ZALMAN CNPS9700 LED Bedienungsanleitung

* Please read this manual thoroughly before installation.

http://www.zalman.co.kr http://www.zalmanusa.com

IInntteell SSoocckkeett 777755 CCPPUU

Core 2 Duo

Dual Core Pentium

Pentium D

Pentium 4

Celeron D

AAMMDD SSoocckkeett AAMM22//775544//993399//994400 CCPPUU

Athlon 64 FX

Athlon 64 X2 Dual Core

Athlon 64

Opteron

Sempron

(English version)

CNPS9700 LED

※

The specifications of any product may change without prior notice to improve performance.

3. Exploded View

Fan

Fan Support

CPU Block Cover

Heat sink

CPU Block Fixing Bolt

1. Features

1) Compatible with all single and dual core CPUs or Intel’s Socket 775 and AMD’s Socket AM2/754/939/940.

2) 100% copper heatsink with aerodynamically optimized “tunnel” design or maximum cooling e iciency.

3) Innovative and patented, curved heatpipe design or a heat trans er capacity o up to six heatpipes with

the use o just three.

4) 0.2mm ultra-slim ins or minimized weight and reduced air low resistance.

5) Ultra quiet CNPS 110mm LED an.

6) Does not generate noise or vibration in Silent Mode.

7) Adjustable an speed controller (FAN MATE 2) included.

8) Super Thermal Grease (ZM-STG1) included.

Speed

Note (1) The maximum weight or a cooler is speci ied as 450g or Intel Socket 775 and AMD Sockets

754/939/940. Special care should be taken when moving a computer equipped with a cooler that exceeds

the speci ied weight limit. Zalman is not responsible or any damage that occurs when moving a computer.

Note (2) The an rotates at 2,800rpm i connected directly to the motherboard’s power connector without

the use o FAN MATE 2.

Note (3) measured at 1m rom noise source.

Note (4) Optimal Per ormance will be reached a ter approximately 7 days o regular computer use rom the

time o installation.

CNPS9700 LED

Model

Spec.

Materials

Dimensions

(mm)

Dissipation Area (

㎠

)

Weight(g)

Bearing Type

Noise Level (dBA)

Output Voltage

Power Consumption

Weight

Temperature Range

Pure Copper and Aluminum

90(L) X 124(W) X 142(H)

5,490

Heatsink: 690g, Total (including fan): 764g

(1)

2-Ball

1,250RPM ± 10 % (Silent Mode)

2,800RPM ± 10 % (Normal Mode )

(2)

19.5dBA ~ 35dBA ± 10%

(3)

5V ~ 11V ±2 %

6W or lower

3.5g

-40℃~150℃ (-40℉~302℉)

2. Speci ications

Fan

FAN MATE 2

ZM-STG1

(4)

※

The specifications of any product may change without prior notice to improve performance.

󳣍Korean Patent Reg. No. 10-0600448

󳣍Korean Design Reg. No. 30-0403411, 0403412

󳣍Patent applications pending in over 20 nations around the world including USA, EU, and Japan.

4. Patents

1) Excessive orce exerted on the an may damage the an, resulting in damage to the system.

2) Avoid inserting any objects into the an while it is in operation.

3) Use and keep the product away rom the reach o children and pets.

4) Check the components list and condition o the product be ore installation. I any problem is ound, contact

your place o purchase to obtain a replacement.

5) Do not ingest or make oral contact with the Thermal Grease. I ingested, get medical attention.

Disclaimer)

Zalman Tech Co., Ltd. is not responsible or any damages due to external causes, including but not limited

to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation,

or improper testing.

5. Precautions

2) Components for MD Sockets M2/754/939/940

❼

One (1) Clip or AMD Sockets

❽

One (1) Clip Lever or AMD Sockets

3) Components for Intel Socket 775

❾

One (1) Clip (S-Type)

❿

Four (4) Bolts ( or installing the cooler)

󱆌

Four (4) Clip Support Fixing Bolts or Socket 775

󱆍

One (1) Clip Support or Socket 775

󱆎

One (1) Backplate or Socket 775

1) General Components

❶

One (1) CNPS9700

❷

One (1) Thermal Grease (ZM-STG1)

❸

One (1) Fan Speed Controller (FAN MATE 2)

❹

One (1) FAN MATE 2 Cable

❺

One (1) Double-sided Tape

(For attaching FAN MATE 2)

❻

One (1) User’s Manual

6. Components

󱆎

❼

❽

❻

❶

❸❺❹

❿

󱆌

󱆍

7. Compatible CPUs

1) All Intel CPUs o Socket 775

2) All AMD CPUs o Socket AM2/754/939/940

❷

❾

※

The specifications of any product may change without prior notice to improve performance.

8. Installation Requirements

I the case is equipped with an Air Guide, then the Air Guide Duct must be removed be ore installation.

Re er to the ollowing diagrams, and install only on systems that meet the ollowing installation requirements :

①

No inter ering components (PSU, graphic card etc.) within 62mm rom the center o the CPU.

No inter ering components (ODD etc.) within 48mm rom the center o the CPU.

Case cover must be at least 150mm apart rom the motherboard.

9. Installation

※※

The Clip Installation Method

The CNPS9700 must be installed in the orientation that matches the rear system fan’s airflow.

(Re er to the diagram above)

The Clip installation method depends on the motherboard’s socket orientation.

Follow the correct installation method or your motherboard type.

Be care ul not to exert excessive orce on the an during installation o the Clip, as it may damage the an.

. For motherboards with a horizontally-oriented Retention Guide

B. For motherboards with a vertically-oriented Retention Guide

Retention Guide

Clip

Retention Guide

Clip

Case Cover

150mm

Motherboard

PSU

62mm

System Fan

Air Flow

Case

48mm

Graphic Card Slot

※

The specifications of any product may change without prior notice to improve performance.

⑤⑤

Power Connection (F N M TE 2)

◆

Please re er to “FAN-MATE 2 Installation and Usage” on page 6.

1) Intel Socket 775

①①

Clip Installation

Re er to “The Clip Installation Method” on page 3 to correctly install the Clip (S-Type,

⑨

) according to

the orientation o the Retention Guide.

②②

Clip Support Installation

Align the Clip Support or Socket 775 (

⑫

) and the Backplate or Socket 775 (

⑬

) with the mounting holes

on the motherboard, and asten them together by using the Clip Support Fixing Bolts (

⑪

The Lever Slot on the Clip Support or Socket 775 (

⑫

) must be properly oriented on the hinged side

o the socket lever when installing.

※

The Backplate Support on the Backplate or Socket 775 (

⑬

) can be removed i deemed unnecessary.

③③

Thermal Grease pplication

Clear o particles or any residue rom the contact sur ace o the CPU and heatsink. Shake the

Thermal Grease (ZM-STG1,

②

) well then apply on the contact sur ace o the CPU and heatsink base.

CPUCPU

※

Note

When installing the CNPS9700 on a motherboard with a horizontally-

oriented Retention Guide, take extra care to not exert excessive orce

on the an. Excessive force may damage the fan.

Clip Support Fixing Bolt, ⑪

Clip Support or Socket 775, ⑫

Motherboard

Backplate or Socket 775, ⑬

Backplate Support

Socket Lever Hinge

Socket Lever

Lever Slot

④④

Cooler Installation

Insert two Bolts (

⑩

) into the holes o the Clip (S-type,

⑨

) and

place the CNPS9700 on the center o the CPU. Slightly asten

the Bolts (

⑩

) into the holes o the Clip Support or Socket 775

(

⑫

), then asten the Bolts (

⑩

) in an alternating manner until the

Clip (S-Type,

⑨

) is completely pressed against the Clip Support

or Socket 775.

Bolt, ⑩

Clip(S-Type), ⑨

※

The specifications of any product may change without prior notice to improve performance.

⑤⑤

Power Connection (F N M TE 2)

◆

Please re er to “FAN-MATE 2 Installation and Usage” on page 6.

2) MD Socket M2/754/939/940

①①

Thermal Grease pplication

Clear o particles or any residue rom the contact sur ace o the CPU and heatsink. Shake the

Thermal Grease (ZM-STG1,

②

) well then apply on the contact sur ace o the CPU and heatsink base.

②②

Clip Installation

Re er to “The Clip Installation Method” on page 3 to correctly install the Clip or AMD Sockets (

⑦

) and Clip

Lever (

⑧

) on the CNPS9700 according to the orientation o the Retention Frame. First insert the Clip or

AMD Sockets (

⑦

) into the Heatsink (

①

), then connect the Clip Lever (

⑧

) with the Clip (

⑦

③③

Cooler Installation

Place the CNPS9700 on the center o the CPU. Align and connect the Slot o the Clip (

⑦

) with the

Center Lug o the Retention Frame. Press onto the Clip Lever (

⑧

) when aligning the Clip Slot and

Center Lug.

Clip’s Slot

Center Lug

Clip Lever,

⑧

Lever’s Slot

Center Lug

※

The specifications of any product may change without prior notice to improve performance.

10. FAN MATE 2 Installation and Usage

1) FAN MATE 2 Installation Inside a System 2) FAN MATE 2 Installation on the Outside o a System

Connect the two 3-pin connectors o the cable to

the motherboard and to the CNPS9700’s Fan

Connector as shown in the diagram.

Pull the 6-Pin Connector out o the system

through the back and connect it to FAN MATE2,

which should be installed on the case using the

included Double-sided Tape (

⑤

◆The an operates in Silent Mode when the speed control knob o FAN MATE 2 is ully turned in the

counter-clockwise direction. The an operates in Normal Mode when the speed control knob o FAN MATE 2

is ully turned in the clock-wise direction. The an speed can be controlled according to user pre erence

by adjusting the speed control knob.

Note) FAN MATE 2 has been speci ically designed or the an o this product.

Zalman Tech Co., Ltd. is not responsible or any damages to the system or CPU resulting rom its

use with other types o ans.

11. Notes on Usage

1) Checking CPU Compatibility

Please re er to “Compatible CPUs” on page 2 to con irm that your CPU is compatible with the CNPS9700

be ore using it.

2) Caution During Booting

The computer system may automatically shut down when booting the computer a ter the system

monitoring program outputs a warning stating that the CPU an is rotating slowly. In such a case, ully turn

the speed control knob in the clockwise direction be ore rebooting to disable the ‘CPU Fan Detected’

option in BIOS, or set the CPU an’s rotational speed to 1300rpm or lower in the system monitoring

program.

Note) Some motherboards ail to boot i the rotational speed o the CPU an is below a certain rpm.

However, booting can be possible even at low an rpm i the BIOS settings are updated.

For more in ormation on updating your BIOS, please re er to the website o the motherboard’s

manu acturer. There are motherboards which ail to detect the rpm while operating the cooler in

Silent Mode, but this does not a ect computing per ormance.

3) Overclocking

Zalman Tech Co., Ltd. is not responsible or any damages resulting rom CPU Overclocking.

Fan Connector

(CNPS9700)

Motherboard

Double - sided Tape

FAN MATE 2

6-Pin Connector

※

The specifications of any product may change without prior notice to improve performance.

14.

Home Theatre PC Enclosures

TNN Computer Enclosures are the world’s irst environment- riendly noiseless computer enclosures

that operate without the use o a an. TNN Computer Enclosures use the aluminum enclosure itsel

as a heatsink. They are ideal or environments that require silence, as well as or home theatre

systems and multi-media systems.

The HD160 is designed or ultra quiet home theatre

PC operation, utilizing optimized ventilation and

anti-vibration rein orcements, making it ideal or

environments that require silence such as living

rooms, bedrooms, educational acilities, and o ices.

For more information, please visit our website.

13.

TNN (Totally No Noise) Computer Enclosures

TNN 300 TNN 500AF

HD160

Zalman's Noiseless Power Supplies, Fanless Northbridge Coolers, Heatpipe HDD Cooler, Noiseless

Case Fans, VGA Coolers, and Fan Controllers acilitate stable per ormance and a noiseless

computing environment.

12. Zalman Computer Noise Prevention System

Noiseless Power Supply Fanless Northbridge Cooler Heatpipe HDD Cooler

Noiseless Case Fan Ultra Quiet VGA Cooler Fan Controller

Andere Handbücher für CNPS9700 LED

Inhaltsverzeichnis

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN CNPS7500 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C-Cu Bedienungsanleitung

ZALMAN

ZALMAN CNPS14X Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 V2 Kurzanleitung

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

ZALMAN

ZALMAN ZM80D-HP Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR2 Kurzanleitung

ZALMAN

ZALMAN Z8 Bedienungsanleitung

ZALMAN

ZALMAN FX100 Bedienungsanleitung

ZALMAN

ZALMAN ZM500-ST Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Optima (2011) Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Quiet Bedienungsanleitung

ZALMAN

ZALMAN S5 Bedienungsanleitung

ZALMAN

ZALMAN ZM-2HC2 Bedienungsanleitung

ZALMAN

ZALMAN ZM-GWB3 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000C Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AM2 Bedienungsanleitung

ZALMAN

ZALMAN CNPS9900 Max Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung