ZALMAN CNPS9700 LED Bedienungsanleitung

User’s Manual

CNPS9700 LED

www.ZALMAN.com

V 2.0

Intel Socket 1156/775 CPU

Core i7

Core i5

Core 2 Quad

Core 2 Duo

Pentium Dual Core

Pentium D

Pentium 4

Celeron D

AMD Socket AM3/AM2+/AM2/754/939/940 CPU

Phenom Ⅱ

Phenom

Athlon ⅡX2

Athlon

Athlon 64

Athlon X2

Athlon 64 X2

Athlon FX

Athlon 64 FX

Opteron

Dual-Core Opteron

Sempron

To ensure safe and easy installation,

please read the following precautions.

.COM

2. Specifications

Model

Spec. CNPS9700 LED

Material Pure Copper, Aluminum

Weight 764g

Dimensions 90(L) Ⅹ124(W) Ⅹ142(H)㎜

Fan

Bearing-Type 2 Ball-Bearing

RPM 1,250 ~ 2,800rpm ±10%

Noise Level 19.5 ~ 35dBA ±10%

Input Voltage 12V

Fan

Mate 2

Output Voltage 5 ~ 11V ±2%

Maximum Capacity Up to 6W

ZM-STG1

Net Weight 3.5g

Temp Range -40 ~ 150℃(-40 ~ 302℉)

1. Precautions

1) Use and keep product away from reach of children and pets.

2) Do not ingest the Thermal Grease, and avoid its contact with skin and

eyes. If contact is made with skin, wash off with water. If ingested or

irritation persists, seek medical attention.

3) To prevent possible injuries, gloves must be worn while handling this

product.

4) Excessive force exerted on the fan may cause damage to the fan and/

or system.

5) Avoid inserting objects or hands into the fan while it is in operation to

prevent product damage and injuries.

6) Check the components list and condition of the product before

installation. If any problem is found, contact the retailer to obtain a

replacement.

7) Zalman Tech Co., Ltd. is not responsible for any damages due to

overclocking.

8) During transportation of the system, the cooler must be removed.

Zalman is not responsible for any damages that occur during the

transport of a system.

9) Product design and specifications may be revised to improve quality

and performance.

Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due

to external causes, including but not limited to, improper use,

problems with electrical power, accident, neglect, alteration,

repair, improper installation, or improper testing.

.COM

1) Common Components

3. Components

Clip Support Fixing Bolts

AMD Clip LeverAMD Clip

Clip Support

User’s Manual

Washers Nuts

Intel Clip

Clip Fixing Bolts

Cooler

2) Intel Components

3) AMD Components

Thermal Grease

Fan Mate 2 Cable

Fan Mate 2 Double-Sided Tape

.COM

4. Installation Requirements

1) Space Requirements

2) Air Guide Removal

3) Cooler Orientation

The cooler’s installation requires unobstructed space with dimensions of 127㎜

(width), 93㎜(length), 145㎜(height), and the CPU as a central reference point.

Please check if components such as ODDs and PSU protrude into the required

space.

Air guides on enclosures must be removed, before the cooler’s installation, for

they protrude into the cooler’s required space.

It is recommended that the cooler be installed so that air flows from the cooler toward

the enclosure’s rear exhaust fan.

93㎜

145㎜

127㎜

PSU

.COM

4) Installation Based On Clip Orientation

A. Horizontal Clip Orientation

B. Vertical Clip Orientation

.COM

②Remove any foreign particles from the Base of the the cooler and the

surface of the CPU, then shake well the enclosed thermal grease and

apply a through layer of thermal grease on the surface of the CPU and

the Base of the cooler.

1) Intel Socket 1156 / 775 Installation

①Install the Clip Support to the motherboard according to the socket-type.

5. Installation

Nut

Washer

Bolt(silver)

Clip Support

M/B

Socket 1156

Socket 775

▶Please make note of the Lever Slot’s direction when

installing the Clip Support.

Caution

Lever

Slot

.COM

④Refer to Section 6 ‘Fan Mate 2 Installation and Usage’for instructions on

power connection.

③Insert a Bolt into both ends of the Intel Clip, then screw each Bolt a little

at a time, alternating between each Bolt, until the Clip is fully installed.

2) AMD Socket AM3 / AM2+ / AM2 / 754 / 939 / 940 Installation

①Remove any foreign particles from the Base of the the cooler and the

surface of the CPU, then shake well the enclosed thermal grease and

apply a through layer of thermal grease on the surface of the CPU and

the Base of the cooler.

▶For installations with horizontal Clip

orientation, please be cautious to

not exert excessive force on the fan

while using a screwdrivers to install

the Clip.

Caution

.COM

③Refer to Section 6 ‘Fan Mate 2 Installation and Usage’for instructions on

power connection.

①Connect Fan Mate 2 between the

Fan Cable and the motherboard

as shown in the diagram below.

②Fan Mate 2 can be installed on the

side of the case using Double-Sided

Tape.

M/B

Fan Connector (Cooler)

Double-Sided Tape

6. Fan Mate 2 Installation and Usage

1) Fan Mate 2 Installation

②Insert the AMD Clip Lever into the AMD Clip’s Clip Lever Slot, then hook

the opposite end on its Lug, press down on the Clip Lever and hook it

onto its Lug.

Lug

.COM

GS1000 / GS1000SE

•E-ATX / Standard ATX / microATX Compatible

* Supports Intel Dual Xeon server motherboards

•UP to 6 Hot Swap HDD Bays

* GS1000(3 Standard / 3 Optional)

* GS1000 SE(Optional)

•Tool-Free HDD Installation

•Airflow Optimized Design

•Vibration Absorbing HDD Dampers and Feet

•The World’s First Roller Rails for Smooth

& Easy PSU Installation

•Cable Compartment Behind the Motherboard

for Cable Management

•Dedicated Fan Compartment for Fanless PSU Users

•Up to a Total of 8 HDD Bays

* 2 Adaptors & Bezels included for use of two 5.25”bays as 3.5”Internal(HDD)/

External(FDD) Bays

GT1000

•High-End Gaming Enclosure Built with Sturdy

All Aluminum Panels

•Three Tool-Free Hinged Magnetic Panels

(2 Left, 1 Right) for Easy Installation and

Access to Components

•Tool-Free Installation of Disk Drives,

Fan Controlles, Audio Interfaces etc.

•Accommodates up to 6 Hard Drives

•Luxurious and Cool Aesthetics.

•Color Option: Black (Red LED Fans),

Titanium (Blue LED Panel).

For more information, please visit our website.

2) Fan Mate 2 Operation

Adjust the Fan Speed Control

Knob for RPM control.

Fan Speed Control Knob

In the case that you get a BIOS error beep:

①Rotate the Fan Speed Control Knob clockwise to the maximum setting.

②Disable CPU Fan Detected in BIOS setting or set the system monitoring

program’s CPU Fan RPM to the lowest setting.

※Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this

case inquire to the motherboard’s manufacturer for additional details.

BIOS Booting Error

Andere Handbücher für CNPS9700 LED

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN Optima CNPS8X Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR2 Kurzanleitung

ZALMAN

ZALMAN ZM-RF1 Bedienungsanleitung

ZALMAN

ZALMAN ZM-WB4 GOLD Bedienungsanleitung

ZALMAN

ZALMAN CNPS16X Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Quiet Bedienungsanleitung

ZALMAN

ZALMAN FC-ZV9 Bedienungsanleitung

ZALMAN

ZALMAN CNPS5X PERFORMA Bedienungsanleitung

ZALMAN

ZALMAN ZM80D-HP Bedienungsanleitung

ZALMAN

ZALMAN CNPS7500 LED Bedienungsanleitung

ZALMAN

ZALMAN MS800 Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 V2 Kurzanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000A Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN CNPS 4X Bedienungsanleitung

ZALMAN

ZALMAN CNPS6500B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN CNPS2X Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AM2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8900 Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN CNPS12X Bedienungsanleitung

ZALMAN

ZALMAN CNPS8700 NT Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung