Yard Works 060-1526-0 Bedienungsanleitung

Contact-free Reel Mower

model number 060-1526-0 | contact us: 1 866 523-5218

Instruction

Manual

IMPORTANT:

Read and understand all safety rules and operating

instructions before using this product.

model number 060-1526-0 | contact us: 1 866 523-5218 model number 060-1526-0 | contact us: 1 866 523-5218

2 3

Table of Contents

Know Your Mower

SPECIFICATIONS 2

KNOW YOUR MOWER 3

EXPLODED VIEW 4

PARTS LIST 5

ASSEMBLY 6

ATTACHING THE HANDLE 8

CUTTING HEIGHT ADJUSTMENTS 9

OPERATION 9

CHECKING THE ADJUSTMENT 10

SAFETY AND MAINTANCE 11

WARRANTY 12

Cutting path: 18" (45.7 cm)

Height adjustments: 1-3 1/8" (25-79 mm)

Weight: 26 Ib 7 oz (12 kg)

1.Top handle

2.Centre handle

pieces

3. Lower handle

4. Foam grip

5. Carriage bolts

6. Knobs

7. Reel mower

KNOW YOUR REEL MOWER

Before attempting to assemble, empty carton and compare parts with parts list above.

• Carefully remove the parts from the box.

• Inspect the parts to make sure no breakage or damage occured during shipping.

• Do not discard the packing material until all parts are examined.

• If any parts are damaged or missing, please call 1-866-523-5218 for assistance.

• Be sure to tighten the knobs when assembled to prevent the handle from rocking.

model number 060-1526-0 | contact us: 1 866 523-5218 model number 060-1526-0 | contact us: 1 866 523-5218

4 5

Item Description Qty Item Description Qty

Exploded View

Part List

1 Foam grip 1

2 Top handle 1

3 Knob 6

4 6

6 Lower handle 1

7 Bolt M6*8 6

8 Washer 6*12 4

5 Centre handle pieces 2

9 Bracket 2

10 Nut M8 2

11 Washer 8*17 4

12 Rear wheel bracket assembly

14 Bolt M8*20 2

15 Adjusting knob assembly 2

16 Rear wheel 2

13 Adjusting bracket 2

221ØgnirpilC71

18 Washer 12*20 2

19 Bearing stiffener 1

20 Bolt M8*15 2

22 Cover 2

23 Clip ring Ø19 2

21 Spring washer Ø8 2

253*02rehsaW42

25 Front wheel 2

26 Supporting plate 2

27 Bearing 2

29 Pin 2

30 Wheel shaft 2

31 Left supporting assembly 1

28 Gear (L) 1

1revoC23

33 Self-tapping screw bolt 4

34 Cover 1

37 Nut M10 2

38 Gear (R) 1

39 Washer 15*35 2

36 Cylinder blade assy. 1

40 Right supporting assembly 1

41 Adjusting nut 2

42 Adjusting spring 2

43 Adjusting bolt 2

45 Cutting bar pivot rod 1

44 Blade assembly 1

35 Bolt M6*12 2

28 27 26 25 24 23

223032 31 29

7 8

Carriage bolt

model number 060-1526-0 | contact us: 1 866 523-5218 model number 060-1526-0 | contact us: 1 866 523-5218

6 7

Assembly

NOTE: Do not completely tighten knobs until

assembly is complete.

ASSEMBLE THE HANDLE

1. Insert the two centre handle pieces (4)

into the left and right side of the top

handle (2) and secure with two carriage

bolts (5) and knobs (3) provided.

2. Attach the top handle sub-assembly

previously assembled, to the lower

handle (6) sub-assembly using four

carriage bolts (5), and knobs (3)

provided.

3. Tighten all the knobs on the joints of

the handle assembly.

model number 060-1526-0 | contact us: 1 866 523-5218 model number 060-1526-0 | contact us: 1 866 523-5218

8 9

Assembly

Operation

ATTACHING THE HANDLE TO THE MOWER BASE

Align holes (1) at the lower end of each handle arm with posts (2) extending

from the mower base side plates. Mount the holes onto the posts, one at a

time, and press inward on handle to secure the fitting.

CUTTING HEIGHT ADJUSTMENTS

The cutting height of the mower adjusts from 25mm – 80mm with 5 positions for

adjustment height by moving the height adjustment levers to the required position.

To achieve the lowest cutting position, one at a time, move the adjustment levers

on both sides, located next to the smaller wheels, up to the highest position.

To achieve the highest cutting position, move the adjustment levers on both sides

to their lowest position.

Other cutting heights are achieved by moving the adjustment levers to any stop

between the highest and lowest positions.

•

The highest cutting position

The lowest cutting position

The height adjustment knob

model number 060-1526-0 | contact us: 1 866 523-5218 model number 060-1526-0 | contact us: 1 866 523-5218

10 11

Operation

Safety and Maintenance

CHECKING THE ADJUSTMENT

The cutting mechanism is preset. After a long period of use it may need to be

readjusted. Check cutting performance and adjust if necessary.

1. Adjust the space between reel blades and cutter bar.

2. Turn the screw clockwise to move the lower blade towards the spindle blade.

Turn the screw counter-clockwise to move the lower blade away from the

spindle blade.

3. When the space equals the thickness of paper (0.12 mm), insert a piece of

paper between the blades and the cutter bar, and quickly turn the wheel by

hand.

4. All blades should slice the paper evenly.

WARNING: Clean any grinding compound or debris from

cutter bar blade, reel blade, pinions and pawls.

NOTE:Use industrial or value tapping compound between 100

wheel bearing grease.

such as dandelions and may bend the weeds instead of cutting

them. Cut often to prevent long weeds from growing. When

lengths are long weeds and tall grass will fold before contacting

the cutting bar.

IMPORTANT SAFETY INFORMATION

•

reel. Although a motor does not power this

mower, when the wheels turn the reel spins

and poses a cutting risk.

• Never mow when grass is wet as it can be

slippery.

• Do not use the reel mower while barefoot or

while wearing sandals.

• Walk behind and never run while using reel

mower. Always make sure of your footing

when using this reel mower.

• Never intentionally strike or hit trees, fences,

etc. This can cause injuries or severely

damage the reel mower mechanisms.

• Make sure your reel mower is in a safe

operating condition.

or have the

provider before using.

CARE AND MAINTENANCE

1. A minimum amount of care is required to

ensure smooth operation of your mower.

2.To avoid damage to mower or cutting

blades, keep area to be mowed free of

debris.

3. For best results, regularly apply lubricant

to mower’s cutting surfaces, cutting reel

axle shaft and wheels.

SHARPENING THE CUTTING BLADES:

1. Spread a thin layer of lapping compound

on the front edge of the reel blades.

2. Adjust the cutter bar so that the blade has

the cutter bar.

Caution: Do not overtighten the adjusting

screws, as this could damage the cutter bar.

3.Turn the reel blades until the front edge of the

cutter bar blade is polished.

CLEANING AND STORAGE:

1.Clean the exterior of the machine thoroughly

using a soft brush and cloth before storing.

Do not use water, solvents or polishes.

2.Turn the mower on its side to clean the

blade area.

WARNING: Do not place hands in the mower

near blades. If grass cuttings are compacted in

the blade area, remove using a wood or plastic

cleaning tool appropriate for the cleaning of the

blades.

3. Store the mower in a dry place. Do not place

other objects on top of the mower during storage.

CARE AND MAINTENANCE

Maintenance tip:

Reel mowers are relatively low maintenance.

For consistent cutting follow these below

instructions:

•Always keep the cutting bar properly

adjusted. Refer to the instruction manual for

further directions.

• Regularly clean and lube cutting edges with

light spray oil.

Made in China. Imported by YardWorks Canada Toronto,

Canada M4S 2B8

0,12mm

• Do not attempt to operate this reel mower if

damaged. Contact customer service

reel

model number 060-1526-0 | contact us: 1 866 523-5218

Warranty

YARDWORKS CANADA will not be liable for incidental

or consequential loss or damage.

2-YEAR LIMITED WARRANTY

For TWO YEARS from the date of purchase

within Canada, YARDWORKS CANADA will,

at its option, repair or replace for the original

purchaser, free of charge, any part or parts

found to be defective in materials

or workmanship.

THIS WARRANTY DOES NOT COVER:

1. Any part that has become inoperative

due to misuse, commercial use, abuse,

neglect, accident, improper maintenance,

or alteration; or

2. The unit, if it has not been operated

and/or maintained in accordance with the

owner’s manual; or

3. Normal wear, except as noted below;

4. Routine maintenance items such as

lubricants, blade sharpening;

5. Normal deterioration of the exterior

FULL 120-DAY WARRANTY ON

NORMAL WEAR PARTS:

adaptors, blades, grass bags and tires.

These parts are warranted to the original

purchaser to be free from defects in materials

and workmanship for a period of one

hundred twenty (120) days from the date of

retail purchase.

HOW TO OBTAIN SERVICE:

Warranty service is available by calling

the toll-free helpline, at 1-866-523-5218.

The factory will not accept the return

of a complete unit unless prior written

permission has been extended by

YARDWORKS CANADA.

TRANSPORTATION CHARGES:

Transportation charges for the

movement of any power equipment

unit or attachment are the responsibility

of the purchaser. The purchaser must

pay transportation charges for any part

submitted for replacement under this

warranty unless such return is requested

in writing by YARDWORKS CANADA.

OTHER WARRANTIES:

All other warranties, express or implied,

including any implied warranty of

merchantability is limited in its duration

to that set forth in this express limited

warranty. The provisions as set forth in

this warranty provide the sole and

exclusive remedy of YARDWORKS

CANADA obligations arising from the

sale of its products.

Inhaltsverzeichnis

Andere Yard Works Rasenmäher Handbücher

Yard Works

Yard Works 60-1812 Bedienungsanleitung

Yard Works

Yard Works 400 Series Bedienungsanleitung

Yard Works

Yard Works 60-1607-8 Bedienungsanleitung

Yard Works

Yard Works 060-1662-4 Bedienungsanleitung

Yard Works

Yard Works 060-1981-4 Bedienungsanleitung

Yard Works

Yard Works CLM48BCU1 Bedienungsanleitung

Yard Works

Yard Works CLM48CU Bedienungsanleitung

Yard Works

Yard Works 1816-16-1 Bedienungsanleitung

Yard Works

Yard Works 060-1803-0 Bedienungsanleitung

Yard Works

Yard Works 60-1772-2 Bedienungsanleitung

Yard Works

Yard Works 060-3808-8 Bedienungsanleitung

Yard Works

Yard Works 060-1773-0 Bedienungsanleitung

Yard Works

Yard Works 270-1115 Bedienungsanleitung

Yard Works

Yard Works 060-1500-0 Bedienungsanleitung

Yard Works

Yard Works 060-1330-4 Bedienungsanleitung

Yard Works

Yard Works 60-1638-4 Bedienungsanleitung

Yard Works

Yard Works 270-1241 Bedienungsanleitung

Yard Works

Yard Works 622019-1 Bedienungsanleitung

Yard Works

Yard Works AutoDrive 60-1827-4 Bedienungsanleitung

Yard Works

Yard Works 60-1769-2 Bedienungsanleitung

Yard Works

Yard Works Yardworks 60-1620-4 Bedienungsanleitung

Yard Works

Yard Works 60-1535-8 Bedienungsanleitung

Yard Works

Yard Works 060-1790-8 Bedienungsanleitung

Yard Works

Yard Works 270-1252 Bedienungsanleitung

Beliebte Rasenmäher Handbücher anderer Marken

RHINO

RHINO 1958 Bedienungsanleitung

Wolf Garten

Wolf Garten Compact plus 40 B Bedienungsanleitung

Cub Cadet

Cub Cadet LTX 1045 Bedienungsanleitung

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Bedienungsanleitung

Challenge

Challenge CH18V2 Betriebsanleitung

TALEN TOOLS

TALEN TOOLS AVR HGM30 Bedienungsanleitung

DEWEZE

DEWEZE ATM-725 Bedienungsanleitung

Weed Eater

Weed Eater 180083 Bedienungsanleitung

Husqvarna

Husqvarna Poulan Pro PP185A42 Bedienungsanleitung

Better Outdoor Products

Better Outdoor Products Quick Series Bedienungsanleitung

Cub Cadet

Cub Cadet 23HP Z-Force 60 Betriebsanleitung

MTD

MTD 795, 792, 791, 790 Bedienungsanleitung

Toro

Toro Groundsmaster 3505-D Bedienungsanleitung

Dennis

Dennis FT 610 Bedienungsanleitung

MTD

MTD 126-220-000 Bedienungsanleitung

Toro

Toro 74806 Bedienungsanleitung

Stihl

Stihl RMA 443 PV Bedienungsanleitung

Yard-Man

Yard-Man 3700-0 Bedienungsanleitung