Yamaha PMT-L11/H15 Bedienungsanleitung

Digital Cinema Projector

Ceiling Bracket

PMT-L11 (for Low Ceilings)

PMT-H15 (for High Ceilings)

Installation Manual

Be sure to read this manual thoroughly

before using this bracket. After you have

read this manual, retain it for future

reference.

When installing the projector using this

bracket, all installation work must be

performed by a qualified contractor or

dealer personnel. The customer must

never attempt to perform this installation

work.

Packing List .................................................................................................................................. 4

Names of Parts ............................................................................................................................. 5

Dimensions of Parts .................................................................................................................... 7

Guidelines for the Projector Installation Position and Screen Size ........................................ 8

Installation Examples ................................................................................................................ 10

Installing the Projector .............................................................................................................. 11

Adjusting the Projection Angle................................................................................................. 14

Specifications ............................................................................................................................. 16

Contents

(PMT-L11)

(PMT-H15)

English Français Deutsch Svenska Italiano Español Nederlands

11PMT_TOC_E 5/29/1, 9:16 AM1

E-2

Safety Instruction

1. Always follow the instructions set forth in this manual when installing the projector

using this bracket.

Improper or inadequate installation could cause the projector to fall and injure someone.

2. The installation must be secure enough to bear the weight of the projector, the ceiling

bracket, and other hardware indefinitely, and must also be secure enough to withstand

vibration.

Inadequate installation could cause the projector to fall and injure someone.

3. To ensure safety, all bolts and screws must be tightened securely.

Loose bolts or screws could cause the projector to fall and injure someone.

4. Use only the parts provided with the bracket, and any other parts (commrecially

available) that are specified in this manual.

Using other parts could cause the projector to fall and injure someone.

5. Do not modify the bracket or the parts provided with the bracket.

Modifying the bracket or the other parts could cause the projector to fall and injure someone.

6. Do not use damaged parts.

Using damaged parts could cause the projector to fall and injure someone.

If any parts become damaged, contact your dealer.

7. Make sure to leave enough open space around the unit to allow heat generated by the

projector to dissipate.

Failure to provide adequate space around the unit could cause the projector to overheat internally, causing a

fire.

8. Before replacing the lamp cartridge, always remove the projector (with the mounting

adapter attached) from the ceiling bracket.

Attempting to replace the lamp cartridge while the projector is attached to the ceiling bracket could cause

the projector or the ceiling bracket to fall and injure someone.

11PMT_TOC_E 5/29/1, 9:16 AM2

E-3

English Français Deutsch Svenska Italiano Español Nederlands

9. Never hang from the projector or the ceiling bracket.

Hanging from the projector or the ceiling bracket could cause the projector or the ceiling bracket to fall and

injure someone.

10. Do not install the projector in a location near an air conditioning vent or in a location

subject to vibration.

Such conditions could have an adverse effect on the projector, and could even cause a fire or electric shock.

11. Do not install the projector in a location that is subject to high levels of dust or

humidity.

Dust accumulating inside the projector could cause a short circuit that in turn could cause a fire or electric

shock.

12. Do not install the projector in a location that is exposed to direct sunlight or in a

location that is subject to extreme fluctuations in temperature (such as near an air

conditioner).

Such conditions can cause the projector housing to warp or to become discolored.

13. Do not wipe the exterior of the ceiling bracket with benzene, paint thinner or cleaning

compounds.

Doing so could damage the finish.

14. Special techniques and experience are essential when installing the projector using

this bracket. Request that your dealer arrange to have the equipment installed. The

customer should never attempt to suspend the projector from the ceiling.

Improper installation could cause the ceiling bracket or the projector to fall and injure someone.

15. Once the projector is installed, safety checks should be conducted on a regular basis.

If the projector is used over an extended period of time, screws can become loose and the installation can

become weaker due to the passage of time, vibration, etc.

11PMT_TOC_E 5/29/1, 9:16 AM3

E-4

Packing List

Confirm that all of the parts are present.

PMT-L11

Ceiling bracket x 1

PMT-H15

Ceiling bracket x 1

Common Components (The following parts are provided with each bracket.)

Projector mounting adapter x 1 Projector mounting screws

(M6, pan head) x 4

Adjustment pole locking screws (M5) x 4

Safety brackets x 2

Safety wires x 2

Vertical angle adjustment screws

(M6, hexagonal head) x 4

Safety bracket mounting screws

(M4, pan head) x 4

Safety wire mounting screws

(M4, pan head) x 4

12PMT_BODY_E 5/29/1, 9:16 AM4

E-5

English Français Deutsch Svenska Italiano Español Nederlands

Names of Parts

PMT-L11

Ceiling bracket

Projector mounting adapter

Tilt angle adjustment screws

(There are also screws on the

opposite side.)

Vertical angle adjustment screws

(There are also screws on the

opposite side.)

Horizontal angle adjustment

screws

Mounting guide pin

12PMT_BODY_E 5/29/1, 9:16 AM5

E-6

PMT-H15

Height locking screw

Ceiling bracket

Projector mounting adapter

Tilt angle adjustment screws

(There are also screws on the

opposite side.)

Vertical angle adjustment screws

(There are also screws on the

opposite side.)

Horizontal angle adjustment screw

(four in total)

Height adjustment pole

Mounting guide pin

12PMT_BODY_E 5/29/1, 9:16 AM6

E-7

English Français Deutsch Svenska Italiano Español Nederlands

230 mm

Dimensions of Parts

Projector Mounting Adapter

with the DPX-1 installed (lens center)

[Top View]

PMT-H15

[Front View]

with the DPX-1 installed (lens center)

[Top View]

PMT-L11

[Front View]

200 mm

190 mm

212 mm

55 mm

80 mm

81 mm

201.65 mm

10˚10˚

Ø10 x 13 mm

Ø3/8 x 1/2 inch

(elliptical hole)

Ø10 mm

Ø3/8 inch

(hole)

Ø9 mm

Ø3/8 inch

(hole)

Ø9 x 13 mm

Ø3/8 x 1/2 inch

(elliptical hole)

10˚10˚

196 mm

170 mm

140 mm

120 mm

156 mm

777 to 1347 mm

896.65 to 1466.65 mm

226 mm

200 mm

140 mm

175 mm

Ø8.8 mm

Ø3/16 inch

(fully penetrating holes)

9-9/16 inch

7-7/8 inch

7-1/2 inch

8-3/8 inch

3-1/8 inch

2-3/16 inch

7-3/4 inch

6-11/16 inch

5-1/2 inch

3-3/16 inch

7-15/16 inch

4-3/4 inch

6-1/8 inch

30-9/16 to 53 inch

35-5/16 to 57-3/4 inch

1-3/16 inch

Ø10 x 13 mm

Ø3/8 x 1/2 inch

(elliptical hole)

Ø10 mm

Ø3/8 inch

(hole)

Ø9 mm

Ø3/8 inch

(hole)

Ø9 x 13 mm

Ø3/8 x 1/2 inch

(elliptical hole)

8-7/8 inch

7-7/8 inch

30 mm

5-1/2 inch

6-7/8 inch

12PMT_BODY_E 5/29/1, 9:16 AM7

E-8

Guidelines for the Projector Installation Position and

Screen Size

•The relationship between the projection distance and the screen size is shown below. Use these values as

guidelines for determining the installation position.

When using a 4:3 Screen

Screen size Projection distance (Wide/Tele.)

(inch) (m) (feet, inch)

60 2.4 – 2.9 7’ 10” – 9’ 6”

80 3.2 – 3.9 10’ 6” – 12’ 10”

100 4.0 – 4.9 13’ 1” – 16’

120 4.8 – 5.8 15’ 9” – 19’

150 6.1 – 7.3 20’ – 23’ 11”

200 8.1 – 9.8 26’ 7” – 32’ 2”

When using a 16:9 Screen

Screen size Projection distance (Wide/Tele.)

(inch) (m) (feet, inch)

60 2.6 – 3.2 8’ 6” – 10’ 6”

80 3.5 – 4.2 11’ 6” – 13’ 9”

100 4.4 – 5.3 14’ 5” – 17’ 5”

120 5.3 – 6.4 17’ 5” – 21’

150 6.6 – 8.0 21’ 8” – 26’ 3”

200 8.8 – 10.6 28’ 10” – 34’ 9”

Cautions

•The projection distance is the horizontal distance from the surface of the projector lens to the surface of the screen.

In the case of the DPX-1, the surface of the lens is recessed by approximately 4 cm (1-9/16 inch) from its exterior.

•Although the ceiling bracket permits adjustment of the vertical angle of the projector over a range of ±15˚, a large

angle adjustment will distort the projected image somewhat. Therefore, we recommend adjusting both the angle of

the projector and the angle of the screen.

Adjustment Through Digital Lens Shift

Screen size Distance to top edge of screen

(inch) (cm) (inch)

60 19 – 44 7-1/2 to 17-5/16

80 26 – 59 10-1/4 to 23-1/4

100 32 – 74 12-5/8 to 29-1/8

120 39 – 89 15-3/8 to 35

150 49 – 111 19-3/8 to 43-3/4

200 65 – 145 25-5/8 to 57

Distance from center of projector’s lens to top

edge of screen

(See the owner’s manual for the projector.)

Screen

Projection distance

(See the diagram below.)

Distance from ceiling installation surface to

center of lens

PMT-L11: 20 cm (7-7/8 inch)

PMT-H15: 90 to 147 cm (35-7/16 to 57-7/8 inch)

(can be adjusted in 3 cm (1-3/16 inch) steps)

Ceiling

When “SCREEN ASPECT” is set to 16:9 in the

SETUP menu, it is possible to use the projector’s

digital shift function to adjust the distance from the

center of the projector’s lens to the top edge of the

screen. The range of adjustment is indicated at right.

Distance from the center of the

ceiling bracket to the front edge

of the projector:

approximately 20 cm (7-7/8 inch)

Smaller ←Screen size →Larger

Projection distance Zoom function

Wide

Tele.

Wide

Tele.

Wide

Tele.

Projection distance Zoom function

Wide

Tele.

Wide

Tele.

Wide

Tele.

Smaller ←Screen size →Larger

12PMT_BODY_E 5/29/1, 9:16 AM8

E-9

English Français Deutsch Svenska Italiano Español Nederlands

PMT-H15 Height Adjustment

The height adjustment pole for the PMT-H15 has holes spaced 3 cm apart that can be used to adjust the

height. When the bracket is shipped from the factory, the pole is set at the shortest height.

Follow the procedure described below to adjust the pole to the appropriate height. For details on the

appropriate height, refer to “Guidelines for the Projector Installation Position and Screen Size” on page 8.

[Adjustment Procedure]

1Remove the safety pin.

2Loosen the nut, and then remove the height locking

screw.

Removing the height locking screw will unlock the

height adjustment pole from the ceiling bracket. In

order to ensure that the height adjustment pole does

not fall, always hold the pole while performing this

work.

3Determine the correct position in accordance with the

height of the screen, insert the height locking screw,

and then hand-tighten the nut.

4Securely tighten the four height adjustment pole

locking screws (M5) provided.

5Securely tighten the nut that was previously hand-

tightened.

6Be sure to insert the safety pin.

Finally, after adjusting the height, make sure that the

adjustment pole locking screws and the nut are all

tightened securely. Also make sure that the safety

pin has been inserted properly.

Safety pin

Nut

Adjustment pole locking screws

(Tighten the other side also.)

Height

locking

screw

Hight adjustment pole

Ceiling bracket

12PMT_BODY_E 5/29/1, 9:16 AM9

E-10

Installation Examples

When the ceiling is made of wood

1Drill matching holes through the reinforcing

plate and the ceiling in the proper locations

and then pass bolts through the holes.

2Tighten the bolts to secure the reinforcing

plate to a ceiling beam.

Cautions

•Make sure that the reinforcing plate is strong

enough to bear the weight of the projector and the

ceiling bracket.

•Use M8 bolts (commercially available).

When the ceiling is made of concrete

Reinforcing plate Washer

Nut and

washer

Bolt (M8)

Ceiling

beam

(Obtain the reinforcing plate, bolts, nuts and washers

commercially available.)

1Install anchor nuts in the ceiling.

2Screw the bolts into the anchor nuts.

Cautions

•Make sure that the anchor nuts are strong enough

to bear the weight of the projector and the ceiling

bracket.

•Use M8 bolts (commercially available).

Anchor nut

Ceiling

Nut and

washer

Bolt (M8)

(Obtain the anchor nuts, bolts, nuts and washers

commercially available.)

12PMT_BODY_E 5/29/1, 9:16 AM10

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yamaha Rack & Stand Handbücher

Yamaha

Yamaha YTS-F500 Handbuch

Yamaha

Yamaha YDS-12 Bedienungsanleitung

Yamaha

Yamaha L-65 Installationsanleitung

Yamaha

Yamaha LG-60 Bedienungsanleitung

Yamaha

Yamaha PMT-H35 Bedienungsanleitung

Yamaha

Yamaha SPS-3000 Bedienungsanleitung

Yamaha

Yamaha LW-16 Installationsanleitung

Yamaha

Yamaha SWX3220-16MT Bedienungsanleitung

Yamaha

Yamaha DTX RS10-HXR Bedienungsanleitung

Yamaha

Yamaha L-7 Bedienungsanleitung

Yamaha

Yamaha L-7 Installationsanleitung

Yamaha

Yamaha L-125 Bedienungsanleitung

Yamaha

Yamaha LG-8 Bedienungsanleitung

Yamaha

Yamaha HAF2-2112 Bedienungsanleitung

Yamaha

Yamaha L-85 Bedienungsanleitung

Yamaha

Yamaha PWK-150 Bedienungsanleitung

Yamaha

Yamaha RS-70 Bedienungsanleitung

Yamaha

Yamaha LG-8 Bedienungsanleitung

Yamaha

Yamaha YRS-1500 Bedienungsanleitung

Yamaha

Yamaha L-7S Bedienungsanleitung

Yamaha

Yamaha L-140 Bedienungsanleitung

Yamaha

Yamaha RS70 Bedienungsanleitung

Yamaha

Yamaha 740 Bedienungsanleitung

Yamaha

Yamaha HCB-L1B Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung