Yaesu FTDX-9000D Allgemeine Anweisungen

4/05/10

PEP9000

This procedure is used to update Main CPU Ver. 0518 and EDSP Ver. 11.54 flash

programming for FTDX9000 Transceivers that have already been updated to

PEP9000.

IMPORTANT: This procedure is only needed under the below conditions:

•Must have the PEP9000 logo sticker on the radio below the serial number label.

PEP9000 Logo Sticker

•Must have MAIN CUP Version 0505 or higher or EDSP Version 11.24. While holding the three

buttons [GEN]＋[50]＋[ENT] turn the radio on and read the 7 digits on the top line of the LED

display. See page (6) for more detail instructions. If the software version is not immediately

displayed, your radio has not been updated to PEP9000; you must have the radio updated. Please

contact Vertex Standard, Amateur Tech Support.

If your radio meets the above conditions you may proceed to update the Main CPU to V0518

programming and EDSP to V11.54.

We recommend installing the Flash Programming Software on a PC computer with Windows 2000,

XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW

(P0091526) and serial cable RS-232C, DB9F to DB9F straight cable.

NOTE: There are many USB adapters available; however some may not function with this software.

We recommend using the latest USB adapter driver software when available.

The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of the

FTDX9000Contest, FTDX9000D and FTDX9000MP

The update software is available from our website at http://www.yaesu.com. The CT-119

programming cable is available from your authorized Vertex Standard dealer. You may also order

by email to Vertex Standard parts department,

The software versions can be displayed on the radio

While holding the three buttons [GEN]＋[50]＋[ENT] turn the radio on. The software version will be

displayed in the VFO-A window for 5 seconds then the radio will start up in normal operation.

See below: Example EDSP V11.54 and MAIN V 0158 software version.

*If you already have EDSP V11.54 and MAIN V0158 software versions, it is not necessary to update the

FTDX9000 again.

Ver. 0518 MAIN implements improvements (also includes all previous updates):

•The CW MEMORY KEYER MESSAGE TEXT save is corrected.

•The FH-2 [<-][->]keys are made to increment the frequency at 100kHz up or down.

•CW carrier is corrected to change LSB ⇔USB when the indication is changed on VFO B.

•Correct the CW Auto Mode.

•DMU Band Scope Display Signal Peak Frequency is centered.

Ver. 11.54 EDSP implements improvements (also includes all previous updates):

•Corrected FM TX for a slight frequency offset.

*When menu settings are saved on the DMU-9000 CF card and transferred to the new version, some previous versions

may not transfer correctly. Please check your menu, update the settings, and then save the new settings to the CF card.

Install the data file to PC

*Before you install this software make sure that you delete all of the old update files AH010 and FWS002

that are saved on your computer. Do not keep any of the old files or folders on your computer. (The old

files are not compatible with the PEP9000 updated radio).

1. Down load the FTDX9000 data file [FTdx9000_PEP9000_4-05-10.zip] from the following

website:

http://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=34B0B268

F77981D7E72CF66FC1930880&DivisionID=65&isArchived=0

2. Save the FTDX9000 data file [FTdx9000_PEP9000_4-05-10.zip] to the desktop on your

computer.

EDSP:

Software version 11.XX

(This image & version is for

illustration only)

Main CPU:

Software version

05XX

(This image & version is

for illustration only)

3. Unzip and Extract the contents of [FTdx9000_PEP9000_4-05-10.zip] to the desktop of your

computer.

4. You will find the PEP9000_EDSP and PEP9000_MAIN folders on your desktop.

The programmer and software are now stored on your computer on the desktop. The files designated

in the last step above are ready to update your FTDX9000 Transceiver.

* The PEP_9000 MAIN folder with the new software writer FWS004 V2.02. We recommend not using the

earlier version software and writer.

* The PEP_9000 EDSP folder includes a new software writer EDSP V2.00; it no longer requires the four

DLL files that were needed by V1.03. We recommend you use the V2.00 writer and remove V1.03 and the

four DLL files from you PC.

MAIN Software Update

This procedure is used for uploading new Software into the FTDX9000 Amateur Transceivers using

the CT-119 program cable. If you have the 8-pin mini-DIN PGM-SW (P0091526) refer to the page 4.

*Don't forget to write down (or save to a CF Card) any personal menu settings you have changed from the

default before you start. Please see the Data Management Operation Manual for the procedure to save your

settings to a CF card.

(1) Turn off the main power switch located on the back of the FTDX9000 (or turn off the power

supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC

power cord.

(2) Connect the CT-119 cable’s DB-9F connector to the serial port COM1 in the back of your

computer. Plug the mini-DIN connector of the CT-119 into the ACC jack connector on the rear

of the transceiver. Be sure that the arrow indicator on the mini-DIN plug is down. If you use a

USB to serial adapter, you might need to change the COM-Port number.

(3) Connect the AC power cord (in the case of the FTDX9000MP connect the power supply cables).

(4) Turn on the main power switch located on the rear panel of the FTDX9000 (or on the top of the

power supply for the FTDX9000MP). [NOTE: The radio will not show a display now.]

(5) Now go to the desktop and find the FSW004 as shown below. Double-click the FSW004 icon,

displayed on the Program Screen.

ACC

Main Power SW

(6) When the program opens, confirm that the file AH010N_V0518.SFL is highlighted; if not, click

on it to highlight it.

(7) Click on [WRITE] in the program window. A green status bar should appear below the [WRITE]

button to show the progress of the download. Do not interrupt the process until it completes.

(8) When the loading process is complete, an [OK?] box will appear. Click [OK?].

(9) Turn off the main power switch. Located on the rear panel of the FTDX9000 (or on the top of the

power supply for the FTDX9000MP. Remove the CT-119 cable from the DB-9F connector of

your computer and the ACC connector on the rear of the transceiver.

(10) Turn on the main power switch located on the back of the FTDX9000 (or on the top of the power

supply for FTDX9000MP).

(11) Press and hold in the [FAST] and [LOCK] keys while turning the radio back on. This resets the

radio and locks in the new software. Turn the radio off. The updating process is now complete.

Follow the instructions below to update the EDSP.

8-pin mini-DIN PGM-SW

1. Turn the main REAR power switch OFF.

2. Connect a RS-232C straight cable to the CAT connector.

3. Open the file FSW004.

4. Insert the 8-pin mini-DIN PMG-SW connector to FTdx9000 (ACC) jack.

5. Turn on the REAR Main power switch.

6. I choose the .sfl file of the version V0518 to write in and push WRITE of the screen.

7. When complete appears, click OK. Turn the REAR power switch OFF.

8. Remove the 8-pin mini-DIN PMG-SW and the RS-232C cable.

9. Turn on REAR power switch.

10. Reset the radio to default.

NOTE: for a more detailed description see the Main CPU programming.

EDSP Software Update

This procedure is used for uploading new EDSP Software into the FTDX9000 Amateur Transceivers,

from your personal computer, using the RS-232C, DB9F to DB9F straight cable.

1. Turn off the main power switch located on the back of the FTDX9000 (or turn off the power

supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC

power cord.

2. Connect a serial RS-232C, DB9F to DB9F straight cable to the COM1 connector of your

computer and the 9-pin CAT connector on the rear of the transceiver. If you use a USB to serial

adapter, you might need to change the COM-Port number.

3. Reconnect the power cable and turn ON the main power switch located on the back of the

FTDX9000 (or turn ON the power supply for FTDX9000MP).

4. While holding the [DNR]＋[CONT] for the Dor [NR]＋[CONT] buttons for the Contest and

MP, press the front main power switch to turn the radio on. You will see [dSP Prg]on the radio

display.

5. On your computer desk top open PEP9000_EDSP folder and find the EDSP-9000 icon as shown

below. Double-click the EDSP-9000 icon, displayed on the Program Screen.

6. Click the Update button. You will see AH010H_V1154 out file displayed. If you do not see

AH010H_V1154 (as in the screen below), then open the “Look in:” window and go to the desktop

and find PEP9000_EDSP. Open the folder and AH010H_V1154 will be displayed in the

CAT

Main Power SW

window. Click AH010H_V1154 out file to highlight it. Then click the Open button and wait until

the program is loaded, and 100% is indicated on the bar graph, [completion!!!] will be displayed.

7. Turn the front Power Switch and the Main Power Switch in the back OFF (or turn off the power

supply for FTDX9000MP and wait a minute, until the capacitors discharge) and remove the AC

power cord. This resets the radio and locks in the new software. Remove the DB9F to DB9F

cable. The updating process is now complete

It is important to reset the FTDX9000. Plug the radio back in. Press and hold in the [FAST] and

[LOCK] keys; while holding them in, turn the radio back on (this resets the radio and locks in

the new software).

NOTE: We recommend trying the new factory default settings rather than transferring your old ones,

because of the changes in the EDSP and the Main CPU, you may wish to make new settings.

We hope this new software will increase your enjoyment of your FTDX9000. Thank you for choosing

Yaesu radios. If you have any problems or questions please contact Vertex Standard, Amateur Tech

Support. amateurtech@vxstdusa.com

Best regards,

Mikio Maruya, WA6F

Executive Vice President

Engineering & Customer Service

Vertex Standard USA, Inc.

Vertex Standard USA, Inc. | 10900 Walker St. | Cypress, CA 90630 | 714.827-7600 | FAX: 714.827-8100

www.vertexstandard.com

NOTE: If you receive a “communications

error” message on your screen you should

check the COM port number and speed under

Device Manager. The writing speed 38.4kbps

is fixed in the download algorithm of the EDSP

board so you may need to set the port speed

close to 38.4kbps. Click on the COM Select

box arrow and choose a different COM port

from the drop down menu in the EDSP9000

writer.

Andere Handbücher für FTDX-9000D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yaesu Transceiver Handbücher

Yaesu

Yaesu FT-25E Bedienungsanleitung

Yaesu

Yaesu FT-747GX Bedienungsanleitung

Yaesu

Yaesu FTM-400DR Gebrauchs- und Pflegehandbuch

Yaesu

Yaesu FT-991A Bedienungsanleitung

Yaesu

Yaesu FT3DR Bedienungsanleitung

Yaesu

Yaesu VX-8DR Bedienungsanleitung

Yaesu

Yaesu FT-250R Bedienungsanleitung

Yaesu

Yaesu FT-817ND Bedienungsanleitung

Yaesu

Yaesu FTM-6000R Bedienungsanleitung

Yaesu

Yaesu FT DX 560 Bedienungsanleitung

Yaesu

Yaesu FT-25R Bedienungsanleitung

Yaesu

Yaesu VX-8DE Bedienungsanleitung

Yaesu

Yaesu FT-23R MKII Bedienungsanleitung

Yaesu

Yaesu FT-480R Bedienungsanleitung

Yaesu

Yaesu FT-60 HT Bedienungsanleitung

Yaesu

Yaesu FTA-250L Bedienungsanleitung

Yaesu

Yaesu FT-2500M Handbuch

Yaesu

Yaesu FV-901DM Bedienungsanleitung

Yaesu

Yaesu FT-690RII Bedienungsanleitung

Yaesu

Yaesu VX-2R Bedienungsanleitung

Yaesu

Yaesu FT DX 1200 Bedienungsanleitung

Yaesu

Yaesu Mark-V FT-1000MP Bedienungsanleitung

Yaesu

Yaesu FT-2900R Handbuch

Yaesu

Yaesu FT-203R Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung

Standard Horizon

Standard Horizon HX320E Bedienungsanleitung