Yealink SIP-T54W Bedienungsanleitung

Quick Start Guide

Prime Business Phone – SIP-T54W

SIP-T54W

Prime Business Phone

Developed by: BUROSERV Australia

Level 2, 9 Help Street Chatswood NSW 2067. Australia

Version 1.0

QUICK START GUIDE

10 February 2020

Applies to firmware version 96.84.0.10 or later.

Quick Start Guide

Prime Business Phone – SIP-T54W

Contents

Packaging Contents .........................................................................................................................................3

Assembling the Phone .....................................................................................................................................3

Starting the Phone...........................................................................................................................................6

Configuring Your Phone...................................................................................................................................6

Configuring via web user interface ...................................................................................................6

Configuring via phone user interface................................................................................................7

Basic Call Features ...........................................................................................................................................7

Placing a Call .....................................................................................................................................7

Answering a Call ................................................................................................................................8

Ending a Call......................................................................................................................................8

Redialing a Call ..................................................................................................................................8

Muting and Un-muting a Call ............................................................................................................8

Holding and Resuming a Call.............................................................................................................8

Transferring a Call .............................................................................................................................8

Forwarding a Call ..............................................................................................................................9

Initiating a Conference Call ...............................................................................................................9

Configuring and Using Speed Dial .....................................................................................................9

Listening to Voice Mails ....................................................................................................................9

Customizing Your Phone................................................................................................................................10

Managing Call History .....................................................................................................................10

Managing Contact Directory ...........................................................................................................10

Volume Adjustment ........................................................................................................................10

Setting Ring Tones...........................................................................................................................10

Quick Start Guide

Prime Business Phone – SIP-T54W

PACKAGING CONTENTS

The following items are included in your package. If you find anything missing, contact your system

administrator:

Note:

•We recommend that you use the accessories provided or approved by Yealink. The use of unapproved

third-party accessories may result in reduced performance.

ASSEMBLING THE PHONE

1. Attach the stand, as shown below:

Note:

•

You can also mount the phone to a wall.

Quick Start Guide

Prime Business Phone – SIP-T54W

2. Connect the handset and optional headset, as shown below:

Note:

•

The headset should be purchased separately.

3. Connect the USB flash driver, as shown below:

Note:

•

The USB port can also be used to connect other USB devices, such as EXP50, USB headset and so on.

Quick Start Guide

Prime Business Phone – SIP-T54W

4. Connect the network and power, as shown below:

You have two options for network and power connections. Your system administrator will advise you which

one to use.

Note:

•The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party

power adapter may cause the damage to the phone. If you are connecting a PC to your phone, we

recommend that you use the Ethernet cable provided by Yealink. If inline power (PoE) is provided,

you don’t need to connect the power adapter. Make sure the hub/switch is PoE-compliant.

Quick Start Guide

Prime Business Phone – SIP-T54W

STARTING THE PHONE

After the IP phone is connected to the network and supplied

with power, it automatically begins the initialization process.

After startup, the phone is ready for use. You can configure the

phone via web user interface or phone user interface.

CONFIGURING YOUR PHONE

CONFIGURING VIA WEB USER INTERFACE

Accessing the web user interface:

1. Press the OK key when the phone is idle to obtain the IP address of the phone.

2. Open a web browser on your computer, enter the IP address into the address bar

(e.g., "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.

3. Enter the user name (default: admin) and password (default: admin) in the login page and click Login.

Network Settings: Click on Network->Basic->IPv4 Config

You can configure the network settings in the following ways:

DHCP: By default, the phone attempts to contact a DHCP server in your network to obtain its valid network

settings, e.g., IP address, subnet mask, gateway address and DNS address.

Static IP Address: If your phone cannot contact a DHCP server for any reason, you need to configure them

manually.

Note:

•The IP phone also supports IPv6, but IPv6 is disabled by default.

•Wrong network settings may result in inaccessibility of the phone and may have an impact on

the network performance. Contact your system administrator for more information.

Account Settings: Click on Account->Register->Account X (X=1, 2, 3...15, 16)

Parameters of the account:

Line Active: You can select Enabled/Disabled to enable/disable the account.

Label: It is shown on the LCD screen to identify the account.

Display Name: It is shown as Caller ID when placing a call.

User Name: It is provided by ITSP for registration (required).

Password: It is provided by ITSP for registration (required).

Server Host: It is provided by ITSP for registration (required).

Quick Start Guide

Prime Business Phone – SIP-T54W

(Green) Registered (Yellow) Registering (Gray) Register Failed

Note:

•Check with your system administrator if any error appears during the registration process or a specific

configuration is required for your registration.

CONFIGURING VIA PHONE USER INTERFACE

Configuring Network Settings:

Navigate to Menu->Advanced (default password: admin)->Network->WAN Port->IPv4.

Account Settings:

Navigate to Menu->Advanced (default password: admin)->Accounts.

Note:

•

For more information on account parameters, refer to Configuring via web user interface above.

BASIC CALL FEATURES

PLACING A CALL

Using the handset:

1. Pick up the handset.

2. Enter the number, and then press the Send.

Using the speakerphone:

1. With the handset on-hook, press .

2. Enter the number, and then press the Send.

Using the headset:

1. With the headset connected, press to activate the headset mode.

2. Enter the number, and then press the Send.

Note:

•During a call, you can alternate between the headset, hands-free speakerphone and handset modes by

pressing Reject, pressing the HEADSET key, the Speakerphone key or by picking up the handset. Headset

mode requires a connected headset.

Quick Start Guide

Prime Business Phone – SIP-T54W

ANSWERING A CALL

Using the handset:

Pick up the handset.

Using the speakerphone:

Press .

Using the headset:

Press .

ENDING A CALL

Using the handset:

Hang up the handset or press the End Call soft key.

Using the speakerphone:

Press or End Call.

Using the headset:

Press the End Call.

REDIALING A CALL

•Press to enter the Placed Calls list, press or to select the desired entry, and then press

or Send.

•Press twice when the phone is idle to dial out the last dialed number.

MUTING AND UN-MUTING A CALL

•Press to mute the microphone during a call.

•Press again to un-mute the call.

HOLDING AND RESUMING A CALL

To Hold a call:

Press or Hold during an active call.

To Resume the call, do one of the following:

•If there is only one call on hold, press or Resume.

•If there is more than one call on hold, press or to select the desired call,

and then press or Resume.

TRANSFERRING A CALL

You can transfer a call in the following ways:

Blind Transfer

1. Press or Transfer during an active call. The call is placed on hold.

2. Enter the number you want to transfer to.

3. Press the BTransfer.

Performing a Semi-Attended Transfer

1. Press or Transfer during an active call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press Send.

Note:

•

You can reject an incoming call by pressing the Reject soft key.

Quick Start Guide

Prime Business Phone – SIP-T54W

3. Press or Transfer when you hear the ring-back tone.

Performing an Attended Transfer

1. Press or Transfer during an active call. The call is placed on hold.

2. Enter the number you want to transfer to, and then press Send.

3. Press or Transfer when the second party answers.

FORWARDING A CALL

To enable call forward:

1. Navigate to Menu->Features->Call Forward.

2. Select the desired forward type:

Always Forward----Incoming calls are forwarded unconditionally.

Busy Forward----Incoming calls are forwarded when the phone is busy.

No Answer Forward----Incoming calls are forwarded if not answered after a period of time.

3. Enter the number you want to forward to. For No Answer Forward, press or to select the

desired ring time to wait before forwarding from the After Ring Time field.

4. Press Save to accept the change.

INITIATING A CONFERENCE CALL

1. Press Conference during an active call. The call is placed on hold.

2. Enter the number of the second party, and then press Send.

3. Press Conference again when the second party answers. All parties are now joined in the conference.

4. Press End Call to disconnect all parties.

CONFIGURING AND USING SPEED DIAL

To configure a speed dial key:

1. Navigate to Menu->Features->Dsskey.

2. Select the desired DSS key, and then press Enter.

3. Select Speed Dial from the Type field, select the desired line from the Account ID field, enter a label in

the Label field, enter the number in the Value field.

4. Press the Save to accept the change.

To use the speed dial key:

Press the speed dial key to dial out the preset number.

LISTENING TO VOICE MAILS

Message waiting indicator on the idle screen indicates that one or more voicemail messages are waiting at

the message center. The power indicator LED slowly flashes red.

To listen to voice messages:

1. Press or Connect.

2. Follow the voice prompts to listen to your voicemail messages.

Note:

•

You can split the conference call into two individual calls by pressing the Split.

Quick Start Guide

Prime Business Phone – SIP-T54W

CUSTOMIZING YOUR PHONE

MANAGING CALL HISTORY

1. Press History.

2. Press or to select an entry from the list.

2. Do the following:

•Press Send to call the entry.

•Press Delete to delete the entry from the list.

•Press Option, you can do the following:

Select Detail to view detailed information about the entry.

Select Add to Contact to add the entry to the local directory.

Select Add to Blacklist to add the entry to the blacklist.

Select Delete All to delete all entries from the list.

MANAGING CONTACT DIRECTORY

Adding a contact:

1. Press Directory, and then select All Contacts.

2. Press Add to add a contact.

3. Enter a unique contact name in the Name field and contact numbers in the corresponding fields.

4. Press Save to accept the change.

Editing a contact:

1. Press Directory, and then select All Contacts.

2. Press or to select the desired contact, press the Option and then select Detail from the

prompt list.

3. Edit the contact information.

4. Press Save to accept the change.

Deleting a contact:

1. Press the Directory, and then select All Contacts.

2. Press or to select the desired contact, press the Option and then select Detail from the

prompt list.

3. Press OK when the LCD screen prompts “Delete selected item?”.

VOLUME ADJUSTMENT

•Press to adjust the volume.

SETTING RING TONES

1. Navigate to Menu->Basic->Sound->Ring Tones.

2. Press or to select Common or the desired account and then press Enter.

3. Press or to select the desired ring tone.

4. Press Save to accept the change.

Note:

•

You can add contacts from call history easily. For more information, refer to

Call History

above.

Andere Handbücher für SIP-T54W

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink T42G Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Yealink

Yealink T46S Skype for Business Gebrauchsanweisung

Yealink

Yealink W60P Telesystem Bedienungsanleitung

Yealink

Yealink CP920 Bedienungsanleitung

Yealink

Yealink T20P Installationsanleitung

Yealink

Yealink SIP-T32G Bedienungsanleitung

Yealink

Yealink T41S Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T41P Bedienungsanleitung

Yealink

Yealink W76P Bedienungsanleitung

Yealink

Yealink Verizon One Talk W60B Bedienungsanleitung

Yealink

Yealink SIP-T29G Bedienungsanleitung

Yealink

Yealink SIP-T21 E2 Bedienungsanleitung

Yealink

Yealink T18 Bedienungsanleitung

Yealink

Yealink CP860 SERIES Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink T54W Bedienungsanleitung

Yealink

Yealink SIP-T2 Series Service-Handbuch

Yealink

Yealink W76P Gebrauchsanweisung

Yealink

Yealink Yealink SIP-T22P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T26P Bedienungsanleitung

Yealink

Yealink T58A Teams Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung