Xylem FLYGT SmartRun SRC 311 Bedienungsanleitung

SRC 311 - SmartRun™

User guide

Table of Contents

Introduction and Safety.........................................................................................................................2

SRC 311................................................................................................................................................2

Electromagnetic Compatibility..........................................................................................................3

Important Safety Information.............................................................................................................3

Installation...............................................................................................................................................6

Mechanical Installation.......................................................................................................................6

Dimensions........................................................................................................................................6

Torque values for installation..........................................................................................................7

Mounting clearance..........................................................................................................................8

Removing the Terminal Cover........................................................................................................9

Electrical Installation.........................................................................................................................10

Grounding the Drive......................................................................................................................10

Wiring Precautions.........................................................................................................................11

Incoming Power Connection........................................................................................................11

Drive and Motor Connection........................................................................................................12

Motor Terminal Box Connections................................................................................................12

Control Terminal Wiring................................................................................................................12

System Description..............................................................................................................................15

Display and buttons..........................................................................................................................15

Communication.................................................................................................................................15

Technical Reference............................................................................................................................17

Facility requirements........................................................................................................................17

Input voltage......................................................................................................................................17

Maximum supply ratings for UL- compliance................................................................................18

Output power and current ratings..................................................................................................18

Table of Contents

SRC 311 - SmartRun™User guide 1

Introduction and Safety

SRC 311

Frame Size 2 - 3 Frame Sizes 4 - 6



UVW

L2/N

L1/N

L1 L2 L3

PEL1 L2 L3

1. Mechanical mounting, see Mechanical Installation (page 6).

2. Display (Status, Diagnostics, and Programming).

3. Keypad Operations see Display and buttons (page 15).

4. Safe torque off (STO) disabled in SRC 311 application by bridging control terminal (1

and 12) and (9 and 13), for more instructions, see Installation, Operation, and

Maintenance manual.

5. Motor cable Sizes, see Output power and current ratings (page 18).

6. Motor connections, check for Star or Delta connection according to the motor

voltage rating.

Motor Nameplate Details:

• Motor rated voltage

• Motor rated current

• Motor rated frequency

• Motor rated speed (Optional)

7. AC Supply Connection, see Output power and current ratings (page 18).

• 200 – 240 V + / - 10%: 1 / 3–Phase

• 380 – 380 V + / - 10%: 3–Phase

8. Fuses or MCB, see Output power and current ratings (page 18).

9. Applies to switched version only In-built Controls: Power On / Off

Introduction and Safety

2 SRC 311 - SmartRun™User guide

Electromagnetic Compatibility

All SRC 311 are designed with high standards of EMC in mind. All versions suitable for

operation on 1–phase 230-V and 3–phase 400-V supplies, and intended for use within the

European Union, are ﬁtted with an internal EMC ﬁlter. This EMC ﬁlter is designed to reduce

the conducted emissions back into the supply via the power cables for compliance with

harmonized European standards. It is the responsibility of the installer to ensure that the

equipment or system into which the product is incorporated complies with the EMC

legislation of the country of use. Within the European Union, equipment into which this

product is incorporated must comply with the EMC Directive 2004/108/EC. When using an

SRC 311 with an internal or optional external ﬁlter, compliance with the following EMC

Categories, as deﬁned by EN61800-3:2004 can be achieved:

Drive Type / Rating EMC Category

Cat C1 Cat C2 Cat C3

1 Phase, 230-Volt Input

SRC311-X-2-XXXXX-XX No additional ﬁltering required

Use screened motor cable

3 Phase, 400-Volt Input

SRC311-X-4-XXXXX-XX Use External Filter No additional ﬁltering required

Use screened motor cable

Note For motor cable lengths greater than 100 m, an output dv/dt ﬁlter must be used, refer

to the local Sales Partner for further details

Important Safety Information

DANGER: Indicates a risk of electric shock, which, if not avoided, could result in damage to

the equipment and possible injury or death.

DANGER: Indicates a potentially hazardous situation other than electrical, which if not

avoided, could result in damage to property.

Introduction and Safety

SRC 311 - SmartRun™User guide 3

This variable speed drive product is intended for professional incorporation into complete

equipment or systems as part of a ﬁxed installation. If installed incorrectly it may present a

safety hazard. The SRC 311 uses high voltages and currents, carries a high level of stored

electrical energy, and is used to control mechanical plant that may cause injury. Close

attention is required to system design and electrical installation to avoid hazards in either

normal operation or in the event of equipment malfunction. Only qualiﬁed electricians are

allowed to install and maintain this product.

