Yealink Telkom W52P Bedienungsanleitung

publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, photocopying, recording, or otherwise, for any purpose, without the express written

permission of Yealink Network Technology CO., LTD. Under the law, reproducing includes

translating into another language or format.

When this publication is made available on media, Yealink Network Technology CO., LTD. gives

its consent to downloading and printing copies of the content provided in this file only for private

use but not for redistribution. No parts of this publication may be subject to alteration,

modification or commercial use. Yealink Network Technology CO., LTD. will not be liable for any

damages arising from use of an illegally modified or altered publication.

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE

SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND

RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED

WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL

RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS.

YEALINK NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink Network Technology

CO., LTD. shall not be liable for errors contained herein nor for incidental or consequential

damages in connection with the furnishing, performance, or use of this guide.

Hereby, Yealink Network Technology CO., LTD. declares that this phone is in conformity

with the essential requirements and other relevant provisions of the CE, FCC.

This device is marked with the CE mark in compliance with EC Directives 2006/95/EC and 2004/108/EC.

Any Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

This device is compliant with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

To avoid the potential effects on the environment and human health as a result of the

presence of hazardous substances in electrical and electronic equipment, end users of

electrical and electronic equipment should understand the meaning of the crossed-out

wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to

collect such WEEE separately.

We are striving to improve our documentation quality and we appreciate your feedback. Email

your opinions and comments to [email protected].

Yealink IP phone firmware contains third-party software under the GNU General Public License (GPL).

Yealink uses software under the specific terms of the GPL. Please refer to the GPL for the exact terms and

conditions of the license.

The original GPL license, source code of components licensed under GPL and used in Yealink products can

be downloaded online:

http://www.yealink.com/GPLOpenSource.aspx?BaseInfoCateId=293&NewsCateId=293&CateId=293.

About This Guide

CommPortal is Metaswitch’s subscriber interface, delivering network-based services to

subscribers. CommPortal allows subscribers manage their individual telephony services,

access to network contacts and network call list.

Subscribers can log into CommPortal via web, business phone and mobile device, etc.

This guide describes how to access the following CommPortal phone applications from

Yealink W52P phones.

Network Contacts

Network Call List

Note

Topics provided in this guide include:

Chapter 1 Configuring the CommPortal Feature

Chapter 2 Configuring CommPortal Phone Application

Chapter 3 Downloading Configuration Files

The configuration process outlined in this guide applies to Yealink W52P phones running

firmware version X.73.202.1 or later.

CommPortal Phone Applications User Guide for Yealink SIP Phones

Table of Contents

vii

About This Guide ...................................................................... v

In This Guide ......................................................................................................................... v

Table of Contents.....................................................................vii

Configuring the CommPortal Feature ...................................... 1

Configuring CommPortal Phone Applications ......................... 5

Network Contacts..................................................................................................................6

Configuring Network Contacts .........................................................................................6

Using Network Contacts Feature on the Phone .............................................................9

Network Call List................................................................................................................. 13

Configuring Network Call List........................................................................................ 13

Using Network Call List Feature on the Phone ............................................................ 14

Downloading Configuration Files .......................................... 17

Obtaining the Provisioning Server Address.................................................................... 17

Phone Flash ..................................................................................................................... 17

Configuring the Update Mode......................................................................................... 18

Power On ......................................................................................................................... 19

Auto Provision Now......................................................................................................... 19

Regulatory Notices ................................................................. 21

Service Agreements .......................................................................................................... 21

Limitations of Liability ........................................................................................................ 21

Safety Instructions .............................................................................................................. 21

CommPortal Phone Applications User Guide for Yealink SIP Phones

viii

Configuring the CommPortal Feature

CommPortal integrated with Yealink W52P phones allows subscriber to access Network

Contacts and Network Call List features quickly and easily. The system administrator

should enable the CommPortal phone application and configure the authentication

information for the users, and then users can access those features from the IP phone.

To configure the Commportal via CommPortal phone configurator:

1. Login in to the CommPortal phone configurator of the desired account (e.g.,

9702981673).

2. Click on Features->CommPortal Phone Applications.

3. Mark the Enabled radio box in the CommPortal Phone Apps Enable field.

4. Enter the CommPortal login URL (e.g., https://example.com/cp/) in the CommPortal

Web Access field.

5. (Optional.) Enter the user name (e.g., 9702981673) and password in the

CommPortal Access Username and CommPortal Access Password fields

respectively.

If the fields are left blank, users have to enter user name and password when

accessing CommPortal phone applications via their phone.

6. Click Save changes to accept the change.

7. Perform auto provisioning on the phone to download above configurations. For

more information on how to perform auto provisioning, refer to Downloading

Configuration Files on page 17.

Note

If the authentication succeeds, user can access interoperability features mentioned

above via phone user interface directly. If the LCD screen prompts the error message

when you access interoperability features mentioned above, you can take the following

Contact your system administrator for the CommPortal login URL, user name and

password.

CommPortal Phone Applications User Guide for Yealink SIP Phones

as references:

a) If the LCD screen prompts the error message as shown below:

It indicates that any of the authentication information (user

name/password/CommPortal URL) you enter is wrong. You need to re-enter the

correct authentication information.

b) If the LCD screen prompts the error message as shown below:

It indicates that CommPortal URL has been cleared from the phone flash, you need

to ask your system administrator to re-enter the CommPortal URL via the

CommPortal phone configurator.

Andere Handbücher für Telkom W52P

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink W73P Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink Yealink SIP-T26P Gebrauchsanweisung

Yealink

Yealink W56P Telesystem Bedienungsanleitung

Yealink

Yealink SIP-T31G Bedienungsanleitung

Yealink

Yealink SIP-T23G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Bedienungsanleitung

Yealink

Yealink Yealink SIP-T20P Gebrauchsanweisung

Yealink

Yealink Enterprise Bedienungsanleitung

Yealink

Yealink Yealink SIP-T42G Bedienungsanleitung

Yealink

Yealink SIP-T4X Service-Handbuch

Yealink

Yealink SIP-T48G-SFB Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Service-Handbuch

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T28P Bedienungsanleitung

Yealink

Yealink Verizon One Talk W60B Bedienungsanleitung

Yealink

Yealink Yealink SIP-T46G Gebrauchsanweisung

Yealink

Yealink T48 Bedienungsanleitung

Yealink

Yealink CP935W Bedienungsanleitung

Yealink

Yealink Elastix PBX Bedienungsanleitung

Yealink

Yealink SIP-T29G Bedienungsanleitung

Yealink

Yealink SIP-T30 Bedienungsanleitung

Yealink

Yealink W52H Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Produktinformationsblatt

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung