XtendLan MATRIX1608A Bedienungsanleitung
MATRIX1608A
Video Matrix Switcher
User’s Guide
Matrix1608A User's guide www.xtendlan.com
2
Contents
1SafetyAttentionNotes..........................................................................................................................4
2Features................................................................................................................................................5
3Connection............................................................................................................................................5
3.1Video/AudioOutputconnect.................................................................................................................5
3.2Video/AudioInputconnect....................................................................................................................5
3.3Communicationconnect........................................................................................................................5
3.3.1RS485Communication(Dome).......................................................................................................6
3.3.2RS232Communication...................................................................................................................7
3.4Alarmoutconnect..................................................................................................................................7
3.5Videomatrixconnectaudiomatrix........................................................................................................7
4Systemsetting.......................................................................................................................................8
4.1Settingprotocol......................................................................................................................................8
4.2KeyboardParametersSet.......................................................................................................................8
4.2.1KeyboardIDNoSet.........................................................................................................................9
4.2.2KeyboardBaudRateSet.................................................................................................................9
4.2.3Key‐pressSoundSet.......................................................................................................................9
4.2.4MatchingResistance(150Ω)Set.....................................................................................................9
4.2.5KeyboardProtocolSet....................................................................................................................9
4.2.6KeyboardTest..............................................................................................................................10
4.2.7MaxSlaveControlNumberSet10................................................................................................10
4.2.8MaxAlarmSet11..........................................................................................................................10
5Systemkeyboard.................................................................................................................................11
5.1KeyboardOverview.............................................................................................................................11
5.2IntelligentKeyboardTechnicalParameters.........................................................................................11
6IntelligentKeyboardDrawing..............................................................................................................11
6.1IntelligentKeyboardConnection.........................................................................................................11
6.2KeyboardConnectionwithDomeCamera..........................................................................................11
6.2.1CameraLenscontrol....................................................................................................................12
7KeyboardParametersSetting..............................................................................................................13
7.1KeyboardParametersSet....................................................................................................................13
7.1.1KeyboardIDNoSet......................................................................................................................13
Matrix1608A User's guide www.xtendlan.com
3
7.1.2KeyboardBaudRateSet..............................................................................................................13
7.1.3Key‐pressSoundSet....................................................................................................................14
7.1.4MatchingResistance(150Ω)Set..................................................................................................14
7.1.5KeyboardProtocolSet.................................................................................................................14
7.1.6KeyboardTest..............................................................................................................................14
7.1.7MaxViceControlNumberSet10..................................................................................................15
7.1.8MaxAlarmSet11..........................................................................................................................15
8IntelligentKeyboardOperation...........................................................................................................15
8.1KeyboardCommunicationAddressSet...............................................................................................15
8.2KeyboardControlforDomeCamera...................................................................................................15
8.3AutoScanning(2PointsScanning,360°Scanning)...............................................................................16
8.4SetPresetPosition...............................................................................................................................16
8.5ViewPresetPosition............................................................................................................................17
8.6
PresetPosition
ParameterSetfortheDome(Vinetprotocolhasthisfunction)
15
.......................................17
8.6.1PresetPositionSpeedandDwellTimeSet..................................................................................17
8.6.2PatternToursSet16.....................................................................................................................18
8.7GuardLocationSet..............................................................................................................................20
8.8GuardLocationParameterSet............................................................................................................20
8.9IntelligentKeyboardMenuSetfor......................................................................................................21
9AuxiliaryFunctionSet..........................................................................................................................21
9.1WashBrushSet17.................................................................................................................................21
9.2HeatingSet18.......................................................................................................................................21
9.3AuxiliarySwitch1Set...........................................................................................................................21
9.4AuxiliarySwitch2Set...........................................................................................................................22
9.5ProportionJoystick..............................................................................................................................22
10ExceptionHandles...............................................................................................................................23
11Key‐pressFunction..............................................................................................................................23
11.1PELCO_DProtocolOperating..............................................................................................................23
12Specification........................................................................................................................................24
Matrix1608A User's guide www.xtendlan.com
4
1 Safety Attention Notes
◎ Please read the instructions thoroughly before installing or operating the unit.
◎ Please do not put the machine on an unstable table or mounting bracket.
◎ Please prevent all liquids or other contaminating material from entering into
the matrix housing.
◎ When connecting to the power source, please follow all electric safety
standards and only use the power supply designated for this device. The
matrix’s RS-485 and video signal uses TVS technology to protect it from
strong electric surges. This technology prevents damage to the device
resulting from impulse signals such as lightning strikes or surges under 500W
power. Allow for enough distance between the RS-485 and video signals and
high-voltage equipment or cables during the transmission process. Please do
not power the unit until all connections are secure and installation is
complete.
◎ When the machine is not operating properly, do not casually repair it. Refer to
the instructions for information about how to service or repair your matrix.
◎ Please protect the unit against extremes of vibration, pressure or dampness
while transporting unit. Damage can occur from improperly packaging the
unit while shipping.
◎ Please only install the indoor environments.
Matrix1608A User's guide www.xtendlan.com
5
2 Features
•Camera title input through PC, Built-in IP Port
•Adopt built-in IP Control Mode and Video server, the operation of mainframe and video switch are
controled via IP; Support IE
•Plug-in scalable high density architecture for easy expansion, 2U Standard aluminium alloy case
•Passord protection to prevent unauthorized operating; System partitioning with different keyboard priorities
•Video/audio port and communications port with surge protection and lightning protection
•Video/audio switch card, alarm input card, follow control card integrated as surveillance mainframe.
•One dominant control keyboard and connect 16 branch keyboards
•All functions of matrix can be set through Menu, Input and output with loop design
•Auto turn on pick-up sensor and light, auto switch image and start recording after alarming.
•Alarm mode: Timed, manual, normally alarm arming/ alarm disarming and alarm recording
•Various protocols controlling P/T and high speed camera, such as PELCO-D, PELCO-P, KALATEL, Vinet
protocol, baud rate optional.
•Computer backup for system set, hot backup mainframe option design
3 Connection
connecting wire are diagramed below for reference
3.1 Video/Audio Output connect
connecting wire are diagramed below for reference
3.2 Video/Audio Input connect
connecting wire are diagramed below for reference
3.3 Communication connect
RS485 Communication: two RS485 Communication port
RS232 Communication port(Connect PC)。
2.3.1 RS485 Communication(keyboard)
RS232
LAN
1
POWER IN
Video/Audio
Output
RS232Communication
AC220V
2
3
4
Video/Audio
Input
AUX2
AUX1
SYS
PTZ
B
G
A
KEY
B
G
A
B
G
A
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
61
62
63
64
PTZ
Matrix1608A User's guide www.xtendlan.com
6
connecting wire are diagramed below for reference
Keyboard connecting wire are diagramed below for reference。
3.3.1 RS485 Communication(Dome)
connecting wire are diagramed below for reference
AUX2
AUX1
RS485B
GND
RS485A
SYS
RS485B
GND
RS485A
PTZ
RS485B
GND
RS485A
KEY Connect Keyboard or
Alarmer
Iris
Open
Iris
Close
Focus
Far
Focus
Near
Zoom
Tele
Zoom
Wide
DVR MPX
↑
Scan
←
Auto
↓
Shif
t
Pan_
A
Call
→
COM ALARM LINK/ACK10/100M
Logi
nExit
789
456
123
Clea
r0Ente
r
Enabl
e
AREA MON CAM
ACK List
GRP SEQ Next
AREA MON CAM DATA
00 01 0001 0000
B2 A2 GNDB1A1
RS232
LAN
1
POWER IN
Video/Audio
Output
RS232Communication
AC220V
2
3
4
Video/Audio
Input
AUX2
AUX1
SYS
PTZ
B
G
A
KEY
B
G
A
B
G
A
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
61
62
63
64
PTZ
AUX2
AUX1
RS485B
GND
RS485A
SYS
RS485B
GND
RS485A
PTZ
RS485B
GND
RS485A
KEY
Connect Dome
Matrix1608A User's guide www.xtendlan.com
7
3.3.2 RS232 Communication
RS232 connect PC,Alarm equipment etc.
Note：When keyboard controler control matrix system，RS232 Port must be taken out 。
3.4 Alarm out connect
connecting wire are diagramed below for reference
3.5 Video matrix connect audio matrix
connecting wire are diagramed below for reference
AUX2
AUX1
RS485B
GND
RS485A
SYS
RS485B
GND
RS485A
PTZ
RS485B
GND
RS485A
KEY
Connect Audio
matrix
AUX2
AUX1
RS485B
GND
RS485A
SYS
RS485B
GND
RS485A
PTZ
RS485B
GND
RS485A
KEY
Two alarm
output
Matrix1608A User's guide www.xtendlan.com
8
4 System setting
4.1 Setting protocol
Set protocol and baud rate,matrix switcher control dome（Default setting is PELCO_D protocol,Baud rate
2400Bit/s）the communication protocol, baud rate, should be confirmed. Set the code switch, keeping the
setting consistent with the dome system. The relative code switch site and connecting wire are diagramed
below for reference.
Protocol setting are tabled below for reference.
Switch bit1 and bit2
BIT 1 BIT 2 Protocol
OFF OFF PELCO_D
ON OFF PELCO_P
OFF ON KALATE
ON ON Vinet
Baud rate setting are tabled below for reference.
Switch bit3 and bit4
BIT 3 BIT 4 Baud Rate
OFF OFF 9600Bit/s
ON OFF 4800Bit/s
OFF ON 2400Bit/s
ON ON 1200Bit/s
4.2 Keyboard Parameters Set
Press “SHIFT+EXIT” key enter Keyboard main Menu
Then Press “MPX” or “Auto” key until LCD displays:
Press “Enter” key into keyboard set up Menu. Press “MPX” or “Auto” key, to enter the subMenu.
2)Keyboard setup
2
Switch
134
ON DIP
Matrix1608A User's guide www.xtendlan.com
9
Press “EXIT” key to exit to the main Menu.
4.2.1 Keyboard ID No Set
Press”Enter” key on keyboard screen “Keyboard setup” until LCD displays:
Input the number 0(must be zero), press “Enter” key for confirmation. New ID will be in effect immediately.
Note: ID:00 Main Control Keyboard6,
4.2.2 Keyboard Baud Rate Set
Press “MPX” or “Auto” key until LCD displays:
Optional baud rate: 9600(must be 9600) Default baud rate: 9600bps.
Input your required baud rate in DATA area, and press “Enter” key for confirmation. New baud rate is in
effect immediately.
4.2.3 Key-press Sound Set
Press “MPX” or “Auto” key until LCD displays:
Press < SHIFT+MON > key showing “ON”; turns on the sound function. Press “Enter” key for confirmation.
Press< SHIFT+CAM > key showing “OFF”; turns off the sound function. Press “Enter” key for confirmation.The
normal sound status is open.
4.2.4 Matching Resistance (150Ω) Set
Press “MPX” or “Auto” key three times until LCD displays:
Press< SHIFT+MON > key showing “ON”, this will place suited resistance between RS485 D+ and D-,
Press< SHIFT+CAM > key showing “OFF”, this will separate suited resistance from RS485 D+ and D-,
Press “Enter” key for confirmation. The normal status is open.
4.2.5 Keyboard Protocol Set
Press “MPX” or “Auto” key four times until LCD displays:
Press “1” key showing “Vinet” protocol, press “Enter” key for confirmation.
Note:must be “Vinet”
Current keyboard ID No.
Input New ID No.
1.Cur.Keyboard ID:XX
0=Mast
,
1→16=Slave:XX
Current baud rate.
Input new baud rate
2.Cur.Baud Rate:XXXX
12/24/48/9600:XXXX
Displays current set
Select Sound preference
3.Current sound: ON
Your select:
Displays the current set
4.Match resister:ON
Your select:ON
Displays the current set
5.Protocol:Vinet
New Protocol:
Matrix1608A User's guide www.xtendlan.com
10
4.2.6 Keyboard Test
Press “MPX” or “Auto” key until LCD displays:
Press “Enter” key for confirmation, a blank screen will appear. Press any key except the <EXIT> key, the
relative name will display on the screen.
Press <EXIT> to leave the testing status and return to the main Menu.
4.2.7 Max Slave Control Number Set 10
Press “MPX” or “Auto” key until LCD displays:
Input number(00-16), Press “ Enter” key for confirmation.
△
! If the keyboard is set as:01,02…16,it will be considered as the total slave control keyboard
quantity separately.
4.2.8 Max Alarm Set 11
Press “MPX” or “Auto” key until LCD displays:
Input number, the biggest alarm input terminal number is 239. Press “Enter” key for confirmation.
6.Keyboard test
Default Setting
7.MAX(16) SLAVE ID:XX
In
p
ut new ID:XX
Default setting
8.MAX(239) ALARM ID:XX
In
p
ut new ID:XX
Inhaltsverzeichnis
Andere XtendLan Matrix-Umschalter Handbücher
