interrupted by the calling.

8.Screen and Volume Adjustment

During monitoring or talking, touch

ADJUST

icon, then touch and select the adjustment item you

want; touch / icon to decrease / increase the value.

• The Scene mode selection: Total 4 screen

modes can be selected in sequence:

Normal,

User, Soft

and

Bright.

Whenever you modify

Brightness

colour, Scene

item will be set to

User

mode automatically.

• The

Brightness

and

Color

item is for the image

quality setting, adjust the value to get the best

image you like.

• The

Talk Volume

item is for talking volume adjustment.

• Note that all the modications will be performed immediately after the operation.

Inhaltsverzeichnis

Andere XtendLan Gegensprechanlage Handbücher

XtendLan

XtendLan DPM-D271TMD Bedienungsanleitung

XtendLan

XtendLan DPM-535 Bedienungsanleitung

XtendLan

XtendLan DPC-441 Bedienungsanleitung

XtendLan

XtendLan DPC-D250 series Bedienungsanleitung

XtendLan

XtendLan DPC-IP100 Bedienungsanleitung

XtendLan

XtendLan DPC-D244-K Bedienungsanleitung

XtendLan

XtendLan DPC-511 Bedienungsanleitung

XtendLan

XtendLan DPM-473AD Bedienungsanleitung

XtendLan

XtendLan DPC-D244-R Bedienungsanleitung

XtendLan

XtendLan DPC-D268 Bedienungsanleitung

XtendLan

XtendLan DT607 Series Bedienungsanleitung

XtendLan

XtendLan DPM-473M Bedienungsanleitung

XtendLan

XtendLan DPM-IP700 Bedienungsanleitung

XtendLan

XtendLan DPC-IP101ID Bedienungsanleitung

XtendLan

XtendLan DPC-D247 Bedienungsanleitung

XtendLan

XtendLan DPC-D218ID Bedienungsanleitung

XtendLan

XtendLan DPC-434 Series Bedienungsanleitung

XtendLan

XtendLan DPP-D202 Bedienungsanleitung

XtendLan

XtendLan PM-IP-701TMD Bedienungsanleitung

XtendLan

XtendLan DPC-W110-ID Bedienungsanleitung

XtendLan

XtendLan DPK-242 Bedienungsanleitung

XtendLan

XtendLan DPC-D248-K Bedienungsanleitung

XtendLan

XtendLan DPC-D241-1 Bedienungsanleitung

XtendLan

XtendLan DPC-D246A Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung