YOKOGAWA UTAdvanced UT32A Handbuch

Setup Procedure

UTAdvanced Quick Setting

(Controlling Furnace Temperature with a Thyristor)

TI 04L01L01-02EN

Foreword

The contents of this document are subject to change without prior notice as a result of improvements in performance or functionality.

Copying or reproduction by any means of all or any part of the contents of this document without permission is strictly prohibited.

Use of this document is at the users risk.

This document is sub

ect to chan

e without notice.

Technical

Information

TI04L01L01-02EN

2011.12.16 1st Edition (YK)

■Overview

This is an example or wiring and settings using the UTAdvanced Quick Setting function for "temperature

control in an electric furnace with an SCR (thyristor)." For more details, see the user's manual.

■Relevant models

Standard models of the UT32A, UT35A, UT52A, and UT55A.

■System

■Wiring

Current

output

4–20 mA

Heater

Compensating

Thermocouple type K

SCR (thyristor)

Thermocouple type K

Compensating lead wire

Power

Current output

4–20 mA

Thyristor

Heater

OUT

＋

－

＋

－

2/3

This document is subject to change without notice. TI 04L01L01-02EN 2011.12.16-00

■Settings

To set PID control, thermocouple type K (range 0.0 to 500.0°C), and current control output (4 to 20 mA),

set the parameters below.

(1) Select the desired parameter with the UP or DOWN key

(2) Press SET/ENTER (the setting value blinks)

(3) Change the setting with the UP or DOWN key

(4) Press SET/ENTER to set the new value (the setting value stops blinking but remains

bright)

●Redoing the quick setting

Once functions are configured with the Quick Setting, the Quick Setting function

will not appear after you restart. However, you can redo the Quick Setting by

following the procedure below.

(1) Set the Quick Setting parameter QSM to ON, and re-engage power.

(2) Set the PV input type parameter IN to OFF, and re-engage power.

Press SET/ENTER to accept the "YES" option.

Quick Setting starts

First, the control type parameter CNT appears.

Set CNT (control type) to PID (initial value).

OFF is displayed for IN (the PV input type).

Set IN (PV input type) to thermocouple type K3.

(K3 = -200.0 to 500.0°C)

Set UNIT (PV input unit) to C: Celsius (inital value)

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔPID

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN K3

PV INPUT UNIT

UNIｔC

CONTRＯＬＴYPE

ＳＴＡＲＴＱＵＩＣＫ

ＳＥＴＴＩＮＧ

QSM YES

CNｔPID

PV INPUT TYPE

IN OFF

PV INPUT TYPE

IN K3

PV INPUT UNIT

UNIｔC

Power

Quick Setting

start

3/3

This document is subject to change without notice. TI 04L01L01-02EN 2011.12.16-00

Set RH (maximum value of PV input range) to 500.00°C (the initial value).

Set RL (minimum value of PV input range) to 0.0°C (the initial value).

Set OT (output type selection) to 00.02: OUT terminal (current 4 to 20 mA).

Skip this parameter (not relevant).

Finally, EXIT is displayed. Select YES and press SET/ENTER to complete the

basic function setup and return to the operating screen. Or, you can select NO

to continue with the Quick Setting.

Revision Information

Document name: Setup Procedure: UTAdvanced Quick Setting (Controlling Furnace Temperature with a

Thyristor)

Document number: TI 04L01L01-02EN

First edition: December, 2011

Newly released

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 500.0

OUTPUT TYPE

SELECTION

0ｔ00.02

FINISH

10.

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 0.0

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

MAXIMUM

VALUE OF PV

INPUT RANGE

RH 500.0

OUTPUT TYPE

SELECTION

0ｔ00.02

FINISH

10.

EXIｔYES

MINIMUM

VALUE OF PV

INPUT RANGE

RL 0.0

CONTROL OUTPUT

CYCLE TIME

Cｔ30.0

Andere Handbücher für UTAdvanced UT32A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere YOKOGAWA Controller Handbücher

YOKOGAWA

YOKOGAWA UTAdvanced UT32A Handbuch

YOKOGAWA

YOKOGAWA UTAdvanced UP55A Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT350-01 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UM33A Bedienungsanleitung

YOKOGAWA

YOKOGAWA Vitesse FA-M3V Bedienungsanleitung

YOKOGAWA

YOKOGAWA DYNASERV DM Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT32A-R Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT35A/RSP Bedienungsanleitung

YOKOGAWA

YOKOGAWA AQ2201 Bedienungsanleitung

YOKOGAWA

YOKOGAWA YS1000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT Advanced UT32A Bedienungsanleitung

YOKOGAWA

YOKOGAWA ProSafe-RS Handbuch

YOKOGAWA

YOKOGAWA FA-M3V e-RT3 Plus Bedienungsanleitung

YOKOGAWA

YOKOGAWA STARDOM FCN-500 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT150L Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT520 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT52A/MDL series Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT35A-L Bedienungsanleitung

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Betriebsanleitung

YOKOGAWA

YOKOGAWA UT35A-L Bedienungsanleitung

YOKOGAWA

YOKOGAWA UT321 Bedienungsanleitung

YOKOGAWA

YOKOGAWA YS170 Bedienungsanleitung

YOKOGAWA

YOKOGAWA UTAdvanced UT35A Handbuch

YOKOGAWA

YOKOGAWA FA-M3 Vitesse Handbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung