Yenkee YMS 3000 Bedienungsanleitung
EN Programmable Gaming RGB Mouse
CZ Programovatelná herní myš RGB
SK Programovateľná herná myš RGB
PL Programowalna mysz do gier RGB
YMS 3000
HU Programozható RGB gamer egér
RS Programabilan RGB miš za igranje
HR Programibilni RGB miš za igrače
ΕΛ Προγραμματιζόμενο ποντίκι Gaming RGB
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
1 2
3
6
4
57
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
Left button
Right button
Wheel
Front side button (navigate forward)
Rear side button (navigate backward)
Top button (DPI)
Poling rate: 125/500/1000Hz
Download the program
Wait for the download to finish and open
the file.
Double-click the executable .exe file to
start the installer.
1
2
3
4
5
6
7
1
2
3
4
5
USER´S MANUAL
EN
Connect the mouse to the USB port on your
computer using the USB connector.
Wait until your OS detects the mouse and
automatically install the necessary drivers
for proper functionality.
After your operating system displays
a message confirming successful insta-
llation, you can use the mouse freely
To use all mouse functions, download the control program from the official website
www.yenkee.eu. You can find it under the product of the same name in the Specifications
Follow the on-screen instructions to
complete the installation.
Run the program.
You can customize your mouse exactly to your taste in the user environment now. Your can
reprogram the mouse buttons in the start-up screen. You can select from standard office
functions via multimedia functions up to purely gaming tricks and complex macros. There is
also the option to select DPI on a scale of 100 to 12,000 DPI with 100 DPI steps and save up
to 7 different DPI levels in the mouse to be selected by pressing 6 as standard (see picture on
the manual’s introductory page). The third section is used to select the backlighting and if you
wish to upload a powerful macro to your taste, just click the last section of the same name
offered by the SW. And if are not comfortable with the mouse sensor behaviour, check out the
last but one Parameter/Performance section.
Mouse button shortcuts:
BROWSING PROFILES: Buttons 1 + 2 + 5 (hold for 3 seconds). The currently switched pro-
file flashes 3 times with a specific color, then the mouse returns to the backlight mode
you selected.
1.1. Profile 1 (red indication)
1.2. Profile 2 (green indication)
1.3. Profile 3 (blue indication)
1.4. Profile 4 (yellow indication)
1.5. Profile 5 (purple indication)
FACTORY DEFAULT: Buttons 3 + 4 + 5 (hold for 3 seconds). Flashes 3 times in red.
1
2
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
WORKING WITH THE USER INTERFACE
User environment
The control program is very intuitive and the element layout puts everything at your fingertips.
Thus, you can alter the mouse exactly to your taste.
Key assignment
The start-up screen contains a list of all keys offered by the mouse. Any button can be assig-
ned other function than it has in the default layout. Just click the required button and select
the function you like the most from the pop-up menu. In addition to the standard function,
there is also the Fire Key/SHOOTING feature allowing the mouse to use the primary button
for a multiple click according to your choice (up to 255 times). There is also a key combi-
nation, selection of recorded macros and the Aim Key/SNIPER function. With this function,
you can select DPI by holding down the button until the DPI reaches the required value. Thus,
the function is suitable for sniping, for example, when the mouse may be too sensitive. And
multimedia features to control music and browser and functions to facilitate office work are
a matter-of-course.
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
DPI
As the section name suggests, this is where you can adjust the DPI values. Just select a value
(in 100DPI steps) to your taste on the slider on a scale of 100 to 12,000 DPI. There are 7 levels
in total and it’s up to you how many levels from the menu will be stored in your mouse. Just
select the relevant checkbox and switch between the levels by pressing 6 (see the manual
introductory picture).
There is also a special function for players who use the resolution that extends the picture to
improve visibility. This is called Adjust X/Y axis independently and can be found on the bottom
of this section. This means that the vertical mouse movement will use a different sensitivity
than the horizontal movement.
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
Backlighting
Set the mouse backlighting in the LED/Backlighting section easily. Just select a required
effect from the menu to be applied automatically to the mouse. In addition to the effect, you
can also set the mouse brightness and with some effects, also the running speed or even the
backlight colour in a full RGB scale. And this also applies to complex effects where you can
set multiple colours separately at one time. The choice is up to you, imagination is not limited!
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
Power output
The last but one Parameter/Performance section is designed to set up the sensor.
As these are mostly system settings, the changes made here will take effect in the operating
system. If you change the mouse that may become unfit mainly because of the sensor, you
must first reset the mouses set in the OS.
The first slider allows you to change the sensitivity with the option to increase the sensor
precision. The basic value is 10.
There is also the wheel scrolling speed setting with the option to skip the whole screen while
scrolling.
The third slider is used to change the double-click speed.
The last slider controls the so called Lift Off Distance. The mouse is equipped with an advan-
ced gaming sensor, being able to record motion even when lifted.
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
Macro
The last section offered by the SW is the macro editor. It allows you to record a set of keys in
the mouse to create some function together. And the recorded keystrokes will then be execu-
ted exactly in the entered order. And you can do with just one button in which you record your
macro then in the first section.
To create a new macro, right-click the lighter box named Macro list and select the required
action. Name your macro and start recording by pressing the Start record button in the right
corner. Perform a keystroke sequence and to stop the recording, press the same button, now
named Stop record. In the Key list, you can find the keystroke sequence performed within
your macro including the responses. Both parameters can be modified, deleted or inserted
as new. Again, just right-click and select the required function.
Furthermore, the macro editor offers you a constant macro editing in the delay section. On
the right of the window, there are several options that are simply applied globally by clicking.
After the selection, recording is started with already applied function.
To save your macro then, press Save.
Copyright © 2020, Fast ČR, a.s. Revision 08/2020
If you wish to save your macros, you can export them from the program as well as import
to use your already saved macros. Right-click the macro name and select Export in the first
list. If you wish to record your macro to software, right-click the free space in the first list and
select Import.
Profiles
And finally, you can save all your mouse settings to individual profiles. If you use your mouse
in more games with your specific function map, you can save them in different profiles and
select also a different - correct profile in case of a game change. The bottom side of the pro-
gram is designed for this purpose with up to five profiles on the left for you to choose from.
And just like in the macro editor, you can save your profiles to PC and upload them as well. Just
install software on another device then and upload a required profile from a portable device.
The button with three dots to the right of the profile selection is designed for this purpose.
Inhaltsverzeichnis
Sprachen:
Andere Yenkee Maus Handbücher
Yenkee
Yenkee HORNET YMS 3009 Bedienungsanleitung
Yenkee
Yenkee YMS 3028 Bedienungsanleitung
Yenkee
Yenkee AMBUSH YMS 3017 Bedienungsanleitung
Yenkee
Yenkee YMS 3027 Bedienungsanleitung
Yenkee
Yenkee Hornet YMS 3029 Bedienungsanleitung
Yenkee
Yenkee YMS 3400 Bedienungsanleitung
Yenkee
Yenkee YMS 3001 Bedienungsanleitung