System design, installation, commissioning and maintenance must be carried out only by

personnel who have the necessary training and experience. They must carefully read this

safety information and the instructions in this Guide and follow all information regarding

transport, storage, installation and use of the SRC 311, including the speciﬁed

environmental limitations.

Do not perform any ﬂash test or voltage withstand test on the SRC 311. Any electrical

measurements required should be carried out with the SRC 311 disconnected.

Electric shock hazard! Disconnect and ISOLATE the SRC 311 before attempting any work on it.

High voltages are present at the terminals and within the drive for up to 10 minutes after

disconnection of the electrical supply. Always ensure by using a suitable multimeter that no

voltage is present on any drive power terminals prior to commencing any work.

Where supply to the drive is through a plug and socket connector, do not disconnect until 10

minutes have elapsed after turning off the supply.

Ensure correct earthing connections. The earth cable must be sufﬁcient to carry the maximum

supply fault current which normally will be limited by the fuses or MCB. Suitably rated fuses

or MCB should be ﬁtted in the mains supply to the drive, according to any local legislation or

codes.

Do not carry out any work on the drive control cables whilst power is applied to the drive or to

the external control circuits.

Introduction and Safety

4 SRC 311 - SmartRun™User guide

Within the European Union, all machinery in which this product is used must comply with

Directive 98/37/EC, Safety of Machinery. In particular, the machine manufacturer is

responsible for providing a main switch and ensuring the electrical equipment complies with

EN60204-1.

The level of integrity offered by the SRC 311 control input functions (excluding the ‘Safe

Torque Free Input’) – for example stop/start, forward/reverse and maximum speed, is not

sufﬁcient for use in safety-critical applications without independent channels of protection.

All applications where malfunction could cause injury or loss of life must be subject to a risk

assessment and further protection provided where needed.

The driven motor can start at power up if the enable input signal is present.

The STOP function does not remove potentially lethal high voltages. ISOLATE the drive and

wait 10 minutes before starting any work on it. Never carry out any work on the Drive, Motor

or Motor cable whilst the input power is still applied.

The SRC 311 can be programmed to operate the driven motor at speeds above or below the

speed achieved when connecting the motor directly to the mains supply. Obtain

conﬁrmation from the manufacturers of the motor and the driven machine about suitability

for operation over the intended speed range prior to machine start up.

Do not activate the automatic fault reset function on any systems whereby this may cause a

potentially dangerous situation.

The SRC 311 has an Ingress Protection rating of IP55, and are intended for indoor use only

When mounting the drive, ensure that sufﬁcient cooling is provided. Do not carry out drilling

operations with the drive in place, dust and swarf from drilling may lead to damage.

The entry of conductive or ﬂammable foreign bodies should be prevented. Flammable

material should not be placed close to the drive

Relative humidity must be less than 95% (non-condensing).

Ensure that the supply voltage, frequency and no. of phases (1 or 3 phase) correspond to the

rating of the SRC 311 as delivered.

Never connect the mains power supply to the Output terminals U, V, W.

Do not install any type of automatic switchgear between the drive and the motor

Wherever control cabling is close to power cabling, maintain a minimum separation of 100

mm and arrange crossings at 90 degrees Ensure that all terminals are tightened to the

appropriate torque setting

Do not attempt to carry out any repair of the SRC 311. In the case of suspected fault or

malfunction, contact your local Sales Partner for further assistance.

Introduction and Safety

SRC 311 - SmartRun™User guide 5

Installation

Mechanical Installation

General

•The SRC 311 must be mounted in a vertical position only on a ﬂat, ﬂame-resistant

vibration free mounting using the integral holes.

• The SRC 311 must be installed in a pollution degree 1 or 2 environment only.

•Do not mount ﬂammable material close to the SRC 311.

• Ensure that the minimum mounting clearance is observed as detailed in Mounting

clearance (page 8).

• Ensure that the ambient temperature range does not exceed the permissible limits for

the SRC 311 stated in Environment.

•Provide suitable clean, moisture, and contaminant free cooling air sufﬁcient to fulﬁl the

cooling requirements of the SRC 311 according to Environment.

Before Installation

• Carefully Unpack the SRC 311 and check for any signs of damage. Notify the shipper

immediately if any exist.

• Check the drive rating label to ensure that it is of the correct type and power

requirements for the application.

• Store the SRC 311 in its box until required. Storage must be clean and dry and within

the temperature range –40°C to +60°C.

UL-Compliant Installation

Note the following for UL-compliant installation:

• The drive can be operated within an ambient temperature range that is stated in

Environment.

• Installation in a pollution degree 2 environment is permissible.

