ZALMAN ZM-WB3 Gold Bedienungsanleitung

Please visit our website and watch the ZM-WB3 Gold installation video for easy installation.

※Please read this manual thoroughly before installation.

※The specifications of this product and its components may change without prior notice to

improve performance.

http://www. alman.co.kr http://www. almanusa.com

Intel Pentium 4

Socket 775 PU

Intel Pentium 4

Socket 478 PU

AMD Duron/Athlon/Athlon XP/Sempron

Socket 462 PU

AMD Sempron/AMD64 (Athlon 64/Opteron)

Socket 754/939/940 PU

ZM-WB3 Gold

User

’’

s Manual

User

’’

s Manual

(English version)

※

The specifications of any product may change without prior notice to improve performance.

3. Exploded View

Bolt

lip

Grip (L-Type)

Fitting

lip Support for Socket 478

PU Water Block

Retention Guide

Bolt

lip

Grip (S-Type)

Fitting

PU Water Block

lip Support Fixing Bolt

lip Support for Socket 775

Motherboard

Backplate for Socket 775

Intel Pentinum 4 - Socket 775 Intel Pentinum 4 - Socket 478

Pure copper Water Block base maximizes cooling performance and gold plating prevents galvanic corrosion.

Intel Pentium 4 (Socket 775/478), AMD Duron/Athlon/Athlon XP/Sempron (Socket 462), and AMD Sempron/AMD64

(Socket 754/939/940) compatible design for broad compatibility.

3) Two types of fittings are provided for use with various kinds of tubes.

1. Features

1) Weight : 260g (Water Block only)

2) Material : Pure opper (Water Block Base), Pure Aluminum (Water Block over)

3) Dimensions : 60(L) x 60(W) x 20(H)mm

4) ompatible Tubes (Outer x Inner) : 13 x 10mm, 13 x 9mm, 12 x 8mm, 11 x 8mm, 10 x 8mm

2. Specifications

1) Test the product for leakage before installation away from the system first. After no leakage is confirmed, proceed with

installation and use.

2) To prevent corrosion, only use coolant that has been approved for computer water-cooling.

3) Only use coolant tubes with compatible specifications.

4) The exposed core of a Socket 462 PU can be damaged due to improper installation. Please read the “Installation”

section thoroughly before installing.

5) Tubes that are not of 12 x 8mm should be used with spare fittings.

6) If interference with components of the mother board is encountered, do not install this product.

7) Keep this product and its associated system away from children.

Zalman Tech o., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper

use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.

recautions

Disclaimer

※

The specifications of any product may change without prior notice to improve performance.

4. Components

1) ommon omponents

①PU Water Block Assembly (ZM-WB3 Gold)

②One (1) lip

③Four (4) Grips (2 each for S-Type and L-Type)

④Four (4) Bolts (Gold; for installing the block)

⑤Two (2) Spare Fittings

⑥One (1) Thermal Grease

⑦Two (2) Tube lamps

⑧User’s Manual (in English and Korean)

2) omponents for Intel Pentium 4 (Socket 775)

⑨One (1) lip Support for Socket 775

⑩One (1) Backplate for Socket 775

⑪Four (4) lip Support Fixing Bolts

3) omponents for Intel Pentium 4 (Socket 478)

⑫Two (2) lip Supports for Socket 478

Bolt

lip

Grip (S-Type)

Fitting

PU Water Block

lip Support A

for Socket 462

Motherboard

AMD Duron/Athlon/Athlon XP/Sempron - Socket 462 AMD Sempron/AMD64 - Socket 754/939/940

Bolt

Small Washer

lip Support B

for Socket 462

Fitting

PU Water Block

Backplate for AMD64

Bolt

lip

Grip (L-Type)

Nipple

Small Washer

Motherboard

❶

❷

❸

❹

❺

❻❼❽

❾󱆌

❿

󱆍

※

The specifications of any product may change without prior notice to improve performance.

4) omponents for AMD Duron/Athlon/Athlon XP/Sempron (Socket 462)

⑬One (1) A-Type lip Support for Socket 462

⑭One (1) B-Type lip Support for Socket 462

⑮Four (4) Bolts (Silver; for fastening the lip Supports)

⒃One (1) set of Washers

5) omponents for AMD Sempron/AMD64 (Socket 754/939/940)

Two (2) Nipples

One (1) Backplate for AMD64

Small Washers (from component 16)

1) Intel Pentium 4 - Socket 775/478

All PUs conforming to Socket 775/478 platform

Caution)

For Socket 478, as shown in Figure 2, a motherboard that is not compliant with the “10.2mm motherboard component

ight restriction” standard, introduced by Intel, may create interference between its components and the Grips of ZM-WB3

Gold. Please do not install the ZM-WB3 Gold if this interference is observed.

2) AMD Duron/Athlon/Athlon XP/Sempron - Socket 462

All PUs conforming to Socket 462 platform

Caution)

This product requires 4 “Heatsink Attach Holes” around the PU

socket, as shown on the right.

3) AMD Sempron/AMD64 - Socket 754/939/940

All PUs conforming to Socket 754/939/940 platform

5. Compatible C U Types

󱆎󱆏 󱆐

󱆑󱆔

󱆒󱆓

10.2mm Motherboard component height restriction

Motherboard omponent

Heatsink Attach Hole

Motherboard omponent

Grip

Figure 1

Compatible

Figure 2

Not Compatible

※

The specifications of any product may change without prior notice to improve performance.

6. Installation

※

ZM-WB3 Gold must be installed with a specific grip that is

compatible with a particular PU socket. Refer to the table

on the right for the correct grip.

1) Intel Pentium 4 - 775

①Installing the lip Support for Socket 775

Align the clip support for socket 775 and the backplate for socket 775 with the mounting holes on the motherboard

and fasten them together using the lip Support Fixing Bolts. The Lever Slot on the lip Support should be properly

oriented on the hinged side of the Socket Lever when installing.

※

The Backplate Support is used for the

convenience of installation.

You can remove it if it is not

deemed necessary.

②Applying Thermal Grease

lean off particles and residue then spread a

generous amount of thermal grease thoroughly

on top of the PU.

※

Unlike the flat-milled base of the FHS, the top surface

of the LGA775 PU may have minute dips and peaks

causing pockets of non-contact between the FHS and

PU. Please apply a generous amount of Thermal

Grease on top of the PU.

③Installing the Grips and Bolts

Interlock the S-type grips with the clip.

Insert the two Bolts into the holes of the Grips.

④Installing the PU Water Block

Set the PU Water Block at the center of the PU.

Screw the Bolts in slightly, then tighten each Bolt a

few turns at a time while alternating between the two

until the Grips are completely pressed against

the lip Support.

Socket

775

478

462

754/939/940

Grip

S-Type

L-Type

S-Type

L-Type

Hole

Inner Hole

Hole

Outer Hole

lip Support Fixing Bolt

Socket Lever Hinge

Socket Lever

Lever Slot

lip Support for Socket 775

Motherboard

Backplate for Socket 775

Backplate Support

Lever

Slot

PU (IHS)

Thermal Grease

Bolt

Grip (S-Type)

PU Water Block

Grip (S-Type)

lip Support for

Socket 775

※

The specifications of any product may change without prior notice to improve performance.

2) Intel Pentium 4 - 478

①Applying Thermal Grease

lean off particles and residue then spread a

generous amount of Thermal Grease

thoroughly

on top of the PU.

②Installing the lip Supports for Socket 478

Install the lip Supports for Socket 478 on both

sides of the Retention Guide as shown in the

diagram on the right.

③Installing the Grips and Bolts

Interlock the L-type Grips with the lip.

Insert the two Bolts into the inner holes of the Grips.

④Installing the PU Water Block

Set the PU Water Block at the center of the PU.

Screw the Bolts in slightly, then tighten each Bolt a

few turns at a time while alternating between the

two until the lip Supports are completely pressed

against the Grips.

PU (IHS)

Thermal Grease

lip Support for Socket 478

Retention Guide

Bolt

Grip (L-Type)

Inner Hole

PU Water Block

Grip (L-Type)

lip Support for

Socket 478

※

The specifications of any product may change without prior notice to improve performance.

3) AMD Duron/Athlon/Athlon XP/Sempron - 462

①Installing the lip Supports for Socket 462

Install the lip Supports for Socket 462 on the motherboard,

while making sure that their locations are not swapped.

※

The A-type lip Support must be installed next to the lever.

Install in the order of : Bolts > Small Washers > Motherboard

Small Washers > lip Supports.

②Applying Thermal Grease

lean off particles and residue then spread a thin

layer of Thermal Grease evenly on the PU core

(Only on the core’s surface that actually makes

contact with the Block Base).

③Installing the Grips and Bolts

Interlock the S-type Grips with the lip.

Insert the two Bolts into the holes of the Grips.

④Installing the PU Water Block

Set the PU Water Block at the center of the PU.

Screw the Bolts in slightly, then tighten each Bolt a

few turns at a time while alternating between the

two until the Grips are completely pressed against

the lip Supports.

lip Support B for Socket 462

Small Washer

lip Support

A for Socket 462

Motherboard

Bolt

lip Support B for Socket 462

Small Washer

Thermal Grease

Bolt

Grip (S-Type)

PU Water Block

lip Support for

Socket 462

Grip (S-Type)

※

The specifications of any product may change without prior notice to improve performance.

4) AMD Sempron/AMD64 - 754/939/940

①Installing the Nipples

Place a Small Washer on the motherboard. Then, put a

Nipple over it and fasten the Nipple until the Backplate

for AMD64 is firmly attached to the motherboard on the

opposite side of the PU.

※ The

Retention Guide is not necessary for installing the

ZM-WB3 Gold on a Socket 754/939/940.

②Applying Thermal Grease

lean off particles and residue then spread a

generous amount of Thermal Grease thoroughly on

top of the PU.

③Installing the Grips and Bolts

Interlock the L-type Grips with the lip.

Insert the two Bolts into the outer holes of the Grips.

④Installing the PU Water Block

Set the PU Water Block at the center of the PU.

Screw the Bolts in slightly, then tighten each Bolt a few

turns at a time while alternating between the two until

the Grips are completely pressed against the Nipples.

PU (Lid)

Thermal Grease

Bolt

Grip (L-Type)

Outer Hole

PU Water Block

Nipple

Small Washer

Motherboard

Backplate for AMD64

Grip (L-Type)

Nipple

※

The specifications of any product may change without prior notice to improve performance.

When building a noiseless computer, use Zalman’s VGA Water Block, Northbridge Water Block, Noiseless

Power Supply, Noiseless ase Fan, Heatpipe HDD ooler, and Fan ontroller for stable performance and

a noiseless Water- ooled system.

7. Zalman Noise revention System

8. TNN (Totally No Noise) Computer Enclosure

The TNN 500AF is the world's first absolutely noiseless, anti-dust computer case for high-end systems that

has been developed with Heatpipe Technology, HS (Heat Source ontact) Power Technology, High

apacity Extrusion Technique, and FMS (Flexible Mounting Structure) Design Technology by ZALMAN

Tech o., Ltd.

The TNN 500AF package includes a high performance aluminum computer case with an absolutely

noiseless cooling solution that does not require the use of a fan, making it ideal for:

1. Digital Audio Workstations (DAW) in broadcasting, recording, and postproduction studio control rooms.

2. Multi Media & Storage Servers for offices, educational facilities, and hotels.

3. Home Theater and Multi- Media Systems for living rooms.

4. High Performance Noiseless Workstations & Servers for SOHO (Small Office Home Office) systems.

For more information, please visit our website.

Northbridge Water Block

Noiseless Power SupplyVGA Water Block Heatpipe HDD Cooler

Noiseless Case Fan Fan Controller

Andere ZALMAN Computerhardware Handbücher

ZALMAN

ZALMAN CNPS 7600 Bedienungsanleitung

ZALMAN

ZALMAN CNPS8000B Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000 Bedienungsanleitung

ZALMAN

ZALMAN ZM-WB5 Plus Bedienungsanleitung

ZALMAN

ZALMAN CNPS6500B-AlCu Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Extreme Bedienungsanleitung

ZALMAN

ZALMAN CNPS9X OPTIMA Bedienungsanleitung

ZALMAN

ZALMAN CNPS9700 LED Bedienungsanleitung

ZALMAN

ZALMAN ZM-MFC1 Combo Bedienungsanleitung

ZALMAN

ZALMAN CNPS7000B Series Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Flex Bedienungsanleitung

ZALMAN

ZALMAN CNPS8700 NT Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN CNPS5700D-Cu Bedienungsanleitung

ZALMAN

ZALMAN ZM-RWB1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Optima (2011) Bedienungsanleitung

ZALMAN

ZALMAN RESERATOR 1 Bedienungsanleitung

ZALMAN

ZALMAN CNPS10X Quiet Bedienungsanleitung

ZALMAN

ZALMAN AMD Athlon 64 Socket 754 CPU Bedienungsanleitung

ZALMAN

ZALMAN CNPS 8000 Bedienungsanleitung

ZALMAN

ZALMAN CNPS7700 LED Bedienungsanleitung

ZALMAN

ZALMAN Reserator 5 Bedienungsanleitung

ZALMAN

ZALMAN CNPS9500 AT Bedienungsanleitung

ZALMAN

ZALMAN FC-ZV9 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

Intel

Intel NUC 12 Pro Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Advantech

Advantech ASMB-935 Series Bedienungsanleitung

Jupiter

Jupiter RAM PACK Bedienungsanleitung