Yealink CP930WP Bedienungsanleitung

For W60B firmware: 77.83.0.20 or later

For CP930W firmware: 87.83.0.20 or later

Quick Start Guide(V83.22)

DECT Conference Phone

CP930W-Base & CP930W

English | Deutsch | Español | Français

Table of Contents

English ..........................................1

Deutsch .....................................15

Español ......................................29

Français .....................................43

CP930W-Base Package Contents

Note: Yealink CP930W-Base DECT conference phone consists of one W60B base station and one

CP930W.

CP930W Package Contents

CP930W W60B Base Station Base Stand Charging Cradle

2 Power Adapters CP930W-Base & CP930W

Quick Start Guide

Charging Cradle Power Adapter

Ethernet Cable

CP930W CP930W-Base & CP930W

Quick Start Guide

W60B Package Contents

1. Connect the base station power and the network using method a or method b.

a. AC Power Option b. PoE (Power Over Ethernet) Option

Note:

• If you choose method a, use Yealink-supplied power adapter (5V/600mA). A third-party

power adapter may damage the base station.

• If you choose method b, you do not need to connect the power adapter. Make sure the

hub/switch is PoE-compliant.

2a. (Desktop Installation) Attach and remove the base stand.

Attach the Base Stand Remove the Base Stand

2b. (Wall-Mount Installation) Attach the base station.

Remove the snap-fits from the

holes horizontally.

MAC

Assembling the DECT Phone

Align the snap-fits with the corresponding holes

and push forward, snapping them into the holes.

MAC

59mm

MAC

3. Connect the charging cradle and charge the CP930W.

Note:

• Use Yealink-supplied power adapter (12V/1A). A third-party power adapter may damage

the DECT conference phone.

• Check the charging status on the top-right corner of the LCD screen.

4. Connect the optional PC.

5. Connect the optional SD card.

Micro USB Port

Micro SD Slot

Hardware Overview

Registration

You can register up to 8 CP930W to one W60B base station. Each CP930W can only be regis-

tered up to one base station.

When the CP930W LCD screen prompts “Unregistered!”, long press on the base station till

the registration LED indicator flashes.

There are two methods to register a new CP930W:

Easy Registration:

1. Tap the Reg soft key on the CP930W to register quickly.

Normal Registration:

1. Tap the OK soft key on the CP930W, and then select Register Handset.

2. Tap the OK soft key after searching a base station successfully.

3. Enter the base station PIN (default: 0000), and then tap the Done soft key to complete the

registration.

To register to multiple base stations, tap the Menu->Settings->Registration->Register Hand-

set, then repeat steps 2-4.

Note:

• If the CP930W is registered to the base station successfully, the LCD screen prompts

“Handset Subscribed” and “Base NO.”( the “NO.“ indicates the last 4 characters of the base

station’s MAC address).

• If the CP930W LCD screen prompts “Searching for Base”, check that your base station is

powered on.

Getting Started

Mute Key

Speaker

Keypad

Volume(+) Key

Volume(—) Key

Microphone

LCD Screen

Soft Keys

On-hook/Power Key

Bluetooth Key

OK Key

Welcome

Initializing...Please wait

Up Navigation Key

Microphone

Off-hook Key

Down Navigation Key

Network Settings

You can configure the base station to obtain network settings in one of the following ways:

DHCP

By default, the base station attempts to contact a DHCP server in your network to obtain the val-

id network settings, such as IP address, subnet mask, gateway address and DNS address.

Static

If the base station cannot contact a DHCP server for any reason, you need to configure the IP

address, subnet mask, gateway address, primary DNS address and secondary DNS address for

the base station manually.

To configure the network parameters for the base station manually:

1. Tap Menu->Settings->Advanced Settings (default PIN: 0000)->Network->Basic.

2. Select the desired IP addressing mode from the IP Mode field.

3. Select the desired IP addressing mode.

4. Make the desired changes.

5. Tap the Save soft key to accept the change.

Note:

• The DECT conference phone supports either or both IPv4 and IPv6 addressing modes, but

IPv6 is disabled by default.

• Wrong network settings may result in inaccessibility of your phone and may affect the

network performance. Contact your system administrator for the network parameters.

Turning CP930W On/Off

To turn the CP930W on, do one of the following:

• Long tap , wait until the LCD screen lights up.

• Place the CP930W in the charging cradle. The CP930W will be turned on automatically.

To turn the CP930W off:

1. Long tap .

The LCD screen prompts you whether to power off the phone.

2. Tap the Yes soft key to continue.

Handset Name

To rename the handset:

1. Tap Menu->Settings->Basic Settings->Phone Name.

2. Enter the value in the Phone Name field.

Basic Operations

Handset Settings

3. Tap the Save soft key to accept the change.

Volume Adjustment

Tap or to adjust the volume of the speaker, ringer or media.

Ring Tones

1. Tap Menu->Settings->Basic Settings->Sound->Ring Tones.

2. Tap or to select Common or Intercom Call.

3. Tap or to select the desired ring tone.

4. Tap the Save soft key to accept the change.

Local Directory

To add a contact:

1. Tap the Directory soft key from the idle screen.

2. Tap the Add soft key to add a contact.

3. Enter a unique contact name in the Name field and contact numbers in the corresponding

fields.

4. Tap the Save soft key to accept the change.

To edit a contact:

1. Tap the Directory soft key from the idle screen.

2. Select the desired contact, tap the Options soft key and then select Detail.

3. Edit the contact information.

4. Tap the Save soft key to accept the change.

To delete a contact:

1. Tap the Directory soft key from the idle screen.

2. Select the desired contact, tap the Options soft key and then select Delete.

The LCD screen prompts you whether to delete the selected item.

3. Tap Yes to continue.

Placing Calls

To place a call directly:

1. Do one of the following:

• Tap , enter the phone number.

• Enter the phone number.

2. Tap , or the OK key to dial out.

To place a call from the local directory:

1. Tap the Directory soft key from the idle screen.

2. Tap or to select the desired directory type.

3. Highlight the desired entry, and then tap or the OK key to dial out.

To place a call from the call history:

1. Tap the History soft key when the IP phone is idle, and then select the desired call history list.

Basic Call Features

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Yealink Konferenztelefon Handbücher

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink CP860 SERIES Gebrauchsanweisung

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP935W Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP930W Telesystem Bedienungsanleitung

Yealink

Yealink CP965 Bedienungsanleitung

Yealink

Yealink CP925 Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink CP930W-Base Bedienungsanleitung

Yealink

Yealink CP930W Telesystem Bedienungsanleitung

Yealink

Yealink Zoom Rooms CP960-UVC Kurzanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP935W Bedienungsanleitung

Yealink

Yealink One Talk CP960 Gebrauchsanweisung

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP925 Bedienungsanleitung

Yealink

Yealink CP965 Bedienungsanleitung

Yealink

Yealink CP920 Gebrauchsanweisung

Yealink

Yealink One Talk CP960 Bedienungsanleitung

Yealink

Yealink CP Series Bedienungsanleitung

Beliebte Konferenztelefon Handbücher anderer Marken

Polycom

Polycom SoundStation 2W Service-Handbuch

Vixtel

Vixtel glass 1100 Bedienungsanleitung

Oregon Scientific

Oregon Scientific OS200 Bedienungsanleitung

Polycom

Polycom SoundStation IP 4000 Bedienungsanleitung

AbleNet

AbleNet Prism C Bedienungsanleitung

Albrecht

Albrecht Multicom Bedienungsanleitung

Fortinet

Fortinet FortiFone FON-C70 Bedienungsanleitung

Avaya

Avaya B159 Series Bedienungsanleitung

Konftel

Konftel Konftel 55W Bedienungsanleitung

Mitel

Mitel 6867i Premium Bedienungsanleitung

Polycom

Polycom SoundStation 2W Service-Handbuch

Polycom

Polycom SoundStation IP 6000 Bedienungsanleitung

Mitel

Mitel 6970 IP Bedienungsanleitung

Konftel

Konftel 60W Bedienungsanleitung

Mitel

Mitel UC360 Bedienungsanleitung

Cortelco

Cortelco CP4400 Series Einrichtungshandbuch

LifeSize

LifeSize Phone HD Bedienungsanleitung

Polycom

Polycom realpresence trio 8800 Bedienungsanleitung