YOKOGAWA UTAdvanced UT32A Handbuch

Setup Procedure

UTAdvanced Quick Setting

(Controlling Tank Temperature)

TI 04L01L01-08EN

Foreword

The contents of this document are subject to change without prior notice as a result of improvements in performance or functionality.

Copying or reproduction by any means of all or any part of the contents of this document without permission is strictly prohibited.

Use of this document is at the users risk.

Technical

Information

This document is subject to change without notice. TI04L01L01-08EN

2011.12.16 1st Edition (YK)

■Overview

This is an example of wiring and settings using the UTAdvanced Quick Setting function for "tank

temperature control." For more details, see the user's manual.

■Relevant models

Heating/cooling models of the UT32A, UT35A, UT52A, and UT55A

■System

■Wiring

Power

supply

PV b

RTD (Pt100) applicable

standard: RTD (ITS-90:

JIS '97)

Solenoid valve,

heater side

Solenoid valve,

refri

erator

For the UT32A, UT35A, and UT52A

Power

supply

PV b

RTD (Pt100) applicable

standard: RTD (ITS-90:

JIS '97)

Solenoid valve,

heater side

Solenoid valve,

refri

erator side

For the UT55A

～

Hot

Cold

Pt100 0

–

100℃

Time-proportional PID relay control output

Cycle time

2/3

This document is subject to change without notice. TI 04L01L01-08EN 2011.12.16-00

■Settings

To set heating/cooling control, input signal (Pt100 range 0.0 to 100.0°C), and time proportional control

output (relay output), set the following parameters.

(1) Select the desired parameter with the UP or DOWN key

(2) Press SET/ENTER (the setting value blinks)

(3) Change the setting with the UP or DOWN key

(4) Press SET/ENTER to set the new value (the setting value stops blinking but

remains bright)

●Redoing the Quick Setting

Once functions are configured with the Quick Setting, the Quick Setting function

will not appear after you restart. However, you can redo the Quick Setting by

following the procedure below.

(1) Set the Quick Setting parameter QSM to ON, and re-engage power

(2) Set the PV input type parameter IN to OFF, and re-engage power

Press SET/ENTER to accept the "YES" option.

Quick Setting starts

First, the control type parameter CNT appears.

Set CNT (control type) to H/C (initial value).

OFF is displayed for IN (the PV input type).

Set IN (PV input type) to RTD: Pt1.

(Pt1 applicable standard: RTD (ITS-90: JIS'97 -200 to 850°C))

Set UNIT (PV input unit) to :C (initial value).

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔH/C

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN Pt1

PV INPUT UNIT

UNIｔC

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔH/C

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN Pt1

PV INPUT UNIT

UNIｔC

Power

Quick Setting

start

3/3

This document is subject to change without notice. TI 04L01L01-08EN 2011.12.16-00

Set RH (maximum value of PV input range) to = 100.00°C.

Set RL (minimum value of PV input range) to 0.0°C (the initial value).

Set OT (output type selection) to 06 03 (initial value).

06: OUT2 terminal: Select cooling side relay output

03: OUT terminal: Select heating side relay output

Set heating side cycle time CT=30 seconds (initial value)

Tuning may be necessary under certain conditions.

Set cooling side cycle time CTc=30 seconds (initial value)

Tuning may be necessary under certain conditions.

Finally, EXIT is displayed. Select YES and press SET/ENTER to complete the

basic function setup and return to the operating screen. Or, you can select NO

to continue with the Quick Setting.

Revision Information

Document name: Setup Procedure: UTAdvanced Quick Setting (Controlling Tank Temperature)

Document number: TI 04L01L01-08EN

First edition: December, 2011

Newly released

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 100.0

11. FINISH

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 0.0

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ06.03

Cooling-side control

output cycle time

10.

Cｔｃ 30.0

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 100.0

11. FINISH

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 0.0

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

OUTPUT TYPE

SELECTION

0ｔ06.03

Cooling-side control

output cycle time

10.

Cｔｃ 30.0

Andere Handbücher für UTAdvanced UT32A

Dieses Handbuch passt für folgende Modelle

Andere YOKOGAWA Controller Handbücher

YOKOGAWA

YOKOGAWA YS1000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA UP750 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UP350 Bedienungsanleitung

YOKOGAWA

YOKOGAWA YS170 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UP150 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT35A/RSP Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT321 Bedienungsanleitung

YOKOGAWA

YOKOGAWA Revolution FA-M3 R Handbuch

YOKOGAWA

YOKOGAWA CX1000 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UTAdvanced UT52A Bedienungsanleitung

YOKOGAWA

YOKOGAWA ProSafe-RS Handbuch

YOKOGAWA

YOKOGAWA UT52A/MDL series Bedienungsanleitung

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Installations- und Betriebshandbuch

YOKOGAWA

YOKOGAWA Vitesse FA-M3V Bedienungsanleitung

YOKOGAWA

YOKOGAWA TC 10-L Installations- und Betriebshandbuch

YOKOGAWA

YOKOGAWA UT150L Bedienungsanleitung

YOKOGAWA

YOKOGAWA TC 10-L Bedienungsanleitung

YOKOGAWA

YOKOGAWA CX1000 Leitfaden

YOKOGAWA

YOKOGAWA UP35A Bedienungsanleitung

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Betriebsanleitung

YOKOGAWA

YOKOGAWA UT75A Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT32A-R Bedienungsanleitung

YOKOGAWA

YOKOGAWA UM33A Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT35A/MDL Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung