YOKOGAWA M1233SR Betriebsanleitung

Sales News: TNA0928 Date: 07/29/2009

Portable Calibration Kit (M1233SR)

Why Calibrate?

The relationship between oxygen concentration and the electromotive force of a cell is

theoretical. Generally, a sensor shows a slight deviation from the theoretical value

versus the actual value. In this situation, it is necessary to conduct a calibration in order

to ensure that an accurate calibration curve is obtained, and the deviation from the

theoretical cell electromotive force is corrected.

A gas with a know oxygen concentration is used for calibration. In this instance

Yokogawa recommends using a Zero gas of 0.95 to 1.0% oxygen (O2) with a balance

of nitrogen (N2). The recommended Span, or Reference Gas, should be 20.95 to 21%

oxygen with a balance of nitrogen. This can be accomplished using clean dry instrument

air. The M1233SR Portable Calibration Kit provides one 105L bottle of each of these

gases in a convenient carrying case.

How to use the M1233SR Portable Calibration Kit

CAUTION – The contents of the bottled gases are under pressure. Please use caution when

handling the calibration bottles, and installing the pressure regulators.

1. Remove the Cal (1% O2) gas bottle from the case.

2. Install the pressure regulator, with the bottle opening facing

away from you or other personnel. Verify that the o-ring on

the regulator is not nicked, cracked or cut prior to installation.

3. Attach the 3/16in clear tubing onto the regulator nipple.

4. Insert the brass ¼ in NPT fitting to the ZR22G “CAL IN” port

on the bottom of the ZR22G gas manifold.

5. Attach the 3/16 clear tubing to the brass ¼ in NPT fitting.

Sales News: TNA0928 Date: 07/29/2009

Calibrating with the ZR402G Singe Channel Oxygen Analyzer

1. Select the Setup key from the basic panel display to display Execution/Setup.

2. Select Maintenance from the Execution/Setup display.

3. Select Calibration setup from the Maintenance display.

4. Select Mode from the Calibration setup display (see figure 1).

Figure 1

5. Select Manual and press the Enter key.

6. Follow the on screen instructions on the ZR402G.

7. When instructed to open the calibration gas valve, open

the regulator by pushing in and turning the knob ¼ turn.

(The on-off action of the regulator knob is bi-directional).

The calibration gas is now flowing into the probe CAL IN

port.

8. Repeat the above outlined instructions for a span calibration utilizing the 21%

span gas instead of the 1% zero gas.

Inhaltsverzeichnis

Andere YOKOGAWA Prüfgeräte Handbücher

YOKOGAWA

YOKOGAWA DL6000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL2700 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL7200 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM2000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA 701928 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL1620 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 240413 Bedienungsanleitung

YOKOGAWA

YOKOGAWA MY600 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 2560A Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM2000 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA CA51 HANDY CAL Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL850E Bedienungsanleitung

YOKOGAWA

YOKOGAWA 2553A Bedienungsanleitung

YOKOGAWA

YOKOGAWA EY200 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 701921 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL716 Bedienungsanleitung

YOKOGAWA

YOKOGAWA DL9040 Series Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM4038 Bedienungsanleitung

YOKOGAWA

YOKOGAWA CA320 Bedienungsanleitung

YOKOGAWA

YOKOGAWA AQ1210A Bedienungsanleitung

YOKOGAWA

YOKOGAWA 2553A Bedienungsanleitung

YOKOGAWA

YOKOGAWA DLM5034 Bedienungsanleitung

YOKOGAWA

YOKOGAWA MY40 Bedienungsanleitung

YOKOGAWA

YOKOGAWA 279301 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Vernier

Vernier Go Direct Voltage Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung