YASKAWA Profibus-DP SGDH Series Bedienungsanleitung

MANUAL NO. TOB-C718-8C

形式 JUSP-NS500, JUSP-NS500-E

Profibus-DP

アプリケーションモジュール

Σ-ΙΙ シリーズSGDH

取扱説明書

製品を安全にお使い頂くために，本書を必ずお読みください。

また，本書をお手元に保管していただくとともに，最終的に本製品をご使用になる

ユーザー様のお手元に確実に届けられるよう，お取り計らい願います。

Type JUSP-NS500, JUSP-NS500-E

Profibus-DP

Application Module

Σ-ΙΙ Series SGDH

INSTRUCTIONS

To properly use the product, read this manual thoroughly and retain

for easy reference, inspection, and maintenance. Ensure the end user

receives this manual.

COSMOS以外（A5）（和英併記）新CI

or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording,

or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed

with respect to the use of the information contained herein. Moreover, because Yaskawa is

constantly striving to improve its high-quality products, the information contained in this

manual is subject to change without notice. Every precaution has been taken in the preparation

of this manual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained

in this publication.

iii

INTRODUCTION

■Manual Contents

This manual consists of Japanese Version and English Version.

• Japanese Version: Described on pages J-1 to J-20.

• English Version: Described on pages E-1 to E-20.

Use the Japanese Version or English Version as needed.

■User Instructions

Use these instructions for the following jobs:

• Checking Σ-II Series SERVOPACK on delivery

• Installing Σ-II Series SERVOPACK

• Wiring Σ-II Series SERVOPACK

• Operating Σ-II Series SERVOPACK

• Inspecting and maintenance of Σ-II Series SERVOPACK

E-1

INSTRUCTIONS

Σ-II Series SGDH Profibus-DP

Application Module

SYMBOLS FOR SAFE OPERATION - - - - - - - - - - - - - - - - - - - - - - - E-4

NOTES FOR SAFE OPERATION - - - - - - - - - - - - - - - - - - - - - - - - - E-4

1 PARTS - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-8

2 CHECKING ON DELIVERY - - - - - - - - - - - - - - - - - - - - - - - E-8

2.1 Checking Items - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-9

2.2 Appearance and Nameplate - - - - - - - - - - - - - - - - - - - - - - - E-9

2.3 Type Designation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-9

2.4 Mounting NS500 Module - - - - - - - - - - - - - - - - - - - - - - - - E-10

3 INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-12

3.1 Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-12

3.2 Installation Sites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-12

3.3 Orientation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-13

3.4 Installation Precautions - - - - - - - - - - - - - - - - - - - - - - - - - E-13

4 WIRING - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-14

4.1 Profibus-DP Connection Example - - - - - - - - - - - - - - - - - - E-15

4.2 Precautions on Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - E-15

5 GSD File - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-16

6 OPERATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-17

6.1 Precautions at Test Run - - - - - - - - - - - - - - - - - - - - - - - - - E-17

6.2 Precautions at Operation - - - - - - - - - - - - - - - - - - - - - - - - E-18

7 INSPECTION AND MAINTENANCE - - - - - - - - - - - - - - - E-18

E-2

8 MEASURES TO SATISFY THE EMC DIRECTIVE - - - - - - E-19

8.1 Profibus-DP Communication Cable - - - - - - - - - - - - - - - - - E-19

8.2 Fully Closed Encoder Cable - - - - - - - - - - - - - - - - - - - - - - E-19

8.3 The Core on the Cable - - - - - - - - - - - - - - - - - - - - - - - - - - E-19

8.4 Cable Clamp - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-20

8.5 Wiring Examples - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - E-21

E-3

This instruction manual covers Σ-II series SGDH Profibus-DP Application Module (herein-

after called NS500 Module), which is an application module to be connected to Σ-II series

SGDH SERVOPACK for Profibus-DP.

To properly use the NS500 Module, read this manual thoroughly and retain for easy refer-

ence for inspections and maintenance etc.

Reference materials are listed below:

Manual Titles Manual No.

Σ-II series SGMH/SGDH User’s Manual SIEPS80000005

Σ-II series SGDH Profibus-DP Application Module User’s Manual SIE-C718-8

AC SERVOMOTOR INSTRUCTIONS TOE-C231-2

Σ-II series SGDH Instruction Manual TOB-S800-32

E-4

SYMBOLS FOR SAFE OPERATION

In this manual, the NOTES FOR SAFE OPERATION are classified as “WARNING” or

“CAUTION”. The following symbols are used.

Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious personal injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or

moderate personal injury and/or damage to the equipment.

In some instances, items described in may also result in a serious accident.

In either case, follow these important items.

NOTES FOR SAFE OPERATION

Read this manual thoroughly before installation, operation, maintenance or inspection of the

AC Servo Drives.

CHECKING ON DELIVERY

STORAGE AND TRANSPORTATION

WARNING

CAUTION

(Ref.No.)

• When SGDH SERVOPACK is used with a NS500 Module mounted, the

parameters are automatically set so that the NS500 Module can be operated

from the first power ON.

For details of parameter setting methods, refer to Σ-II Series SGMH/SGDH User’s

Manual (SIEPS80000005).

E-8

(Ref.No.)

• If disinfectants or insecticides must be used to treat packing materials such as

wooden frames, pallets, or plywood, the packing materials must be treated

before the product is packaged, and methods other than fumigation must be

used.

Example: Heat treatment, where materials are kiln-dried to a core

temperature of 56°C for 30 minutes or more.

If the electronic products, which include stand-alone products and products installed

in machines, are packed with fumigated wooden materials, the electrical components

may be greatly damaged by the gases or fumes resulting from the fumigation process.

In particular, disinfectants containing halogen, which includes chlorine, fluorine, bro-

mine, of iodine can contribute to the erosion of the capacitors.

CAUTION

E-5

INSTALLATION

WIRING

OPERATION

(Ref.No.)

• Never use the equipment where it may be exposed to splashes of water, cor-

rosive or flammable gases, or near flammable materials.

Failure to observe this caution may lead to electric shock or fire.

E-12

(Ref.No.)

• SERVOPACK grounding must be in accordance with the national code and

consistent with sound local practices.

Failure to observe this warning may lead to electric shock or fire.

E-14

(Ref.No.)

• Do not connect three-phase power supply to SERVOPACK output terminals

U, V, and W.

Failure to observe this caution may lead to personal injury or fire.

E-14

• Securely tighten screws on the power supply and motor output terminals.

Failure to observe this caution can result in a fire.

E-14

(Ref.No.)

• To avoid inadvertent accidents, run the servomotor only in test run (without

load).

Failure to observe this caution may result in personal injury.

E-17

• Before starting operation with a load connected, set up parameters suitable

for the machine.

Starting operation without setting up parameters may lead to overrun failure.

E-17

• Before starting operation with a load connected, make sure emergency-stop

procedures are in place.

Failure to observe this caution may result in personal injury.

E-17

• During operation, do not touch the SERVOPACK’s heatsink.

Failure to observe this caution may result in burns.

E-18

CAUTION

WARNING

CAUTION

E-6

INSPECTION AND MAINTENANCE

(Ref.No.)

• Be sure to turn OFF power before inspection or maintenance.

Otherwise, electric shock may result.

E-18

• Never open the terminal cover while power is ON, and never turn ON power

when the terminal cover is open.

Otherwise, electric shock may result.

E-18

• After turning OFF power, wait at least five minutes before servicing the prod-

uct.

Otherwise, residual electric charges may result in electric shock.

E-18

(Ref.No.)

• Never change wiring while power is ON.

Failure to observe this caution may result in electric shock or personal injury.

E-18

WARNING

CAUTION

Note the following to ensure safe application.

• Some drawings in this manual are shown with the protective cover or shields removed, in

order to describe the detail with more clarity. Make sure all covers and shields are replaced

before operating this product.

• Some drawings in this manual are shown as typical example and may differ from the

shipped product.

• This manual may be modified when necessary because of improvement of the product,

modification or changes in specifications.

Such modification is made as a revision by renewing the manual No.

• To order a copy of this manual, if your copy has been damaged or lost, contact your

YASKAWA representative listed on the last page stating the manual No. on the front cover.

• YASKAWA is not responsible for accidents or damages due to any modification of the

product made by the user since that will void our guarantee.

E-7

WARNING LABEL

SERVOPACK warning label position

SERVOPACK Warning Label and Grounding Mark Position

May cause burn.

WARNING

CAUTION

Use proper grounding techniques.

Disconnect all power and wait 5 min.

before servicing. May cause electric shock.

Do not touch heat sink when power is ON.

ᔅߕࠕ࡯ࠬ✢ࠍធ⛯ߖࠃ

ෂޓ㒾 ㅢ㔚߅ࠃ߮㔚Ḯࠝࡈᓟ㧘ಽ㑆┵ሶㇱߦ⸅ࠆߥ㧍ᗵ㔚ߩᕟࠇ޽ࠅ

ㅢ㔚ߪࡅ࡯࠻ࠪࡦࠢߦ⸅ࠆߥ㧍Ἣ்ߩᕟࠇ޽ࠅ

ᵈޓᗧ

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere YASKAWA Steuereinheit Handbücher

YASKAWA

YASKAWA VIPA System 200V Bedienungsanleitung

YASKAWA

YASKAWA VIPA System SLIO Bedienungsanleitung

YASKAWA

YASKAWA V1000 SI-EM3D/V Bedienungsanleitung

YASKAWA

YASKAWA FM 054 Bedienungsanleitung

YASKAWA

YASKAWA IM 208-1DPx1 Bedienungsanleitung

YASKAWA

YASKAWA FM 054 Bedienungsanleitung

YASKAWA

YASKAWA MP2000 Series Bedienungsanleitung

YASKAWA

YASKAWA VIPA System SLIO Bedienungsanleitung

YASKAWA

YASKAWA IM 053MT Bedienungsanleitung

YASKAWA

YASKAWA CM085 Bedienungsanleitung

YASKAWA

YASKAWA MECHATROLINK Sigma 2 Series Bedienungsanleitung

YASKAWA

YASKAWA S-V Series Bedienungsanleitung

YASKAWA

YASKAWA Varispeed f7 Bedienungsanleitung

YASKAWA

YASKAWA VIPA SPEED7 Bedienungsanleitung

YASKAWA

YASKAWA MP2000 Series Bedienungsanleitung

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

YASKAWA

YASKAWA S-II Series Bedienungsanleitung

YASKAWA

YASKAWA VIPA System 200V Bedienungsanleitung

YASKAWA

YASKAWA VIPA System SLIO Bedienungsanleitung

YASKAWA

YASKAWA SI-EP3/V Bedienungsanleitung

YASKAWA

YASKAWA Motoman MLX200 Bedienungsanleitung

YASKAWA

YASKAWA IM 053PN Bedienungsanleitung

YASKAWA

YASKAWA VIPA HMI cloudPanel H41-L1A41-0 Bedienungsanleitung

YASKAWA

YASKAWA VIPA SLIO FM 050-1BB00 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung