Yamaha LP-3 Bedienungsanleitung

4Attach the braces.

1Attach the braces to the center of the upper beam using

the short screws (B). Do not tighten the screws yet.

2Attach the stays to the side panels using the remaining

long screws (A). Again, do not tighten the screws yet.

3Tighten the screws when all four are in place.

5Set the attachments.

Note: Fix them using small screws (C).

6Attach the keyboard to the stand.

1After making sure that the keyboard and the stand are

both facing in the same direction, place the keyboard on

the stand so that the holes of the stand are aligned with

the holes in the bottom of the keyboard.

Note: Be careful not to let your finger get caught between the

stand and the keyboard.

2Secure the keyboard using the knob bolts (E).

Note: Do not tighten the bolts until all four bolts are in place.

M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

LP-3 Assembly Instructions

Correct

tightenning

1Secure the upper beam

with long screws (A).

2Attach the caps (D).

Upper beam

Right

side

panel

Left

side

panel

Braces 2 pcs.

(identical)

Correct

tightenning

Insufficient

tightenning

(A) (A)

(B)

Insufficient

tightenning

Do not hold the LP-3 in the

shaded areas, to avoid

getting your fingers

caught.

Hand

Danger

Bottom of the

keyboard

Hand

HandHand

Danger

Slide the keyboard from

rear to front as your place

it on the stand to align

the bolt holes.

Small screws

(C)

Attach-

ments

CAUTION

• Be careful not to confuse parts, and be sure to install all parts

in the correct direction. Please assemble in accordance with

the sequence given below.

• Assembly should be carried out by at least two persons.

• Be sure to use the correct screw size, as indicated below. Use

of incorrect screws can cause damage.

• Be sure to tighten up all screws upon completing assembly of

each unit.

• To disassemble, reverse the assembly sequence given below.

• If the main unit creaks or is otherwise unsteady when you play

on the keyboard, refer to the assembly diagrams and retighten

all screws.

Assembly procedure

1 You will need a Phillips screwdriver to assemble the

stand.

2Open the box and remove all parts. Make sure that all

of the parts are included.

Screw set (VS64540)

(A) Long screws

(6 x 30 mm) (D) Caps(B) Short screws

x 16 mm) (C) Small screws

(4 x 8 mm) (E) Knob bolts

(6 x 40 mm)

6 pcs. 2 pcs. 4 pcs. 4 pcs. 4 pcs.

Attachments

4 pcs.

3Attach the upper beam and cap (D).

Notes: Tighten four long screws (A) loosely at first, then do

them hardly to set each screw in place correctly.

When inserting the screws, turn them in loosely at

first, then tighten them after making sure the upper

beam is positioned correctly.

Inhaltsverzeichnis

Andere Yamaha Rack & Stand Handbücher

Yamaha

Yamaha L-7 Installationsanleitung

Yamaha

Yamaha SWX3220-16MT Bedienungsanleitung

Yamaha

Yamaha SPM-K1 - Mounting Kit For Speaker Bedienungsanleitung

Yamaha

Yamaha L-85S Bedienungsanleitung

Yamaha

Yamaha RIO1608-D Bedienungsanleitung

Yamaha

Yamaha HEXRACK Drum Rack Mount System HXR2L Bedienungsanleitung

Yamaha

Yamaha L-85 Bedienungsanleitung

Yamaha

Yamaha L-125 Bedienungsanleitung

Yamaha

Yamaha L-85 Bedienungsanleitung

Yamaha

Yamaha SPM-K8 Bedienungsanleitung

Yamaha

Yamaha RIO3224-D Bedienungsanleitung

Yamaha

Yamaha LW-16 Installationsanleitung

Yamaha

Yamaha PortaTone PSR-210 Installationsanleitung

Yamaha

Yamaha Hi-Hat Bedienungsanleitung

Yamaha

Yamaha VK80 Bedienungsanleitung

Yamaha

Yamaha DTX RS10-HXR Bedienungsanleitung

Yamaha

Yamaha YTS-T500 Bedienungsanleitung

Yamaha

Yamaha BS-9000 Series Bedienungsanleitung

Yamaha

Yamaha LG-800 Bedienungsanleitung

Yamaha

Yamaha Stand for Silent Bass BST1 Bedienungsanleitung

Yamaha

Yamaha PDS-342 Bedienungsanleitung

Yamaha

Yamaha SPS-HF101 Handbuch

Yamaha

Yamaha YDS-12 Bedienungsanleitung

Yamaha

Yamaha L-2L Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung