Yaesu FT-8800 Betriebsanleitung

Andere Handbücher für FT-8800

2

Inhaltsverzeichnis

Andere Yaesu Transceiver Handbücher

Yaesu

Yaesu Mark-V FT-1000MP Bedienungsanleitung

Yaesu

Yaesu FT-840 Bedienungsanleitung

Yaesu

Yaesu FT-991 Bedienungsanleitung

Yaesu

Yaesu FT-227R Memorizer Bedienungsanleitung

Yaesu

Yaesu FT5Dr Bedienungsanleitung

Yaesu

Yaesu FTM-400DR Bedienungsanleitung

Yaesu

Yaesu FTM-400DR/DE Handbuch

Yaesu

Yaesu FT-950 Technisches Handbuch

Yaesu

Yaesu FT-100D Bedienungsanleitung

Yaesu

Yaesu VX-7R Bedienungsanleitung

Yaesu

Yaesu FT-450 Bedienungsanleitung

Yaesu

Yaesu FT-470 Bedienungsanleitung

Yaesu

Yaesu FT-102 Bedienungsanleitung

Yaesu

Yaesu FTM-100DR Bedienungsanleitung

Yaesu

Yaesu FT DX 3000 Bedienungsanleitung

Yaesu

Yaesu FT-80C - SERVICE Bedienungsanleitung

Yaesu

Yaesu FT-200 Bedienungsanleitung

Yaesu

Yaesu FTdx560 Bedienungsanleitung

Yaesu

Yaesu FTdx3000 Series Handbuch

Yaesu

Yaesu FT-2500M Bedienungsanleitung

Yaesu

Yaesu CT-39A Bedienungsanleitung

Yaesu

Yaesu FT-600 Bedienungsanleitung

Yaesu

Yaesu FT-625RD Bedienungsanleitung

Yaesu

Yaesu FT-857 series Handbuch

Beliebte Transceiver Handbücher anderer Marken

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung

YAESU FT-8800 PROGRAMING

Push the lower right kno to turn the radio on or off.

Make sure “MAIN” is on the desired side of the display. To change sides,

momentarily push the top right or top left dial ON THE SIDE YOU WANT

TO BE “MAIN”.

Momentarily push the V/M utton so no memory channel num er appears in

the display, to the left and a ove the displayed frequency.

Use the microphone to key in the desired frequency.

If you are setting up for a repeater, the correct offset is pro a ly displayed.

If you need to correct the offset, momentarily push the “SET” utton. The

“SET” utton is the unla eled utton in the center of all the la eled uttons.

After momentarily pushing the “SET” utton, a menu item is displayed. Go

to menu item # 33, RPT-MOD.

Push the main dial (in this case the upper left dial, if you are working with

the frequency on the left side). Rotate the main dial to the desired setting, +,

-, OFF (simplex). Push the main dial to return to the menu screen.

If a tone is required, rotate the main dial to # 41, TONE M. Push the main

dial and rotate to the type of tone desired, usually ENC. Push the main dial

once to get ack to the menu.

Rotate the dial to # 40, TONE F. Push the main dial and rotate until the

proper frequency is displayed. Push the main dial to get to the menu again.

Push and hold the SET utton.

You will hear 2 eeps and the memory channel num ers flash. Rotate the

main dial until the channel num er appears where you want the information

stored. Push the SET utton and a long eep is heard and the display will

show MEM-IN momentarily.

The memory is stored.

Pushing the V/M utton will then show the information for the selected

channel. Rotating the dial at this point the radio will go through the channels

you have in memory.

To SCAN the channels in memory, push the SCAN utton on the side you

wish to scan. You may also push and hold the UP - DOWN uttons on the

icrophone to start scanning.

If you wish to skip over a memory channel while scanning, you must have

the channel displayed. Push the "SET" utton to access the menu. Rotate

the dial to item #37. "SKPMSM". Push the main dial on the side of the

radio you are working with, and rotate to "SKIP". Push the "SET" utton

twice to get ack to the memory channels. Note that it says SKIP to the

right of the memory num er. Repeat the process to remove SKIP, except

choose "OFF" instead of SKIP.

MEMORY BANKS

The FT 8800 has 10 memory banks for wach side of the radio. To

enter a memory channel into a bank, you must first be you must first

be able to look at all the memory channels available. This is called

"ALL E ".

Push and HOLD the V/ button on the side of the radio where

" AIN" is displayed. "ALL E " should appear. Push the SET

button. Rotate the main dial until the memory channel you wish to

put into a particular bank appears. Again, push and HOLD the V/

button ALL E appears. Roate the main dial to the selected bank.

omentarily push the SET button, and that channel is now in the

desired desired bank.

Remember you may place a memory channel in as many banks as

you wish. When you select a bank, and then use the scan function,

only the memory channels in that bank will be scanned, provided you

do not have the set up to SKIP.