• UL Listed ring terminals/lugs must be used for all bus bar and grounding connections.

Dimensions

Frame size 2 – 3

Frame size 2 3

A mm (in) 257.0 (10.12) 310.0 (12.20)

B mm (in) 220.0 (8.67) 276.5 (10.89)

Installation

6 SRC 311 - SmartRun™User guide

Frame size 2 3

C mm (in) 200.0 (7.87) 251.5 (9.90)

D mm (in) 28.5 (1.12) 33.4 (1.31)

E mm (in) 238.0 (9.37) 256.0 (10.08)

F mm (in) 188.0 (7.40) 210.5 (8.29)

G mm (in) 176.0 (6.93) 197.5 (7.78)

H mm (in) 4.2 (0.17) 4.2 (0.17)

I mm (in) 8.5 (0.33) 8.5 (0.33)

Frame size 4 – 6

A BC

EGF

Frame size 4 5 6

A mm (in) 440.0 (17.32) 540.0 (21.26) 865.0 (34.06)

B mm (in) 418.0 (16.46) 515.0 (20.28) 830.0 (32.68)

C mm (in) 423.0 (16.65) 520.0 (20.47) 840.0 (33.07)

D mm (in) 8.0 (0.315) 8.0 (0.315) 10.0 (0.394)

E mm (in) 230.0 (9.06) 270.0 (10.63) 340.0 (13.39)

F mm (in) 173.0 (6.81) 235.0 (9.25) 290.0 (11.42)

G mm (in) 110.0 (4.33) 175.0 (6.89) 200.0 (7.87)

H mm (in) 4.25 (0.167) 4.25 (0.167) 5.50 (0.217)

I mm (in) 7.5 (0.295) 7.5 (0.295) 11.0 (0.295)

Torque values for installation

Screw Frame size Torque Nm (lbs-in)

Control terminal All 0.8 (7)

Installation

SRC 311 - SmartRun™User guide 7

Screw Frame size Torque Nm (lbs-in)

Power terminal 2 – 3 1 (8.85)

4 1.2 – 1.5 (10.6 – 13.2)

5 2.5 – 4.5 (22.5 – 39.8)

6 8 (70.8)

Mounting clearance

XMinimum 200 mm (7.87 in)

YMinimum 10 mm (0.349 in)

Typical drive heat losses are 3% of operating load conditions.

NOTICE:

The operating ambient temperature of the drive must be maintained.

Installation

8 SRC 311 - SmartRun™User guide

Andere Handbücher für FLYGT SmartRun SRC 311

Inhaltsverzeichnis

Andere Xylem Controller Handbücher

Xylem

Xylem Flygt ENM 10 Betriebsanleitung

Xylem

Xylem Aquavar IPC Bedienungsanleitung

Xylem

Xylem Goulds ResiBoost RB111512 Bedienungsanleitung

Xylem

Xylem Bell & Gossett Hoffman Specialty 1140 Series Bedienungsanleitung

Xylem

Xylem LOWARA FF128DP Series Bedienungsanleitung

Xylem

Xylem Bell & Gossett Technologic PPS Bedienungsanleitung

Xylem

Xylem FLYGT SmartRun SRC 311 Bedienungsanleitung

Xylem

Xylem Hydrovar HVL 2.015 Fehlerbehebungshandbuch

Xylem

Xylem Bell & Gossett Zone Trol II Z-1 Bedienungsanleitung

Xylem

Xylem HYDROVAR HV2.1f Bedienungsanleitung

Xylem

Xylem Flygt FGC 400 Montage- und Bedienungsanleitung

Xylem

Xylem Aquavar AB2 Bedienungsanleitung

Xylem

Xylem Bell & Gossett Technologic IPC Fehlerbehebungshandbuch

Xylem

Xylem CentiPro Aquavar IPC Benutzerhandbuch

Xylem

Xylem CentriPro Aquavar SOLO Bedienungsanleitung

Xylem

Xylem CentriPro MP PLUS Bedienungsanleitung

Xylem

Xylem McDonnel & Miller 157S-RBP-MD Bedienungsanleitung

Xylem

Xylem McDonnell & Miller 42S-N Series Bedienungsanleitung

Xylem

Xylem McDonnell & Miller 150S Series Bedienungsanleitung

Xylem

Xylem CentriPro SPD Plus Bedienungsanleitung

Xylem

Xylem JABSCO 43670-0005 Handbuch

Xylem

Xylem FLOJET 01752 C Series Bedienungsanleitung

Xylem

Xylem hydrovar Bedienungsanleitung

Xylem

Xylem HYDROVAR smart Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch