Yeastar Technology S100 Bedienungsanleitung

Yeastar S100 VoIP PBX

Installation Guide

Version 1.0

Jun. 2016

Yeastar S100 Installation Guide

2/15

Content

Welcome……………………………………………………………………………………………………...3

Before You Start……………………………………………………………………………………………..4

Package Contents………………………………………………………………………………………….4

Expansion Board……………………………………………………………………………………………4

Yeastar S100 Overview…………………………………………………………………………………....5

LED Indicators and Ports…………………………………………………………………………………..6

Installation………………………………………………………………………………………………….....8

Safety Disclaimers and Installation Warnings……………………………………………………………8

Telephony Module Installation……………………………………………………………………………..8

DSP Module Installation…………………………………………………………………………………..11

Desktop Installation……………………………………………………………………………………….12

Rack Installation…………………………………………………………………………………………...12

Frame Ground Connection……………………………………………………………………………… 13

Connecting the Equipment……………………………………………………………………………….14

Getting Started with the Configuration…………………………………………………………………15

Yeastar S100 Installation Guide

3/15

Welcome

Thank you for choosing Yeastar S100 IP PBX. S100 is a cost-effective business communication

system with a base configuration of 100 users and 30 concurrent calls and can scale up to 200 users

and 60 concurrent calls. The flexible S100 comes with support for analog ports, ISDN BRI,

E1/T1/PRI, and GSM networks.

This guide describes how to install the S100 and how to log in the web GUI to configure the system.

Once you complete the installation, refer to the Yeastar S-Series Administrator Guide for instructions

on how to perform configurations on the system.

Related Documents

This Installation Guide only explains the installation of Yeastar S100 IPPBX. For more functionality

and advanced settings, please refer to the relative documents as below:

Document

Description

Yeastar S-Series Datasheet

Datasheet for the Yeastar S-Series IPPBX.

Yeastar S-Series Administrator Guide

The administrator could refer to this manual for

instructions on how to configure, operate, monitor,

and maintain the Yeastar S100 IPPBX.

Yeastar S-Series Extension User Guide

Users could refer to the guide for instructions on how

to login the user portal, and how to configure their

accounts, listen to call recordings, check voicemail

messages, etc.

Yeastar S100 Installation Guide

4/15

Before You Start

Before you begin to install the S100 IP Phone System, please check the package contents to verify

that you have received the items below. If there is any problem, please contact your provider.

Package Contents

1* S100 PBX

1* Ethernet Cable

1* Power Cord

2 Rack Mounting Kits

1* Grounding Stud & Nut

4* Rubber Feet

1* Warranty card

1* Quick Start Guide

Expansion Board

Yeastar S100 supports expanding up to 2 Expansion boards and supports expanding one DSP

module.

Expansion Board –EX08

EX08 board supports up to 4 modules (8 ports).

Optional Module

O2 Module

S2 Module

B2 Module

GSM Module

3G Module

CDMA Module

Yeastar S100 Installation Guide

5/15

Expansion Board –EX30

EX30 board supports 1 E1/T1 port.

D30 Module

D30 is a DSP module, used to expand the capacity of PBX. With per D30 module added, the

extensions increase 100 and concurrent calls increase 30 in additional.

Yeastar S100 Overview

Front Panel (1*EX08 + 1*EX30)

Yeastar S100 Installation Guide

6/15

Back Panel

LED Indicators and Ports

LED Indicators

LED

Indication

Status

Description

POWER

Power status

The power is switched on

Off

The power is switched off

System

System status

Blinking

The system is running properly

Static/Off

The system goes wrong

WAN

WAN status

Blinking

Stable WAN port connection.

Off

No WAN port connection.

LAN

LAN status

Blinking

Stable LAN port connection.

Off

No LAN port connection.

Port Status

FXS

Green light

Static: The port is idle.

Blinking: There is an ongoing call on the port.

GSM/CDMA/3G

Red light

Static: the trunk is idle.

Blinking slowly: there is no SIM card inserted.

Blinking rapidly: the trunk is in use.

BRI

Orange light

Blinking slowly: the BRI line is

disconnected.

Static: the BRI line is connected or in use.

FXO

Red light

Blinking slowly: no PSTN line is

connected

to the port.

Static: the PSTN line is idle.

Blinking rapidly: the PSTN line is busy.

Antenna Sockets

SD Slot Console Power Switch

Power LAN Power Inlet

System WAN Protective Earth

Reset USB Slot

Yeastar S100 Installation Guide

7/15

Port Description

Ports

Description

RJ11 Port

FXO port (red light): for the connection of PSTN lines or FXS ports of traditional

PBX.

FXS port (green light): for the connection of analog phones.

BRI port (orange light): for the connection of ISDN BRI lines.

Note: the sequence number of the ports corresponds to that of the Indicator

lights in the front panel. (I.e. the LED lights in the front indicate the connection

status of the corresponding ports at the front panel.)

E1/T1 Port

Connect the E1/T1 line.

ANT

Rotate the antenna into the Antenna Socket.

USB Slot

Connect a USB drive or mobile hard disk drive.

SD Slot

Insert a SD card.

Ethernet Port

Yeastar S100 supports two 10/100/1000M Ethernet ports.

LAN port: LAN port is for the connection to Local Area Network (LAN).

WAN port: WAN port is the network port for the connection to internet. It

supports „DHCP server‟, „PPPoE/dynamic DNS‟, and “static IP” for IP

address assignment.

Reset Button

Press and hold for 10 seconds to restore the factory defaults.

Power Inlet

Connect the supplied power supply to the port.

Power Switch

Switch on or off the device.

Yeastar S100 Installation Guide

8/15

Installation

This chapter shows you how to install Yeastar S100 IP phone system.

Safety Disclaimers and Installation Warnings

To avoid unexpected accident, personal injury or device damage, please read the safety disclaimers

and installation warnings.

Power

Use only the power adapter provided with the IP PBX.

Keep the power off during the installation.

Make sure that the supply voltage matches the specifications indicated on the back panel of the

device.

To avoid the electric accident, do not open or remove the cover of IP PBX when it is working as

well as off the power.

Before cleaning the device, cut off the power supply.

Environment

Install the Yeastar S100 IP PBX in a location that is clean, free from vibration, electric shock, and

temperature/humidity extremes. The operating temperature should be kept below 104°F (40°C).

Telephony Module Installation

STEP 1 Loosen the screws on the enclosure and then remove the upper cover.

Yeastar S100 Installation Guide

9/15

STEP 2 Push out the empty board from the inside of the device.

STEP 3 Push in the Expansion Board (EX08 or EX30).

STEP 4 Lock the screws to fix the Expansion Board.

Yeastar S100 Installation Guide

10/15

STEP 5 Insert the Telephony Modules on the EX08 Board. Skip this step for EX30 Board.

STEP 6 Insert a SIM card on the GSM/CDMA/3G module following the instructions. Skip this step if

no GSM/CDMA/3G module installed.

STEP 7 Fix the screws and close the cover.

Inhaltsverzeichnis

Andere Yeastar Technology Telefonanlage Handbücher

Yeastar Technology

Yeastar Technology MyPBX U300 Bedienungsanleitung

Yeastar Technology

Yeastar Technology S-Series Service-Handbuch

Yeastar Technology

Yeastar Technology S-Series Service-Handbuch

Yeastar Technology

Yeastar Technology S20 Bedienungsanleitung

Yeastar Technology

Yeastar Technology K2 VoIP PBX Handbuch

Yeastar Technology

Yeastar Technology MyPBX-SOHO Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX-SOHO Bedienungsanleitung

Yeastar Technology

Yeastar Technology S300 Bedienungsanleitung

Yeastar Technology

Yeastar Technology S50 Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX U200 Service-Handbuch

Yeastar Technology

Yeastar Technology MyPBX U300 Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX Standard Service-Handbuch

Yeastar Technology

Yeastar Technology S50 Bedienungsanleitung

Yeastar Technology

Yeastar Technology S20 Service-Handbuch

Yeastar Technology

Yeastar Technology MyPBX U520 Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX U100 Bedienungsanleitung

Yeastar Technology

Yeastar Technology P Series Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX-SOHO Service-Handbuch

Yeastar Technology

Yeastar Technology MyPBX Enterprise Bedienungsanleitung

Yeastar Technology

Yeastar Technology MyPBX Bedienungsanleitung

Yeastar Technology

Yeastar Technology N412 Gebrauchs- und Pflegehandbuch

Yeastar Technology

Yeastar Technology MyPBX Standard Bedienungsanleitung

Yeastar Technology

Yeastar Technology N412 Bedienungsanleitung

Yeastar Technology

Yeastar Technology S-Series Bedienungsanleitung

Beliebte Telefonanlage Handbücher anderer Marken

Allo.com

Allo.com Nano 2 Bedienungsanleitung

ZYCOD

ZYCOD ZX50 Bedienungsanleitung

Panasonic

Panasonic KX-TDA100BX Bedienungsanleitung

LV switch

LV switch IPPBX800 Gebrauchsanweisung

Edge-Core

Edge-Core VST3305 Bedienungsanleitung

Panasonic

Panasonic KX-T7625 - Digital Proprietary Speakerphone 24... Bedienungsanleitung

Rauland-Borg

Rauland-Borg Telecenter IV Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6208 Bedienungsanleitung

ATCOM

ATCOM IPPBX IP02 Bedienungsanleitung

Panasonic

Panasonic KX-TVS50 - 2 Port Voicemail System Bedienungsanleitung

bintec elmeg

bintec elmeg elmeg hybird 600 Bedienungsanleitung

Panasonic

Panasonic KX-NS300 Bedienungsanleitung

MCK

MCK EXTender PBXgateway Bedienungsanleitung

Panasonic

Panasonic KX-NS300CN Betriebsanleitung

NEC

NEC SL1000 Bedienungsanleitung

Epygi

Epygi Quadro Quadro 2xi Bedienungsanleitung

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Bedienungsanleitung

AGFEO

AGFEO AC 14 analog Bedienungsanleitung