Z-Wave LinkedGo ST1000EZ0 Bedienungsanleitung

○

1Running Status: Fan Speed, Mode, Alarm.

○

2Z-Wave Local network signal.

○

3If you set thermostat as a master, you can see the switch. Use it close all A/C.

○

4Slide indicator

○

5Increase setting temperature. Hold 5 seconds for Add thermostat into

Gateway.

○

6ON/OFF button, or back to homepage.

○

7Decrease setting temperature. Hold 5 seconds for Delete thermostat from

Gateway.

○

8Room temperature setting.

Note: The default version is Chinese. Go to page 3 and click the Setting, then

enter the password “111220”to switch to the English version.

Note: Upgrade method

Step 1. Copy the “bl_update”folder into SD card.

Step 2. Insert the SD card into the thermostat.

Step 3. Switch to the third page, click "Settings", enter the password “888888”.

Press the middle button.

Step 4. Start upgrade, and it will be successful in about 2 minutes.

Step 5.After success, the thermostat will restart automatic.

Z-WAVE NETWORK SETUP

Add for Inclusion:

First stay in the home page, trigger the main

controller to enter the add mode, then press and hold

the “+”button for 5 seconds without letting go, the

thermostat panel will display the page that enters the

“Add”, at this time the device officially adds the

process, about tensAfter the second, the panel will

display the Add Successful interface. The thermostat

has been added successfully.

Remove for Exclusion:

First stay in the home page, trigger the main

controller to enter the delete mode, then press and

hold “-”button for 5 seconds without letting go, the

thermostat panel displays the page that enters the

“Remove”, the device officially deletes the process, and the panel will display after a few

seconds. Delete the successful interface. The thermostat has been removed successfully.

Reset Factory Default:

Please use this procedure only when the network primary controller is missing or

otherwise inoperable.

Slide to the third interface, find "About", select "Reset all settings", and confirm.

Devices from multiple manufacturers in one network

This product can be operated in any Z-Wave network with other Z-Wave certified

devices from other manufacturers. All non-battery operated nodes within the network will act

as repeaters regardless of vendor to increase reliability of the network.

Association Group:

Thermostat supports 1 association group (0x01), which can include five Node ID.A

gateway is suggested to associate with this group. Then if any changes happen, such as:

temperature, working mode, fan state etc., the thermostat will report to this associated device

(gateway). All the reports sent via Lifeline group.

Commands sent via Lifeline:

COMMAND_CLASS_THERMOSTAT_MODE,

COMMAND_CLASS_THERMOSTAT_SETPOINT,

COMMAND_CLASS_THERMOSTAT_FAN_MODE,

COMMAND_CLASS_SENSOR_MULTILEVEL,

COMMAND_CLASS_CONFIGURATION,

COMMAND_CLASS_DEVICE_RESET_LOCALLY

Z-WAVE SPECIFICATION

Configuration CC:

Parameter

Number/Size

Parameter Name

Parameter Values Description

Default value

4/2

Custom mode

0-standard mode

2-Sleeping night mode

3-Sleeping noon mode

5/2

Heating method

0-Heating by fan coil only

1-Floor heating only

2-Fan coil and floor heating both

6/2

Master and slave

setting

0-Slave

1-Master

9/2

Summer

temperature

difference

calibration

Value range: -50~50(-50 means

△T=-5℃)

Precision:1

Calibration for the temp. sensor

in summer

10/2

Algorithm enable

0-off 1-on (have no use

currently)

17/2

Theme style

0-classic/1-weather/2-Digital

clock/3-Rome clock/4- cartoon

clock

20/2

Lower

temperature limit

Value range:50~350(50 means

for 5℃, 350 means

35℃)Precision:1

21/2

Upper

temperature limit

Value range:50~350(50 means

for 5℃, 350 means

35℃)Precision:1

350

25/2

Winter

temperature

difference

calibration

Value range:-50~50(-50 means

△T=-50℃)Precision:1

Calibration for the temp. sensor

in winter

82/2

Outdoor

temperature

Value range: -50℃~50℃

Precision:0

84/2

Weather theme

0-sunny

1-windy

Inhaltsverzeichnis

Andere Z-Wave Thermostat Handbücher

Z-Wave

Z-Wave 5430499 Bedienungsanleitung

Z-Wave

Z-Wave ZTS-500 Bedienungsanleitung

Z-Wave

Z-Wave T100R Bedienungsanleitung

Z-Wave

Z-Wave ZTS-110 Z-Thermostat Bedienungsanleitung

Z-Wave

Z-Wave CT100 Bedienungsanleitung

Z-Wave

Z-Wave SR-ZV9092A Bedienungsanleitung

Z-Wave

Z-Wave ZTS-100 Bedienungsanleitung

Z-Wave

Z-Wave CT100 Bedienungsanleitung

Z-Wave

Z-Wave ZTS-110 Z-Thermostat Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Honeywell

Honeywell CM721 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

Honeywell

Honeywell RLV4305 Bedienungsanleitung

Honeywell

Honeywell Prestige 2.0 THX9421 Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung