Yeaster N720 DECT IP Multicell System Bedienungsanleitung
Gigaset IP Phone Configuration
Guide
Version 1.0
Date: November 9, 2015
Yeastar Information Technology Co. Ltd.
Gigaset IP Phone Configuration Guide
2/22
Contents
INTRODUCTION.....................................................................................................................................3
FOR N720 DECT IP MULTICELL SYSTEM.......................................................................................4
Environment.........................................................................................................................................4
Common Scenario.............................................................................................................................. 4
Configuration Steps............................................................................................................................ 5
1. Connecting the N720 IP PRO base station............................................................................5
2. Configuring VoIP Providers.......................................................................................................5
3. Filling the account information................................................................................................. 6
4. Registering the Gigaset handsets........................................................................................... 8
5. Checking registration and test..................................................................................................9
FOR N510 IP PRO............................................................................................................................... 10
Environment.......................................................................................................................................10
Configuration Steps.......................................................................................................................... 10
1. Connecting the N510 IP PRO base station......................................................................... 10
2. Configuring the IP Connection............................................................................................... 10
3. Configuring Codecs for the IP connection........................................................................... 12
4. Registering the Gigaset handset........................................................................................... 13
5. Assigning number for the handset.........................................................................................14
6. Configuring mailbox for handset............................................................................................ 15
7. Making a test call with the handset....................................................................................... 16
FOR MAXWELL 10.............................................................................................................................. 17
Environment.......................................................................................................................................17
Configuration Steps.......................................................................................................................... 17
1. Connecting the Maxwell 10.................................................................................................... 17
2. Configuring the call control..................................................................................................... 17
3. Configuring the VoIP Connection.......................................................................................... 18
4. Configuring the Codecs...........................................................................................................20
5. Configuring the mailbox for Maxwell 10............................................................................... 21
6. Making a test call from Maxwell 10....................................................................................... 22
Gigaset IP Phone Configuration Guide
3/22
Introduction
This guide shows you how to manually configure the Gigaset IP Phones with MyPBX.
It has been tested with the latest firmware version supported by MyPBX firmware
version X.19.0.47.
Including Models:
N720 DECT IP Multicell System
N510 IP PRO
Maxwell 10
Gigaset IP Phone Configuration Guide
4/22
For N720 DECT IP Multicell System
Configuring N720 DECT IP Multicell System with MyPBX.
Environment
This configuration guide is based on the following versions:
N720 DM PRO DECT Manger: 70.095.00.000.00
N720 IP PRO base station: 71.095.00.000.00
Gigaset IP DECT phone S650H PRO: 25
MyPBX: X.19.0.47
Common Scenario
Basically, the N720 DM PRO is used for managing the base station and the Gigaset
handsets. The N720 IP PRO base station provides the wireless connection for the
Gigaset handsets. Gigaset handsets register to MyPBX via the DECT manager and
base. Here is the common application scenario for N720 DECT IP Multicell System
with MyPBX:
Figure - Common Scenario
Gigaset IP Phone Configuration Guide
5/22
Configuration Steps
1. Connecting the N720 IP PRO base station
Login the web interface of N720 DECT Manger, and register the N720 IP PRO base
station by following its user manual. Then you could configure the base station, like
assigning a static IP or other else.
Figure - Base Stations Status
2. Configuring VoIP Providers
Go to the VoIP Providers menu and configure the VoIP provider. Select one VoIP
provider and filling in the information of MyPBX. Usually you can keep the default
settings except for the 4 fields:
Domain, Proxy server address, Registration server, Registration server port.
In the first 3 fields you can fill the IP address of MyPBX like the following figure shows.
For the port, you can fill in the SIP server port of MyPBX, usually it is 5060. For other
fields, you need to modify or fill as required.
Gigaset IP Phone Configuration Guide
6/22
Figure - VoIP Provider Profile
3. Filling the account information
Go to Mobile Devices menu, then add a mobile device profile. In the profile edit page
of the mobile device, generally you need to fill in the account information of an
extension from MyPBX (login MyPBX web interface to get the extension credentials).
Gigaset IP Phone Configuration Guide
7/22
Figure - MyPBX Extension Edit Page
Figure - Personal Provider Data Section
In addition, in the advanced settings, you can configure the codecs. Usually you can
keep the default settings.
Gigaset IP Phone Configuration Guide
8/22
Figure - Settings for Codecs
4. Registering the Gigaset handsets
After filling the information, click the “Start registration”. Then it will jump to another
page showing the handset registration information. On the handset, please open the
registration dialog or registration menu (Settings>Registration>Register Handset) and
fill the PIN code which displays on the web interface within the limited time it remains.
Note: for the operation of handset, the precondition is that this handset should
connect the one of the base stations which the DECT manager registers. For more
details, you can refer to the handset’s user manual.
Figure - Handset Registration Page on Web Interface
Gigaset IP Phone Configuration Guide
9/22
Figure - Registration Dialog on Handset
5. Checking registration and test
Finally check the status of the mobile device to check if you can register successfully
and make a test call. On the handset, you will see the extension number on the main
interface.
Figure - Mobile Devices Registration Status
Gigaset IP Phone Configuration Guide
10/22
For N510 IP PRO
Configuring N510 IP PRO with MyPBX.
Environment
This configuration guide is based on the following versions:
N510 IP PRO: 42.199.00.000.00
Gigaset IP DECT phone S650H PRO: 25
MyPBX: X.19.0.47
Configuration Steps
1. Connecting the N510 IP PRO base station
Connect to the N510 IP PRO base station on the Gigaset handset first, then assign a
static IP which is in the same IP segment with MyPBX for the base station on the
handset menu (System>Local Networks). After that log in the web interface of N510
IP PRO base station.
Figure - Address Assignment
2. Configuring the IP Connection
Go to the menu (Telephony>IP Connection), select one of the connections as
required.
Then fill in the information of MyPBX. In the Personal Provider Data section, you need
to fill the account information of an extension from MyPBX (log in MyPBX web
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Yeaster IP-Telefon Handbücher
