YTTEK Y.FORCE YTPC400 Bedienungsanleitung

Page1 of 26

Y.FORCE YTPC400

Platform Quick Start Guide

For MATLAB Development Environment

Deliver date: 2023/Nov.

Version：2.1

 
 
 
Page2  of  26 
Outline 
1. INTRODUCTION...................................................................................................................... 4
2. GETTING STARTED.................................................................................................................. 5
3. VERIFYING THE KIT CONTENTS .............................................................................................. 6
3.1 
K
IT 
C
ONTENTS
.................................................................................................................... 6
3.2 INSTALLING YTPC400-SERIES PLATFORM................................................................................. 7
3.3 
YTPC400
 
P
LATFORM 
F
RONT 
P
ANEL
..................................................................................... 8
3.4 PLATFORM
 
F
RONT 
P
ANEL
 LED
 INDICATORS
............................................................................. 9
3.5 
YTPC400
 
P
LATFORM 
B
ACK 
P
ANEL
..................................................................................... 10 
3.6
 
YTPC400
 
P
LATFORM 
S
IDE 
P
ANEL
 ...................................................................................... 11 
4. CONFIGURING THE DEVICE AND COMPUTER ENVIRONMENT SETTING............................ 12 
4.1 REQUIRED SOFTWARE ......................................................................................................... 12 
4.2 ETHERNET INTERFACE.......................................................................................................... 12 
4.3 CONFIGURING THE HOST ETHERNET INTERFACE ....................................................................... 13 
5. PLATFORM SOFTWARE QUICK START.................................................................................. 17 
5.1 STEP1: INITIALIZATION ........................................................................................................ 17 
5.2 STEP2: RUN EXAMPLE......................................................................................................... 18 
6. INTRODUCTION OF MATLAB APIS AND EXAMPLES ............................................................ 19 
6.1 BASIC EXAMPLE ................................................................................................................. 19 
6.1.1 Receive baseband data : RX_YTPC400() ...................................................................... 20 
6.1.2 Transmit baseband data : TX_YTPC400()..................................................................... 21 
6.1.3 TRX Loop Back : TX_RX_YTPC400() .............................................................................. 23 
6.1.4 Example 1: Single Tone Loopback Test......................................................................... 23 
6.2 COMMUNICATION EXAMPLE................................................................................................. 24 

Page3 of 26

6.2.1 OFDM Loop Back Test .................................................................................................. 24

7. TROUBLESHOOTING............................................................................................................. 25

8. DOCUMENT VERSION HISTORY ........................................................................................... 25

Page4 of 26

1. Introduction

YTPC400x Series

Features:

RF Capabilities

• Maximum 2 TX, 2 RX

• 10 MHz to 9 GHz frequency band

• Up to 400 MHz bandwidth per channel

Baseband Processing

• 12-bit, 3.93216 Gsps ADC

• 14-bit, 3.93216 Gsps DAC

Software

• MATLAB

• C/C++

Synchronization

• REF IN (clock reference input)

• REF OUT (clock reference output)

• PPS IN (PPS time reference)

• TRIG IN

Trigger mode

• Pulse trigger

Peripherals

• 3.5mm SMA female

• 1 RJ45 (1 GbE)

• 1 USB to JTAG

Power

• 12V DC

Form Factor

• 275*280*74 mm

Applications:

•5G NR sub-6GHz RU

•5G mmWave RU

•WiFi 6E transceiver

Page5 of 26

2. Getting Started

The purpose of this document is to familiarize users with the feaures and usage of YTPC400-Series

platform. Use this document to help users get started with setting up the Platform and reviewing test

software. With this document, you will explore what you can do with the YTPC400-Series platform.

＊If users are using this platform for the first time, please operate it as the following steps:

Page6 of 26

3. Verifying the Kit Contents

3.1

Kit Contents

1. YTPC400x platform

2. DC Power adapter 12V with 110V / 220V power cord

3. SMA (Male)-to-SMA (Male) cable 2 pieces

4. 1G Ethernet cable

⚫Preparing the Environment

Ensure that the environment users are using the YTPC400 platform in meets the following specifications.

Ambient temperature range

0 °C to 45 °C

Optimized Operating temperature

23 °C ± 5 °C

Operating humidity

20% to 80% relative humidity, noncondensing

Indoor use only.

The platform is not waterproof and dustproof

Do not operate the YTPC400 platform in an environment not specified as above. Product misuse can

result in a hazard.

If the product is damaged, return it to YTTEK for repair. It is not recommended to repair by yourself.

Page7 of 26

3.2 Installing YTPC400-Series Platform

1. Use the Ethernet cable to connect the YTPC400-Series platform to the computer. Please do not

unplug the cable during operation.

2. Connect the 110V / 220V AC to 12V DC power adapter to the YTPC400-Series platform.

3. Plug the 110V / 220V power cord of power adapter into a wall outlet.

4. Connect SMA cables to confirm signal source.

5. Press PWR button and turn on platform.

⚫Uninstalling YTPC400-Series Platform

1. Press PWR button and turn off platform.

2. Plug out the 110V / 220V power cord.

3. Disconnect the 110V / 220V AC to 12V DC power adapter.

4. Plug out the Ethernet cable/SMA cables.

Page8 of 26

3.3

YTPC400 Platform Front Panel

Connector

Use

SMA

Tx1

Input or output terminal for the RF signal on channel 1 and 2.

⚫female SMA connector

⚫50 Ω impedance

⚫single-ended

Rx1

TX2

Rx2

DCI

A digital control signal interface that connects to the YTTEK RF module for beam-

forming realization.

PWR

Power on/off switch button.

Page9 of 26

3.4 Platform

Front Panel

LED

indicators

The LEDs indicate indexes of platforms. The location of the lightening LED means the setting of the

Ethernet IP of this platform.

LED

Description

Color

State

Indication

[0:3]

Indicate the IP number of

the device.

OFF

The network is not connected.

Green

Blinking

There is a problem with device initialization.

Green

Solid

The device has been assigned IP with the

format as below.

IP [0:3]

role

192.168.3.100

(Default)

Master

192.168.3.101

Slave

192.168.3.102

Slave

192.168.3.103

Slave

＊Note: IP connection and LEDs status must be confirmed before Init.

＊Note: If user wants to change device IP, please refer to section 6.7 IP_Change().

Page10 of 26

3.5

YTPC400 Platform Back Panel

Connector

Use

DC IN

Input the 12V DC power by power adapter in the YTPC400 kit contents.

PL ETH

Connect to computer for transaction of data and control signal. This port

does not support 10M/100M Ethernet.

JTAG

A JTAG interface that connects the host computer to the device FPGA for

update purposes. This port can be used with the Xilinx configuration tool

to load a new bitfile provided by YTPC400 platform.

SD Card

A secure digital input/output (SDIO) interface to provide access to general

purpose non-volatile SDIO memory cards and devices.

Inhaltsverzeichnis

Andere YTTEK Netzwerk-Hardware Handbücher

YTTEK

YTTEK YTPC100 Series Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung