Yamaha YZ 2019 Series Anwendungshandbuch

B29-28199-14LIT-11626-32-17

Read this manual carefully before operating this vehicle.

YZ250FXK

OWNER’S SERVICE MANUAL

YZ250FX

2019

PRINTED IN JAPAN

2018.04-0.3×1 !

(E)

PRINTED ON RECYCLED PAPER

2019

YZ250FXK

B29-28199-14_13mm.indd 1-3 2018/03/29 17:50:43

For your best ownership experience, think Genuine Yamaha!

Genuine Yamaha Parts – Genuine Yamaha replacement parts are the exact same parts as the ones

originally equipped on your vehicle, providing you with the performance and durability you have come to

expect. Why settle for aftermarket parts that may not provide full confidence and satisfaction?

Genuine Yamaha Accessories – Yamaha only offers accessories that meet our high standards for quality

and performance. Buy with confidence, knowing your Genuine Yamaha Accessories will fit right and

perform right – right out of the box.

Yamalube – Take care of your Yamaha with legendary Yamalube oils, lubricants, and care products.

They're formulated and approved by the toughest judges we know: the Yamaha engineering teams that

know your Yamaha from the inside out.

Genuine Yamaha Service Manuals – Get the same factory manual for your vehicle that the technicians

at your authorized Yamaha dealer use. Service manuals are available through your Yamaha dealer or you

can order them directly through yamahapubs.com.

Genuine Yamaha products are available only from your Yamaha dealer.

Find out more at yamaha-motor.com

postscript3-本文レイアウト準拠-.fm Page 1 Monday, May 23, 2011 1:39 PM

Operating, servicing and

maintaining a passenger vehicle or off-road vehicle can

expose you to chemicals including engine exhaust,

carbon monoxide, phthalates, and lead, which are

known to the State of California to cause cancer and

birth defects or other reproductive harm. To minimize

exposure, avoid breathing exhaust, do not idle the

engine except as necessary, service your vehicle in a

well-ventilated area and wear gloves or wash your

hands frequently when servicing your vehicle. For more

information go to

www.P65Warnings.ca.gov/passenger-vehicle

Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.

B29-28199-14_13mm.indd 4-6 2018/03/29 17:50:43

EAM20080

YZ250FXK

OWNER’S SERVICE MANUAL

1st Edition, March 2018

Any reprinting or unauthorized use

without the written permission of

Yamaha Motor Corporation, U.S.A

is expressly prohibited.

Printed in Japan.

P/N. LIT-11626-32-17

EAM20081

INTRODUCTION

Congratulations on your purchase of a Yamaha YZ series. This model is the culmination of Yamaha’s

vast experience in the production of pacesetting racing machines. It represents the highest grade of

craftsmanship and reliability that have made Yamaha a leader.

This manual explains operation, inspection, basic maintenance and tuning of your machine. If you have

any questions about this manual or your machine, please contact your Yamaha dealer.

TIP

•Yamaha continually seeks advancements in product design and quality. Therefore, while this manual

contains the most current product information available at the time of printing, there may be minor dis-

crepancies between your machine and this manual. If you have any questions concerning this man-

ual, please consult your Yamaha dealer.

•This manual is intended for those who have basic knowledge and skill concerning the servicing of

Yamaha motorcycles (e.g., Yamaha dealers, service engineers, etc.). Those who have little knowl-

edge and skill concerning servicing are requested not to undertake inspection, adjustment, disassem-

bly, or reassembly only by reference to this manual. It may lead to servicing trouble and mechanical

damage.

WARNING

EWA20270

PLEASE READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE OPERATING THIS

MACHINE. DO NOT ATTEMPT TO OPERATE THIS MACHINE UNTIL YOU HAVE ATTAINED A

SATISFACTORY KNOWLEDGE OF ITS CONTROLS AND OPERATING FEATURES AND UNTIL

YOU HAVE BEEN TRAINED IN SAFE AND PROPER RIDING TECHNIQUES. REGULAR INSPEC-

TIONS AND CAREFUL MAINTENANCE, ALONG WITH GOOD RIDING SKILLS, WILL ENSURE

THAT YOU SAFETY ENJOY THE CAPABILITIES AND THE RELIABILITY OF THIS MACHINE.

EAM30001

IMPORTANT MANUAL INFORMATION

Particularly important information is distinguished in this manual by the following notations.

This is the safety alert symbol. It is used to alert you to potential per-

sonal injury hazards. Obey all safety messages that follow this symbol

to avoid possible injury or death.

A WARNING indicates a hazardous situation which, if not avoided, could

result in death or serious injury.

A NOTICE indicates special precautions that must be taken to avoid

damage to the vehicle or other property.

A TIP provides key information to make procedures easier or clearer.

WARNING

NOTICE

TIP

EAM20092

SAFETY INFORMATION

THIS MACHINE IS DESIGNED STRICTLY FOR COMPETITION USE, ONLY ON A CLOSED

COURSE. It is illegal for this machine to be operated on any public street, road, or highway. Off-road

use on public lands may also be illegal. Please check local regulations before riding.

•THIS MACHINE IS TO BE OPERATED BY AN EXPERIENCED RIDER ONLY.

Do not attempt to operate this machine at maximum power until you are totally familiar with its char-

acteristics.

•THIS MACHINE IS DESIGNED TO BE RIDDEN BY THE OPERATOR ONLY.

Do not carry passengers on this machine.

•ALWAYS WEAR PROTECTIVE APPAREL.

When operating this machine, always wear an approved helmet with goggles or a face shield. Also

wear heavy boots, gloves, and protective clothing. Always wear proper fitting clothing that will not be

caught in any of the moving parts or controls of the machine.

•ALWAYS MAINTAIN YOUR MACHINE IN PROPER WORKING ORDER.

For safety and reliability, the machine must be properly maintained. Always perform the pre-operation

checks indicated in this manual.

Correcting a mechanical problem before you ride may prevent an accident.

•GASOLINE IS HIGHLY FLAMMABLE.

Always turn off the engine while refueling. Take care to not spill any gasoline on the engine or exhaust

system. Never refuel in the vicinity of an open flame, or while smoking.

•GASOLINE CAN CAUSE INJURY.

If you should swallow some gasoline, inhale excess gasoline vapors, or allow any gasoline to get into

your eyes, contact a doctor immediately. If any gasoline spills onto your skin or clothing, immediately

wash skin areas with soap and water, and change your clothes.

•ONLY OPERATE THE MACHINE IN AN AREA WITH ADEQUATE VENTILATION.

Never start the engine or let it run for any length of time in an enclosed area. Exhaust fumes are poi-

sonous. These fumes contain carbon monoxide, which by itself is odorless and colorless. Carbon

monoxide is a dangerous gas which can cause unconsciousness or can be lethal.

•PARK THE MACHINE CAREFULLY; TURN OFF THE ENGINE.

Always turn off the engine if you are going to leave the machine. Do not park the machine on a slope

or soft ground as it may fall over.

•THE ENGINE, EXHAUST PIPE AND MUFFLER WILL BE VERY HOT AFTER THE ENGINE HAS

BEEN RUN.

Be careful not to touch them or to allow any clothing item to contact them during inspection or repair.

•PROPERLY SECURE THE MACHINE BEFORE TRANSPORTING IT.

For safety, drain the gasoline from the fuel tank before transporting the vehicle.

EAM20162

YAMAHA MOTOR CORPORATION, U.S.A. YZ MOTORCYCLE LIMITED

WARRANTY

EAM20082

HOW TO USE THIS MANUAL

In this manual, descriptions of installation, removal, disassembly, assembly, check, and adjustment

procedures are laid out with the individual steps in sequential order.

•The manual is divided into chapters and each chapter is divided into sections. The current section title

“1” is shown at the top of each page.

•Sub-section titles “2” appear in smaller print than the section title.

•To help identify parts and clarify procedure steps, there are exploded diagrams “3” at the start of each

removal and disassembly section.

•Numbers “4” are given in the order of the jobs in the exploded diagram. A number indicates a removal

or a disassembly step.

•Symbols “5” indicate parts to be lubricated or replaced.

Refer to “SYMBOLS”.

•A job instruction chart “6” accompanies the exploded diagram, providing the order of jobs, the names

of parts, the notes in jobs, etc. This step explains removal and disassembly procedure only. For in-

stallation and assembly procedure, reverse the steps.

•Jobs “7” requiring more information (such as special tools and technical data) are described sequen-

tially.

EASB29B238

CLUTCH

5-39

CLUTCH

Removing the clutch

skrameRyt’QemantraPredrO

Engine oil

Drain.

Refer to “CHANGING THE ENGINE OIL” on

page 3-15.

.1-5egapno”LAVOMERENIGNE“otrefeRladepekarB

.tcennocsiD1elbachctul

1revochctulC2

1teksaG3

5gnirpshctulC4

1etalperusserP5

11dorhsuP6

1pilcriC7

1rehsaW8

1gniraeB9

1llaB01

2dorhsuP11

41etalpnoitcirF21

8etalphctulC31

New

(5)

(6)

789610

19 20

13 LT

10 N・m (1.0 kgf・m, 7.4 lb・ft)

75 N・m (7.5 kgf・m, 55 lb・ft)

CLUTCH

5-42

EASB29B239

REMOVING THE CLUTCH

1. Remove:

• Clutch boss nut “1”

• Lock washer “2”

• Clutch boss “3”

TIP

• Straighten the lock washer tab.

• While holding the clutch boss with the clutch

holder “4”, loosen the clutch boss nut.

EASB29B240

CHECKING THE FRICTION PLATES

1. Check:

• Friction plate

Damage/wear Replace the friction plates

as a set.

2. Measure:

• Friction plate thickness

Out of specification Replace the friction

plates as a set.

TIP

Measure it at four points on the friction plate.

EASB29B241

CHECKING THE CLUTCH PLATES

1. Check:

• Clutch plate

Damage Replace the clutch plates as a

set.

2. Measure:

• Clutch plate warpage

(with a surface plate and thickness gauge

“1”)

Out of specification Replace the clutch

plates as a set.

EASB29B242

CHECKING THE CLUTCH SPRINGS

1. Check:

• Clutch spring

Damage Replace the clutch springs as a

set.

2. Measure:

• Clutch spring free length

Out of specification Replace the clutch

springs as a set.

Universal clutch holder

90890-04086

Universal clutch holder

YM-91042

Friction plate 1 thickness

2.90–3.10 mm (0.114–0.122 in)

Wear limit

2.85 mm (0.112 in)

Friction plate 2 thickness

2.90–3.10 mm (0.114–0.122 in)

Wear limit

2.85 mm (0.112 in)

Warpage limit

0.10 mm (0.004 in)

Clutch spring free length

47.80 mm (1.88 in)

Limit

45.41 mm (1.79 in)

EAM20083

SYMBOLS

The following symbols are used in this manual for easier understanding.

TIP

The following symbols are not relevant to every vehicle.

SYMBOL DEFINITION SYMBOL DEFINITION

Serviceable with engine mounted Gear oil

Filling fluid Molybdenum disulfide oil

Lubricant Brake fluid

Special tool Wheel bearing grease

Tightening torque Lithium-soap-based grease

Wear limit, clearance Molybdenum disulfide grease

Engine speed Silicone grease

Electrical data Apply locking agent (LOCTITE®).

Engine oil Replace the part with a new one.

New

GENERAL INFORMATION 1

SPECIFICATIONS 2

PERIODIC CHECKS AND

ADJUSTMENTS 3

CHASSIS 4

ENGINE 5

COOLING SYSTEM 6

FUEL SYSTEM 7

ELECTRICAL SYSTEM 8

TROUBLESHOOTING 9

TUNING

EAM10003 TABLE OF CONTENTS

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yamaha Motorrad Handbücher

Yamaha

Yamaha 2009 XV250Y Bedienungsanleitung

Yamaha

Yamaha TRACER MT09 TRA Bedienungsanleitung

Yamaha

Yamaha diversion XJ6SA Bedienungsanleitung

Yamaha

Yamaha 1992 XV535B Bedienungsanleitung

Yamaha

Yamaha TT-R125(T) Anwendungshandbuch

Yamaha

Yamaha FZ150 Installationshandbuch

Yamaha

Yamaha WR450F Anwendungshandbuch

Yamaha

Yamaha CYGNUS RAY ZR 2022 Handbuch

Yamaha

Yamaha YZF-R6 Bedienungsanleitung

Yamaha

Yamaha Rhino YXR66FAV 2006 Bedienungsanleitung

Yamaha

Yamaha Sniper T135 SE Bedienungsanleitung

Yamaha

Yamaha XC200T Bedienungsanleitung

Yamaha

Yamaha MT-01 Bedienungsanleitung

Yamaha

Yamaha VMX17YB 2009 Bedienungsanleitung

Yamaha

Yamaha YZF-R6M Bedienungsanleitung

Yamaha

Yamaha Nouvo AT135 Bedienungsanleitung

Yamaha

Yamaha WR250F(S) Anwendungshandbuch

Yamaha

Yamaha MT-07 2016 Bedienungsanleitung

Yamaha

Yamaha WR450F(T) Anwendungshandbuch

Yamaha

Yamaha RD250 Bedienungsanleitung

Yamaha

Yamaha PW50J Bedienungsanleitung

Yamaha

Yamaha WR400F Anwendungshandbuch

Yamaha

Yamaha 1993 YZF750SPE Bedienungsanleitung

Yamaha

Yamaha XV19CSD Bedienungsanleitung

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

KTM

KTM 350 XCF-W USA Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

MOTO GUZZI

MOTO GUZZI QUOTA 1100 ES Bedienungsanleitung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

KTM

KTM Freeride E-XC 2021 Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Ducati

Ducati 996 Bedienungsanleitung

BMW

BMW MOTORRAD K 1200 R Sport Installations- und Wartungshandbuch

BMW Motorrad

BMW Motorrad G 650 GS 2007 Installations- und Wartungshandbuch