Yaesu FTM-200DR Bedienungsanleitung

C4FM/FM 144/430MHz

DUAL BAND DIGITAL TRANSCEIVER

FTM-200DR

FTM-200DE

Instruction Manual

(GM Edition)

Contents

What is the GM Function? ............................................................................................. 2

GM Operation.................................................................................................................. 3

Display the APL (Automatic Position Locating) screen.............................................. 4

Confirm the location of a Group Member station in real time.................................... 5

Display the position of the member station on the compass screen............................. 5

Registering the Location Information of a Partner Station ............................................ 6

Checking Received Messages and Images.................................................................. 7

Sending massages or images....................................................................................... 9

Creating and sending a new message.......................................................................... 9

Using Standard Messages ...................................................................................... 10

Registering a standard message............................................................................. 11

Replying to the Sender of the Checked Message or Image Data............................... 12

Forwarding the Checked Message or Image Data ..................................................... 12

Sending Your Snapshot Images.................................................................................. 13

GM Set Mode List ......................................................................................................... 14

GM Set Mode Function List ......................................................................................... 14

What is the GM Function?

The GM (Group Monitor) function automatically monitors on the same frequency for

any other stations with the GM function in operation, or stations operating in DN mode,

within communication range. The GM function then displays the acquired direction and

distance information for each detected call sign on the screen.

If the DG-ID number is other than “00”, the GM function will check for partner stations

set to the same DG-ID number, with the GM function turned ON, that are within commu-

nication range.

In addition to knowing who is in the service area, the APL (Automatic Position Locat ing)

screen indicates the positions of the group members, centered on your own station (up

to four are simultaneously displayed). The direction and progress of each station is dis-

played, and you can check each other's position, distance, and moving direction.

You can also use GM functions to send data such as messages and images with your

friends.

• When the GM function is activated, the operating band is automatically switched to the A

band, and the communication mode is switched to the C4FM digital (DN) mode.

• To use the GM function, all of the members must operate on the same frequency.

• Note that when the receive DG-ID number of your transceiver is set to a DG-ID number

other than “00”, received signals that do not have the same DG-ID number may not be

heard.

Insert a commercially available micro-SD card into this unit to send and receive messages

and images.

Usable microSD Memory Cards

This transceiver only supports the following capacity of microSD and microSDHD memory

cards.

•2GB•4GB•8GB•16GB•32GB

Not all microSD and microSDHC cards sold commercially are guaranteed to work with this

product. In addition, microSDXC memory cards are not supported.

GM Operation

1. Tune to the frequency used by the group that you would like to communicate with.

• If you only want to check your group location information, press and hold the [GM]

key and set the send and receive DG-ID numbers to the same numbers except “00”

at all the partner stations.

• The frequency cannot be changed while the GM function is operating.

2. Press the [GM] key.

• The callsign and signal strength of stations (up to 24) operating in the DN mode

and those with their GM function in operation, that are within communications

range, will be displayed.

• Stations within the sphere of communications callsigns are displayed in white and

are displayed in descending order of signal strength.

• Each time you press the [BAND grp] key, turn ON/OFF the functions displayed in

order of signal strength (the display of signal strength is also turned OFF).

• Stations outside the sphere of communications callsigns are displayed in gray.

• You can communicate in DN mode of C4FM digital by pressing the PTT switch.

JQ1YBF-0AB

JH1YPC-FGH

JA2YSO-789

JA1YOE-123

JA7YWC-022

JA1ZRL-CDE

Selected member

Signal strength

Out of range

In range

Display the APL (Automatic Position Locating) screen

The positions of up to four group stations are displayed on the APL (Automatic Position

Locating) screen, centered on your own station. The direction and progress of each sta-

tion is displayed, and you can check each other's position, distance, and moving direc-

tion.

JQ1YBF

JH1YPC

JA1YOE

JA7YWC

Displayed members (max 4 stations)

Callsign (first 6 characters)

DG-ID number

Member

(Arrow indicates the direction of progress)

Own station

(Arrow indicates the direction of progress)

1. Press the [F menu] key, then press the DIAL knob

while the GM function is active:

• The last four stations received by the GM function

are displayed on the APL screen. The displayed sta-

tions are listed on the left side of the screen with the

first six characters of the callsign and the direction

from your own station.

• The direction of members will be displayed on the

compass screen, centered on your own station. The

traveling direction of your own and member stations

is indicated on the compass screen.

• The scale of the compass screen is automatically set

according to the distance of the selected member

station when the APL screen is displayed. Rotate the

DIAL knob to change the scale.

• The maximum distance at which a member's posi-

tion can be displayed on the compass screen is a

radius of 1,000 mi (or 1,000 km).

JQ1YBF-0AB

JH1YPC-FGH

JA2YSO-789

JA1YOE-123

JA7YWC-022

JA1ZRL-CDE

JQ1YBF

JH1YPC

JA1YOE

JA7YWC

zDisable the APL screen display

1. Press the [SQL back] key.

Return to the normal GM screen.

Confirm the location of a Group Member station in real time

The position of the selected member can be confirmed in real time on the compass

screen.

The member's current position may be registered as the navigation destination.

Display the position of the member station on the compass screen

1. Press the [GM] key.

2. Rotate the DIAL knob to select the station for which

you want to display location information.

JQ1YBF-0AB

JH1YPC-FGH

JA2YSO-789

JA1YOE-123

JA7YWC-022

JA1ZRL-CDE

3. Press the DIAL knob or [DISP] key.

The call sign and direction, distance, and heading of the selected partner station are

displayed.

JA1YOE-0AB

Callsign of other station

Direction of other station

HUP: Heading up

NUP: North UP

Distance to other station

Direction of your station

zSwitch the compass screen display method

Press and hold the [F menu] key [DISPLAY] [6 COMPASS]. Press the DIAL

knob then rotate the DIAL knob to select the screen display method (direction to-

ward the top of the screen) from “HEADING UP” or “NORTH UP”. The default setting

is “HEADING UP”.

HEADING UP: The compass circle indicates the direction ( , , and ) you are

heading.

The arrow indicates the direction toward your partner station.

NORTH UP: Always displays the north ( ) on the top. The arrow indicates the di-

rection you are heading.

zDisable the Compass screen display

1. Press the [SQL back] or [DISP] key.

• You cannot update the location information of the partner stations outside of

communication range.

• If your station or your partner stations do not set the location information manually or

capture it from the GPS satellite signals, the compass display is not available.

• GPS location information may have an error of several hundred meters depending on the

surrounding environment and so on.

• This function is a simple function using GPS satellite data. Use this as a guide for the

position of your own station or partner station.

Registering the Location Information of a Partner Station

You can register the current position of the selected member, and then navigate toward

that station.

1. Press the [GM] key.

2. Rotate the DIAL knob to select the station for which

you want to registering location information.

3. Press the DIAL knob or [DISP] key.

4. Press the [F menu], then rotate the DIAL knob to

select [MEM], then press the DIAL knob.

[«], [L1] and [L2] will start blinking.

5. Rotate the DIAL knob to select the [«], [L1] or [L2],

then press the DIAL knob.

6. Press the [BACK] key.

• The Callsign and location information of your partner

station is registered, and the Navigation starts.

• To cancel the registration, rotate the DIAL knob to

select [MEM], then press the DIAL knob.

• The registered location information can be recalled

later to allow navigation to that point.

JA1YOE-0AB

Checking Received Messages and Images

Use the GM function to check the messages and images on the LOG list.

When using a GM function, a beep sounds when a new message or image is received, and

the “LOG MSG” or “LOG PICT” list screen (see step 3 below) appears automatically.

1. Press the [GM] key.

2. Press the [F menu]key, then rotate the DIAL knob to

select [LOG], then press the DIAL knob.

JQ1YBF-0AB

JH1YPC-FGH

JA2YSO-789

JA1YOE-123

JA7YWC-022

JA1ZRL-CDE

3. Rotate the DIAL knob to select [MESSAGE] or [PICT].

VOICE: Audio recorded (Only playback of record-

ed content is possible.)

MESSAGE: Text Message

PICT: Image

4. Press the DIAL knob.

LOG

VOICE

MESSAGE

PICT

Select “MESSAGE” or “PICT” to display the LOG MSG

list or LOG PICT list.

The icons on the left side of the LOG list indicate the

following:

Message received (unread)

Message received (read)

Message sent

Message failed to send

Image received (unread)

Image received (read)

Image sent

Image failed to send

Image taken with the camera built in the optional

microphone

NEW

JA6YPC- 7 12:34

JA1YOE-13 08:56

JQ1YBF- 9 06:17

JQ1YBG-14 05/05

JA1ZRL- 9 04/24

LOG MSG

5. Rotate the DIAL knob to select to the message or image to be displayed, then press

the DIAL knob.

• The selected message or image will be displayed.

• Press the [F menu] key, then rotate the DIAL knob to select [FWD], then press the

DIAL knob to forward the checked message or image data. Refer to “Forwarding

the Checked Message or Image Data (page 12).

• Press the [F menu] key, then rotate the DIAL knob to select [REPLY], then press

the DIAL knob to reply to the sender of the downloaded message or image data.

Refer to “Replying to the Sender of the Checked Message or Image Data” (page

12).

• Press the [F menu] key, then rotate the DIAL knob to select [DEL], then press the

DIAL knob to display “DELETE?”. Rotate the DIAL knob to select [OK], then press

the DIAL knob to delete the information.

6. Press the [SQL back] key, then press the [DISP] key.

Returns to the previously viewed screen.

Sending massages or images

There are 4 ways to send messages or images using the GM function:

(1) Creating and sending a new message

(2) Replying to the sender of the checked message or image data

(3) Forwarding the checked message or image data

(4) Sending your snapshot images

Creating and sending a new message

Create and send a new message:

1. Press the [GM] key.

2. Press the [F menu]key, then rotate the DIAL knob

to select [LOG], then press the DIAL knob.

JQ1YBF-0AB

JH1YPC-FGH

JA2YSO-789

JA1YOE-123

JA7YWC-022

JA1ZRL-CDE

3. Rotate the DIAL knob to select [MESSAGE], then

press the DIAL knob.

Displays the LOG list.

NEW

JA6YPC- 7 12:34

JA1YOE-13 08:56

JQ1YBF- 9 06:17

JQ1YBG-14 05/05

JA1ZRL- 9 04/24

LOG MSG

4. Rotate the DIAL knob to select [NEW], then press

the DIAL knob.

NEW

JA6YPC- 7 12:34

JA1YOE-13 08:56

JQ1YBF- 9 06:17

JQ1YBG-14 05/05

JA1ZRL- 9 04/24

LOG MSG

5. Press the [F menu]key, then rotate the DIAL knob

to select [EDIT], then press the DIAL knob.

Displays the message entry screen.

||||||||||||||||||||

NEW

Andere Handbücher für FTM-200DR

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yaesu Transceiver Handbücher

Yaesu

Yaesu FT-891 Bedienungsanleitung

Yaesu

Yaesu FT-891 Gebrauchs- und Pflegehandbuch

Yaesu

Yaesu FT-690RII Bedienungsanleitung

Yaesu

Yaesu FT-2000 - MENU MODE LIST Bedienungsanleitung

Yaesu

Yaesu FT-8500/mh-39 Bedienungsanleitung

Yaesu

Yaesu FTM-300DR Bedienungsanleitung

Yaesu

Yaesu 600 Bedienungsanleitung

Yaesu

Yaesu FTDX-9000D Allgemeine Anweisungen

Yaesu

Yaesu FT-77 Bedienungsanleitung

Yaesu

Yaesu FT-710 Bedienungsanleitung

Yaesu

Yaesu Mark-V FT-1000MP Bedienungsanleitung

Yaesu

Yaesu FT-250R Bedienungsanleitung

Yaesu

Yaesu FT-840 Bedienungsanleitung

Yaesu

Yaesu FTDX5000D HF - PRODUCT REVIEW 12-2010 Bedienungsanleitung

Yaesu

Yaesu FT-857 series Handbuch

Yaesu

Yaesu FT-2000 - MENU MODE LIST Bedienungsanleitung

Yaesu

Yaesu FT-410 Bedienungsanleitung

Yaesu

Yaesu FT-60R/E Handbuch

Yaesu

Yaesu FT-101ZD Bedienungsanleitung

Yaesu

Yaesu FTM-100DE Bedienungsanleitung

Yaesu

Yaesu FT+850 Bedienungsanleitung

Yaesu

Yaesu FT1DR Handbuch

Yaesu

Yaesu FT-50R Handbuch

Yaesu

Yaesu FT-897 Handbuch

Beliebte Transceiver Handbücher anderer Marken

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung

Uniden

Uniden UH820 Series Bedienungsanleitung