Yaesu FTM-100DE Bedienungsanleitung

Thank you for purchasing this Yaesu product.

This instruction manual explains information related to the “GM Function”.

For information on basic operation of the transceiver, please refer to the enclosed

FTM-100DR/DE operating manual.

Company names and products in this manual are trademarks or registered

trademarks of the respective company.

FTM-100DR/DE

Instruction Manual (GM Edition)

C4FM/FM 144/430 MHz

DUAL BAND TRANSCEIVER

Contents

What is the GM Function?.........................................................3

Displaying all the stations using the GM function.................4

Deleting stations from the list...............................................4

Inputting Characters ..................................................................5

Switching the character type...........................................5

Deleting all input characters ...........................................5

Moving the cursor to the left ...........................................5

Moving the cursor to the right .........................................5

Deleting the most recently input character .....................5

Completing input.............................................................5

Checking Received Messages or Images .................................6

Downloading messages or images ......................................6

Viewing the message or image list.......................................6

Deleting messages or images..............................................8

Deleting data from the content display screen................8

Deleting data from the list...............................................8

Sending MESSAGE (Massages) or Images (PICT) ..................9

Sending massages or images..............................................9

Creating and sending a new message ...........................9

Using routine messages ...............................................10

Replying to the sender of the checked message

or image data .....................................................................12

Forwarding the checked message or image data ..............13

GM Setup Menu ......................................................................14

What is the GM Function?

The GM (Group Monitor) function automatically monitors for any other stations with the

GM function in operation on the same frequency, or stations operating in DN mode,

within communication range. The GM function then displays the acquired information,

including the direction and distance, on the screen for each detected call sign.

In addition to notifying you of the GM members within your communication range, the

GM function also displays the relative positions of all the members on the transceiver

screen.

Tips

• The GM function does not work while in the analog mode. When the GM function is activated, the

operating band automatically switches to DN mode.

• When sending an image with the GM function in operation, the operating band automatically

switches to FR mode (Fast Rate (high-speed data communication) mode). Upon completion of the

data transmission, the mode automatically reverts to the original V/D mode (simultaneous voice/

data communication mode).

What is the GM Function?

Displaying all the stations using the GM function

1Press .

The GM function activates and displays up to 24

stations using the GM mode on the same frequency,

or stations operating in DN mode, within the

communication range.

Tips  •Displays for stations within your communication

range.

 •Displays for stations outside your communication

range.

Deleting stations from the list

Delete the stations displayed on the list.

1Press .

2Rotate the DIAL to select the station you want to

delete, then press .

Deletes the selected station from the list.

Tip Pressing deletes all stations displayed on the list.

Inputting Characters

You can input letters and characters to create messages by following the procedure

below.

Switching the character type

Press ([A/a] appears on the upper side). Pressing each time changes the

character type in the following order.

Uppercaseletters→symbols→lowercaseletters→numbers

Deleting all input characters

Press ([CLR] appears on the upper side).

Moving the cursor to the left

Press ([←]appearsontheupperside).

Moving the cursor to the right

Press ([→]appearsontheupperside).

Deleting the most recently input character

Press ([×] appears on the upper side).

Completing input

Press or .

Checking Received Messages or Images

Check messages or images on the LOG list using the GM function.

Downloading messages or images

When there is a message or image sent in digital mode from a station on the same

operating frequency, the content of the message or image is displayed for a certain

period of time on the transceiver screen. Message data can be downloaded to the

memory of the transceiver and image data can be downloaded to the microSD memory

card inserted into the transceiver.

When receiving a message When receiving an image

Tips

• While receiving an image, sender’s call sign and “>>>” appear to indicate the reception progress of

the data.

• If the message cannot be downloaded successfully due to unsupported file format or other reasons,

“Not Completed” appears.

• If the image data cannot be downloaded to the microSD memory card successfully due to

insufficient memory space, “Insufficient SD's Memory” appears.

Viewing the message or image list

You can display the list of transmitted and received data. You can also select the data

you want to check from the list.

1Press and hold for over one second.

Displays the “DG-ID SETUP” screen.

2Press , ( appears on the left side)

Displays the “LOG SELECT” screen.

Checking Received Messages or Images

3Rotate the DIAL to select [GM MESSAGE] or

[GM PICT], then press .

When [GM MESSAGE] is selected, the “GM

MESSAGE” screen appears.

When [GM PICT] is selected, the “GM PICT”

screen appears and the images and time stamps are

listed.

Press ( appears on the upper side) to

switch the display to image size display. Pressing

each time switches the display.

Tip displayed on the left side of the icon indicates that

the image was successfully received.

Tip Icons on the left side of the LOG list indicate the following.

NEW Creating and sending a new message

Message received (unread)

Message received (read)

Message sent

Message failed to send

Image received (unread)

Image received (read)

Image sent

Image failed to send

Tips  •Thedatamostrecentlyreceivedisonthetopofthelist.

 •Press ( appears on the upper side) to jump to the bottom of the list.

 •Whentherearemanyfiles,itmaytakeawhiletojumptothebottomofthelist.Press[PTT]

to cancel the operation halfway.

 •Press ( appears on the upper side) to jump to the top of the list.

4Rotate the DIAL to select the data you want to check, then press .

Displays the selected data.

5Press twice.

Returns the screen to the previously viewed screen.

Checking Received Messages or Images

Deleting messages or images

You can delete unnecessary data from the memory channels or the microSD memory

card.

Deleting data from the content display screen

1Display the data you want to delete.

2Press ( appears on the upper side).

Displays the confirmation screen.

3Rotate the DIAL to select [OK?], then press .

Starts the deletion process.

After completing deletion, the display returns to the

data list screen.

Rows move up by one.

Tip To cancel deletion, select [Cancel], then press .

Deleting data from the list

1From the data list, select the data you want to delete by rotating the DIAL.

2Press ( appears on the upper side).

Displays the confirmation screen.

3Rotate the DIAL to select [OK?], then press .

Starts the deletion process.

After completing deletion, the display returns to the

data list screen.

Rows move up by one.

Tip To cancel deletion, select [Cancel], then press .

Sending MESSAGE (Massages) or Images (PICT)

Send messages or images using the GM function.

There are the following three ways for sending messages or images.

(1) Creating and sending a new message

(2) Replying to the sender of the checked message or image data

(3) Forwarding the checked message or image data

Sending massages or images

You can send messages or images from the transceiver. Sent data can be viewed by all

stations operating in digital mode on the same frequency.

There are the following three ways for sending messages or images.

(1) Creating and sending a new message

(2) Replying to the sender of the downloaded message or image data

(3) Forwarding the downloaded message or image data

Creating and sending a new message

Create a new message and send.

1Press and hold for over one second.

Displays the “DG-ID SETUP” screen.

2Press , ( appears on the left side)

Displays the “LOG SELECT” screen.

3Rotate the DIAL to select [GM MESSAGE], then

press .

Displays the “GM MESSAGE” screen.

4Rotate the DIAL to select [NEW], then press .

5Press ( appears on the upper side).

Displays the message entry screen.

Sending MESSAGE (Massages) or Images (PICT)

6See “Inputting Characters” on page 5 to input a message.

7Press .

Displays the entire message.

Tips  •Tosavethecreatedmessage,press (

appears on the upper side). For details, see

“Registering routine messages” on page 11.

 •Tocontinuemessageentry,press (

appears on the upper side).

8Press ( appears on the upper side).

Sends the message.

Tip To cancel transmission, press .

When message transmission completes, “Completed” appears and then the

screen returns to the message list screen. The tag of the transmitted message is

added to the top of the list.

Using routine messages

The following 19 routine messages are stored on the transceiver at the time of factory

shipment for quick input.

QRM Good night

QRP Send messages

QRT Send pictures

QRX on my way

QRZ wait for you

QSY Pick me up

Good morning Thank you

Good job OK

Good day urgent

Good evening

1Follow steps 1 to 4 in “Creating and sending a new message” on page 9 to

display the message details screen.

2Press ( appears on the upper side).

Displays the routine messages at the top of the

screen.

Tip For “01” to “10”, you can register a message comprising

up to 16 letters. See “Registering routine messages” on

page 11.

Andere Handbücher für FTM-100DE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yaesu Transceiver Handbücher

Yaesu

Yaesu FT-8800R Bedienungsanleitung

Yaesu

Yaesu FT1DR Bedienungsanleitung

Yaesu

Yaesu 857D Bedienungsanleitung

Yaesu

Yaesu FT-77 Bedienungsanleitung

Yaesu

Yaesu VX-7R Bedienungsanleitung

Yaesu

Yaesu FT-101B Bedienungsanleitung

Yaesu

Yaesu FTdx560 Bedienungsanleitung

Yaesu

Yaesu FTA-750 Spirit Bedienungsanleitung

Yaesu

Yaesu FT-5100 Bedienungsanleitung

Yaesu

Yaesu FT-77 Bedienungsanleitung

Yaesu

Yaesu FTM-200DR Bedienungsanleitung

Yaesu

Yaesu FT2DR Bedienungsanleitung

Yaesu

Yaesu FT-415 Handbuch

Yaesu

Yaesu FTDX-9000 Contest Bedienungsanleitung

Yaesu

Yaesu FTC-703A Bedienungsanleitung

Yaesu

Yaesu FTM-100DR Bedienungsanleitung

Yaesu

Yaesu FT-991 Bedienungsanleitung

Yaesu

Yaesu 20663X20 Bedienungsanleitung

Yaesu

Yaesu FT-2000 - MENU MODE LIST Handbuch

Yaesu

Yaesu VX-5R Bedienungsanleitung

Yaesu

Yaesu GX1280S Bedienungsanleitung

Yaesu

Yaesu FT-301 Bedienungsanleitung

Yaesu

Yaesu FT-857D Bedienungsanleitung

Yaesu

Yaesu FT-530 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung