Yealink Verizon One Talk W60B Bedienungsanleitung

Quick Start Guide(V81.30)

DECT IP Phone

www.yealink.com For W60B firmware 77.81.0.30 or later

For W56H firmware 61.81.0.30 or later

W60B & W56H

Packaging Contents

W56H Handset

USB Charger Cradle

Power Adapter

Belt Clip

Note: We recommend that you use the accessories provided or approved by Yealink. The use

of unapproved third-party accessories may result in reduced performance.

Note: Yealink W60 DECT IP phone consists of one W60B base station and one W56H handset.

W56H Package Contents

W56H Handset W60B Base Station Base Stand USB Charger Cradle

Belt Clip

2 Power Adapters

Ethernet Cable Rechargeable Battery Quick Start Guide Handset Protective Case

(Optional)

Rechargeable Battery Quick Start Guide Handset Protective Case (Optional)

W60 Package Contents

1. Connect the base station power and the network using Method a or

Method b.

a. AC Power Option b. PoE (Power over Ethernet) Option

Note:

If you choose Method a, use Yealink supplied power adapter (5V/600mA).

A third-party power adapter may damage the base station.

If you choose Method b, you do not need to connect the power adapter.

Make sure the hub/switch is PoE-compliant.

Packaging Contents

IEEE 802.3af compliant

PoE Hub/Switch

MAC

2a. (Desktop Installation) Attach and remove the base stand.

W60B Base Station Base Stand

Power Adapter Ethernet Cable Quick Start Guide

W60B Package Contents

Assembling the DECT Phone

MAC

Attach the Base Stand Remove the Base Stand

Align the snap-fits with the corresponding holes

and push forward, snapping them into the holes.

Remove the snap-fits from the

holes horizontally.

3. Insert the battery into the handset.

4. Attach the Belt Clip.

5. (Optional) Mount the charger cradle to the wall.

36.00mm

1:1

36mm

MAC

59mm

MAC

battery

2b. (Wall-Mount Installation) Attach the base station.

6. Connect the charger cradle and charge the handset.

Shortcuts

Shortcut keys help you quickly access to frequently used phone features. Check the

default shortcut keys below:

Press the left soft key to access the call history.

Press the right soft key to check the line status.

Press to place an internal call.

Press to increase the ringer volume.

Press to access the directory.

Press to decrease the ringer volume.

Press one or more times to switch among different input modes or enter “#”.

Press to select the special characters or enter “*”.

Press a digit key one or more times to enter the desired character or digit.

Press the Del soft key to delete entered characters.

Press the Save soft key to accept the change or to cancel.

Note:

Use Yealink s

upplied

power adapter (5V/600mA). A third-party power adapter may

damage the handset.

Check the charging status on the top right corner of the LCD screen.

Entering and Editing Data

Getting Started

Network Settings

DHCP

You can configure the base station to obtain network settings in one of the following

ways:

Easy Registration:

Normal Registration:

Handset Registration

You can register up to 8 handsets to one W60B base station. Each handset can be

registered to 4 different base stations.

When the handset LCD screen prompts “Press base paging 2s then press Reg.”, long

press on the base station till the registration LED flashes. There are two methods

to register a new handset:

1.Press the OK soft key on the handset, and then select Register Handset.

2.Select the desired base station and then press the OK soft key. The handset begins

searching the base station.

3.Press the OK soft key after searching a base station successfully.

4.Enter the base station PIN (default: 0000), and then press the Done soft key to

complete registration.

1.Press the Reg soft key on the handset to register quickly.

To register to multiple base stations, press the OK to enter the main menu, and select

Settings->Registration->Register Handset, then repeat steps 2-4.

Note:

If the handset is registered to the base station successfully, the handset LCD

screen prompts “Handset Subscribed” and “Base NO.”( last 4 characters indicate

the base station’s MAC address).

If the handset LCD screen prompts “Searching for Base”, check if your base

station is powered on or not.

By default, the base station attempts to contact a DHCP server in your network to

obtain the valid network settings, e.g., IP address, subnet mask, gateway address and

DNS address.

Static

To configure the network parameters for the base station manually:

1.Press the OK key to enter the main menu, and then select Settings->System

Settings->Network (default PIN: 0000)->Basic.

3.Press to select the corresponding IP address mode.

2.Select the desired IP address mode from the IP Mode field.

4.Make the desired changes.

5.Press the Save soft key to accept the change.

Turning Handset On/Off

To turn the handset on, do one of the following:

Place the handset in the charger cradle. The handset will be turned on automatically.

To turn the handset off:

Locking/Unlocking Keypad

Silent Mode

Press , then the LCD screen lights up.

Long press to turn the handset off.

Long press when the handset is idle to switch the silent mode to On.

Long press when the handset is idle to lock the keypad.

Long press again to switch the silent mode to Off.

Long press again to unlock the keypad.

Note:

The IP DECT phone supports either or both IPv4 and IPv6 addresses modes, but IPv6

is disabled by default.

Wrong network settings may result in inaccessibility of your DECT phone may affect

the network performance. Contact your system administrator for the network

parameters.

Basic Operations

If the base station cannot contact a DHCP server for any reason, you need to configure

the IP address, subnet mask, gateway address, primary DNS address and secondary

DNS address for the base station manually.

Handset Name

1.Press the OK key to enter the main menu, and then select Settings->Handset Name

3.Press the Save soft key to accept the change.

Ring Tones

4.Press the Save soft key to accept the change.

Local Directory

To add a contact:

1.Press the OK key to enter the main menu, and then select Directory.

3.Enter the desired value in the Name, Number, Mobile and Extension field

respectively.

2.Press the Options soft key, and then select New Contact.

4.Press the Save soft key to accept the change.

To edit a contact:

1.Press the OK key to enter the main menu, and then select Directory.

Press or when the handset is idle or ringing to adjust the ringer volume.

Volume Adjustment

Press or during a call to adjust the receiver volume of speakerphone/earpiece

/earphone.

3.Press or to select the desired ring tone.

2.Press or to highlight the desired entry.

To rename the handset:

3.Press the Options soft key, and then select Edit.

4.Edit the value in the Name, Number, Mobile and Extension field respectively.

5.Press the Save soft key to accept the change.

To delete a contact:

1.Press the OK key to enter the main menu, and then select Directory.

3.Press the Options soft key, and then select Delete to delete the selected entry.

2.Press or to highlight the desired entry.

2.Press or to highlight the Intercom Call option or the desired line.

2.Edit the value in the Rename field.

1.Press the OK key to enter the main menu, and then select Settings->Audio->Ring

Tones->Melodies.

Handset Settings

Placing Calls

To place a call from the local directory:

To place a call from the call history:

To assign a speed dial number:

1.Press the History soft key when the handset is idle, and then select the desired call

history list.

To place a call directly:

1.Press when the handset is idle.

Enter the desired number when the handset is idle.

2.Press or to highlight the desired entry, and then press or to dial out

using the default line.

To place a call from the redial list:

1.Press when the handset is idle.

2.Press or to highlight the desired entry, and then press or .

If multiple numbers for the contact are stored, press or to highlight the desired

number, and then press or again to dial out using the default line.

2.Press or to highlight the desired entry, and then press or to dial out

using the default line.

1.Press the OK key to enter the main menu, and then select Settings->Telephony->

Speed Dial.

2.Press or to highlight the desired digit key, and then press the Assign soft key.

3.Press or to highlight the desired entry, and then press the OK soft key.

If both the office number and mobile number are stored, press or to highlight

the desired number, and then press the OK soft key again.

Press to enter the pre-dialing screen.

Enter the desired number using the keypad.

If there are multiple lines assigned to your handset as outgoing lines, press the Line

soft key to select the desired line. If you do not select a line, the handset uses the

default outgoing line to dial out.

2.Press , or to dial out.

1.Do one of the following:

Basic Call Features

To place a call using the speed dial key:

Long press the speed dial key to call the preset number directly.

Answering Calls

To answer a call, do one of the following:

Press the Accept soft key.

Ending Calls

Press .

Call Hold and Resume

To place a call on hold:

To resume a call, do one of the following:

If there is only a call on hold, press the Resume soft key.

Press the Options soft key during a call, and then select Hold.

If there are two calls on hold, press the Resume soft key to resume the current call.

Press the Swap soft key to swap between calls.

Blind Transfer

Call Transfer

You can transfer a call in the following ways:

1.Press the Options soft key during a call, and then select Transfer.

Call Mute

Press again to un-mute the call.

Press during a call to mute the call.

Press .

Note:

You can ignore an incoming call by pressing the Silence soft key or reject an incoming

call by pressing .

3.Press the Transfer soft key.

2.Enter the number you want to transfer the call to.

Andere Handbücher für Verizon One Talk W60B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Yealink IP-Telefon Handbücher

Yealink

Yealink VP59 Teams Bedienungsanleitung

Yealink

Yealink VP530 Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink SIP-T27P Bedienungsanleitung

Yealink

Yealink T53W Bedienungsanleitung

Yealink

Yealink SIP-T32G Gebrauchsanweisung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink SIP-T29G Bedienungsanleitung

Yealink

Yealink Telkom W52P Kurzanleitung

Yealink

Yealink SIP-T38G Bedienungsanleitung

Yealink

Yealink T42 Bedienungsanleitung

Yealink

Yealink SIP-T38G Bedienungsanleitung

Yealink

Yealink SIP-T40P Bedienungsanleitung

Yealink

Yealink Yealink SIP-T21P Bedienungsanleitung

Yealink

Yealink Telkom W52P Bedienungsanleitung

Yealink

Yealink T46G Skype For Business Edition Bedienungsanleitung

Yealink

Yealink SIP-T32G Bedienungsanleitung

Yealink

Yealink T58A Teams Bedienungsanleitung

Yealink

Yealink T53 Gebrauchsanweisung

Yealink

Yealink Yealink SIP-T42G Gebrauchsanweisung

Yealink

Yealink T58A Teams Service-Handbuch

Yealink

Yealink T42 Bedienungsanleitung

Yealink

Yealink SIP-T52S Bedienungsanleitung

Yealink

Yealink SIP-T28 Bedienungsanleitung

Beliebte IP-Telefon Handbücher anderer Marken

Alcatel

Alcatel 4028 Bedienungsanleitung

Polycom

Polycom Polycom VVX 600 Bedienungsanleitung

Polycom

Polycom SoundPoint IP 450 Bedienungsanleitung

Cisco

Cisco SPA-500 Series Bedienungsanleitung

Polycom

Polycom SoundPoint IP 650 Bedienungsanleitung

Proximus

Proximus Maestro 3016 IP Bedienungsanleitung

Fanvil

Fanvil X4 Bedienungsanleitung

Cisco

Cisco 7962 Bedienungsanleitung

Snom

Snom 320 Bedienungsanleitung

Avaya

Avaya 4625SW Bedienungsanleitung

Nortel

Nortel 1140E Bedienungsanleitung

Nexotek

Nexotek NT-P500 Bedienungsanleitung

Avaya

Avaya Integral 5 R3.0 Bedienungsanleitung

GE 28320EE2 - Dect 6.0 InfoLink 2 Bedienungsanleitung

Avaya

Avaya 4600 Series Service-Handbuch

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Bedienungsanleitung

Nortel

Nortel i2050 Bedienungsanleitung

Fiberme

Fiberme FAP260 Series Bedienungsanleitung