ZALMAN CNPS5100-Al Bedienungsanleitung

Zalman Tech Co., Ltd.

User

’’

s Manual

CNPS5100-Al

CNPS5100-AlCu

CNPS5100-Cu

User

’’

s Manual

http://www.zalman.co.kr E-mail:[email protected]

The CNPS5100-Al / CNPS5100-AlCu / CNPS5100-Cu coolers come with an adjustable

fan speed connector (FAN MATE 1) for allowing you to vary the CPU fan speed to

create an optimal cooling environment.

1. Features

1) Zalman’s CPU Coolers do not generate noise and vibration in silent mode.

2) The heat dissipating material of the Flower HeatSink (FHS) is pure copper or aluminum.

3) Innovative FHS(Flower HeatSink) design offers lower noise and thermal resistance.

4) With the included adjustable fan speed connector, the user can freely adjust the CPU fan's RPM.

5) Zalman’s CPU Coolers cool a CPU to a temperature sufficiently below the temperature required by

the CPU manufacturer without generating noise.

6) Zalman’s CPU Coolers offer very stable operation of a CPU in an OVERCLOCKED environment.

* If you try OVERCLOCKING, please make sure that the fan is in Normal Mode.

* Zalman Tech. Co., Ltd. is not responsible for any damage to systems or CPUs caused by CPU

OVERCLOCKING.

2. Components

1) One FHS assembly 2) Bolts A / Bolts B / Bolts C - four each

3) One Fan (6025) 4) Four Nipples (spacers)

5) Four Tapered Springs 6) One Sheet of Washers A (6 mm) and Washers B (8 mm)

7) Thermal Grease 8) One Adjustable Fan Speed Connector (FAN MATE 1)

3. Product Specifications

1) FHS

- 1 -

CNPS5100-Al, CNPS5100-AlCu, CNPS5100-Cu

Note 1) CNPS5100-Cu exceeds AMD’s heatsink mass specification of 300g, so special care should be

taken when moving the computer. Zalman Tech. Co., Ltd. is not responsible for any damage

to systems or CPUs caused by moving the computer after installing the CNPS5100-Cu.

2) Fan (GM1206PTVX-AF)

①Dimensions : 60(L) X 60(H) X 25(W) mm ②Weight : 55g

③RPM : 3000 RPM±10% (Silent Mode) ④Noise Level : 20dB ±10% (Silent Mode)

5200 RPM ±10% (Normal Mode) 36dB ±10% (Normal Mode)

⑤Bearing Type : Vapo Bearing

* The specifications of any product may change without prior notice to improve the performance thereof.

CNPS5100-Al

CNPS5100-AlCu CNPS5100-Cu

Part NO.

Dissipating Area (㎠)

Dissipating Material

Weight (g)

Pure Aluminum

128

0.43

0.26

180

0.42

0.25

Pure Cooper

344

0.39

0.23

Silent Mode

Normal Mode

Thermal

Resistance

(℃/W)

Model

Spec.

238

ZM4360EE-Al

290

ZM4360EE-AlCu

454

ZM4360EE-Cu

Dimensions (mm)

Weight (g)

(1)

Pure Aluminum

Pure Cooper

90 (L) ×66 (W) ×70(H)

1500

3) FAN MATE 1

①Dimensions : 200(L) X 23(W) X 21(H) mm ②Weight : 20 g

③Output Voltage : 5V ~ 11V ±2% ④Allowable Wattage : 6W or lower

4. Compatibility of CPU : Socket 462 - AMD Duron, AMD Athlon, AMD Athlon XP

Socket 423 - INTEL Pentium 4

- 2 -

* The specifications of any product may change without prior notice to improve the performance thereof.

Note 2) This cooler cannot be mounted on a mainboard that does not have four holes around the socket.

Also, Socket 478 mainboards are not supported.

5. Please keep the following in mind for a noiseless computer

1) For a noiseless computer, a Noise Prevention (NP) Power Supply, a NP HDD, a NP CD-ROM and

a NP VGA CARD should be used together with this cooler.

2) Zalman affixes a Computer Noise Prevention System (CNPS) Mark to each of its parts and

components used for noiseless computers.

3) If a high-performance VGA card is required, it is preferable to use a NP VGA Card having a VGA FHS.

4) When buying a new VGA card, it is recommended to buy a fanless VGA card.

6. Caution

1) The CNPS5100-XX can be mounted only on a mainboard having four holes around the CPU socket.

2) For mainboards on which the CNPS5005-XX can be mounted, please refer to the list of approved

mainboards on Zalman’s web site (www.zalman.co.kr/english/product/ccc/usmainboard.htm).

3) If the RPM of the CPU fan cannot be measured, please update the BIOS to the latest version. For

more information on updating your BIOS, please refer to you the mainboard manufacturer’s web

site (There are some mainboards that cannot measure the RPM of fans in Silent Mode. However, this

will not affect the performance.

7. Patent Applications

◇Korean Patent Application No. 01-11056

◇Patent Applications Pending in over 20 nations around the world, including the U.S., EU, and Japan

CNPS5100-Al

CNPS5100-AlCu

CNPS5100-Cu

Support

all current

CPU Clock

speed

CPU Type INTEL

Pentium 4 Duron Athlon Athlon XP

AMD

Model

Silent Model

Normal Model

Silent Model

Normal Model

Up to 1.6㎓

Up to 2.0㎓

Up to 1.7㎓

Over 2.0㎓

1.4㎓

Over 2.13㎓(2600+)

Up to 1.67㎓

(2000+)

Up to 2.0㎓

(2400+)

Up to 1.73㎓

(2100+)

Up to 2.13㎓

(2600+)

Athlon XP

(T-Bird)

2. Check whether or not nipples (spacers) for installing a CPU cooler are mounted between the mainboard and

the computer case.

◆Installation in a Computer Case Having Nipples (spacers) for Installing a CPU Cooler (See Figure 2)

- 3 -

< Figure 1 >

* The specifications of any product may change without prior notice to improve the performance thereof.

AMD CPU

Intel P4 CPU

(1) Insert one of the provided bolts A into a tapered

spring as shown in Figure 2, and insert the bolt

A into an appropriate mounting hole (See Figure 1)

of the cooler body. Repeat until four bolts are in

stalled in the cooler body. (Caution! The diameter

of the spring increases from one end to the other

end. The end of the spring having a smaller

diameter should be directed to the head of the bolt

as shown in Figure 3.)

(2) Spread the thermal grease, which is provided together

with the cooler, on the surface of the CPU core.

Good Bad

< Figure 2 >

Spring

Bolt A(59-63mm)

Hole

Mainboard

Case

Mainboard

Case Nipple

Case

< Figure 3 >

1. First, check whether your CPU is a P4 CPU or an AMD CPU. Then, depending on the type of CPU,

insert the bolts (A or B) into the appropriate holes in the cooler body (See Figure 1).

IInnssttaallllaattiioonn ooff FFHHSS

- 4 -

* The specifications of any product may change without prior notice to improve the performance thereof.

(1) Detach the mainboard from the computer case. Mount the provided nipples, bolts C, and washers (A or B)

on the mainboard as shown in Figures 5 and 6, then reattach the mainboard to the computer case.

(Caution! Different washers are used depending on the size of the holes formed around the CPU socket on the

mainboard. That is, if the size of the holes is 6 mm as shown in Figure 6(A), washer A and B is used, and if the

size of the holes is 4 mm as shown in Figure 6(B), only washer B is used. A bolt with a washer is used for the

upper part of the mainboard and another bolt with a washer isused for the lower part of the mainboard.)

(3) Check the locations of the holes around the socket

and those of the bolts A mounted in the mounting

holes, and then place the FHS horizontally on the

center of the CPU.

(4) To make the FHS completely contact the CPU core

(this is important to protect the CPU core from

overheating), tighten each bolt A by one turn in the

order shown in Figure 2 (i.e., in a diagonal sequence)

with a screw driver until they no longer go in

(as shown in Figure 4).

◆Installation in a Computer Case That Does Not Have Nipples for Installing a CPU Cooler (See Figure 5)

< Figure 5 >

< Figure 6 >

< A > < B >

Washer A

(Inside Diameter : 6mm)

Bolt C

Nipple

Washer B

(Inside Diameter : 4mm)

Washer B

(Inside Diameter : 4mm)

Mainboard

< Figure 4 >

Good Bad

Mainboard

Case

Washer (A or B)

Spring

Bolt B(42-47mm)

Nipple

Hole

Washer B

Bolt C(6∼13mm)

Mainboard

Case

Mainboard

Case

- 5 -

* The specifications of any product may change without prior notice to improve the performance thereof.

(2) Insert one of the provided bolts B into a tapered spring

as shown in Figure 5, and insert the bolt B into an appropriate

mounting hole of the cooler body (See Figure 1). Repeat

until four bolts are installed in the cooler body.

(Caution! The diameter of the spring increases from

one end to the other end. The end of the spring having

a smaller diameter should be directed to the head of

the bolt as shown in Figure 7.)

(3) Spread the thermal grease, which is provided together with the cooler, on the surface of the CPU core.

(4) Check the locations of the nipple holes on the mainboard and the locations of the bolts B, and then place

the Cooler horizontally on the center of the CPU.

(5) For Pentium 4 CPUs :

To make the FHS completely contact the CPU

core (this is important to protect the CPU core

from overheating), tighten each bolt B by one

turn in the order shown in Figure 5 (i.e., in a

diagonal sequence) with a screw driver. The

bolts are mounted so that the height of the bolt

heads is the same as the height of the mounting

holes (as shown in Figure 8).

(Caution! If the height of the bolt head is much lower than that of the mounting hole, the

mainboard and the CPU may be damaged.)

For AMD CPUs :

To make the FHS completely contact the CPU

core (this is important to protect the CPU core

from overheating), tighten each bolt B by one

turn in the order shown in Figure 5 (i.e., in a

diagonal sequence) with a screw driver until

they no longer go in (as shown in Figure 9).

Good

Bad

< Figure 7 >

< Figure 8 >

< Figure 9 >

Pentium 4 CPU

AMD CPU

Mainboard

1. Connect FAN MATE 1 (adjustable fan speed connector) to the 3-pin connector of a fan as

shown in Figure 10.

2. Connect FAN MATE 1 to the 3-pin CPU fan connector of the mainboard.

3. Turn on the computer after assembly is finished.

4. When booting a computer in which FAN Mate 1 is used, an alarm sound may be generated

by a system monitoring program to indicate that the rotation of the CPU fan is slow.

If this happens, you may turn the speed control knob fully clockwise to increase the fan

speed, set“CPU Fan Detected”to“Disabled”in the BIOS settings, or set the slowest

rotation of the CPU fan in the system monitoring program to less than or equal to 1500RPM.

Note 1) Some mainboards do not boot if the rotation of the CPU fan is below a certain

number of RPM. If the BIOS settings are updated, Silent Mode can be used. For

more information on updating BIOS , please refer to your mainboard manufacturer’’

web site.

5. First check what CPU you are using, then check the CPU compatibility list on page 2. When

the speed control knob is turned fully counter-clockwise, the fan speed is minimum and the

fan operates in silent mode. You can select the desired fan speed by turning the knob.

Note 2) FAN MATE 1 has been specifically designed for the fan of this product.

Zalman Tech. Co., Ltd. is not responsible for any damage to systems or CPUs

caused by using it with other types of fans.

- 6 -

* The specifications of any product may change without prior notice to improve the performance thereof.

󳣍For more information on this product, visit our homepage at www.zalman.co.kr. 󳣍

3-Pin CPUFan Connector

3-Pin Connector of the Fan

Mainboard

FAN MATE 1

Speed Control Knob

AAddjjuussttiinngg FFaann SSppeeeedd

< Figure 10 >

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN FX100 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN CNPS16X Bedienungsanleitung

ZALMAN

ZALMAN S5 Bedienungsanleitung

ZALMAN

ZALMAN ZM-WB3 Gold Bedienungsanleitung

ZALMAN

ZALMAN ZM-MFC1 Combo Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 Bedienungsanleitung

ZALMAN

ZALMAN ZM-GWB2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN AMD Athlon 64 Socket 754 CPU Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 V2 Kurzanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN CNPS9800 MAX Bedienungsanleitung

ZALMAN

ZALMAN ZM80C Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS 4X Bedienungsanleitung

ZALMAN

ZALMAN CNPS8700 NT Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN ZM-WB4 GOLD Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN Extreme Gaming VGA Cooler GV1000 Bedienungsanleitung

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung