I. Product Features
1. Closed loop sensor and microcomputer P ID control make sure precise tempera-
ture. LCD digital display working status of air gun/iron, button switch the gun and
iron display is easy and visual to operate.
2. Hot air gun with bigger power that rapid temperature rising. Airflow soft and
wide, very suitable for lead-free soldering rework.
3. The heating element adopts low voltage power supply, can safely and effectively
protect sensitive components and staff.
4. Perfect in gun and iron combination, the machine using ferroalloy cabinet, com-
pact body occupied small area of table.
5. With self detection and fault alarm function.
Upgrade Version
1. Upgrade Version with all the advantages of Standard Version, and add the air
gun manual/automatic switching function. Toggle switch is convenient and fast.
2. Automatic mode:
Put the gun on the holder that air gun will be down temperature into a standby
state. This model is suitable for not often soldering situation, can effectively save
energy and reduce the loss(host, heater etc.), good for prolong the service life.
3. Manual mode:
Put the gun on the holder, the gun remain current operating temperature. This
mode is very suitable for often soldering situation, can save time of gun repeate-
dly back to the temperature, improve the efficiency of soldering.
4. Iron sleep function:
Can be automatic detection of the working state,the absence of people into sleep
function. Factory preset the iron sleep time ( 10 minutes ), soldering iron temper-
ature automatic cooling to 200°C and then sleep. Can effectively prevent the
oxidation of the soldering iron tips and prolong the service life,energy saving and
environmental protection.
9 10
Use the machine, the following basic measures should abide, avoid electric shock or
cause injury or damage caused by fires.
1. To ensure personal safety, after the machine completed work, please turn
off the main power switch, and unplug the power cord if long time no use.
2. To ensure personal safety, you must use the original approval or
recommendation of the parts, otherwise it will lead to serious consequences.
3. Machine failure must be by professionals or the company designated personnel
for repair.
4. This product is grounded three-wire plug, must be inserted within the three hole
grounded outlet, do not change the plugs or use ungrounded three adapter made
it bad grounded.
5. Hot air gun or soldering station is open, its temperature are likely to reach 400 . °C
Do not use it near flammable gas, objects. Tube and the heat emitted very hot,
can burn the body, do not touch the hot pipe and direct injection to heat the
human body.
6. Before hot air gun turned on, please ensure it is in safety environment, do not
leave the jobs site.
7. When the hot air gun opening do not install nozzle, the heat pipe and the nozzle
must be cooling. Then installed the other nozzle.
8. Please keep inlet and outlet air flow, don’t have obstruction.
9. After used, remember that the cooling body, the handle should be released
into the handle frame, then shut down the machine to sleep.
10. Do not use a soldering iron to weld outside the work; Do not iron percussion table
to clear the residual flux, this could seriously damage the iron.
11. The machine welding will take smoke, please do proper ventilation.
1. If the supply cord is damaged, it must be replaced by a special cord or assemble
available from the manufacturer or its service agent.
2. WARNING: This tool must be placed on its stand when not in use.
3. Be careful when using the appliance in places where there are combustible
materials; Do not apply to the same place for a long time.
4. Be aware that heat may be conducted to combustible materials that are out of
sight; Do not leave the appliance unattended when it is switched on.
5. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge. Unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.
Warning!!!
Safety Rules
Standard Version
