Zebex Z-3191LE Bedienungsanleitung

Product Overview Installation LED Indication

This scanner is a gun type rugged barcode

CCD/Laser scanner with a state of the art scan

engine. Featuring a superb scanning speed and

able to withstand 1.5 meter drop, it is ideal for

manufacturing and logistic sectors.

Logo Plate

LED Indicator

Buzzer

Trigger

Cable Connector

Exit Window

Strap Hol

Package Contents

The package includes the following items:

Gun type CCD/Laser

scanner

Communication

cable

(Model depends on

customer needs)

Quick Reference

Guide

5V Power adapter

(Only for specific

RS-232 cables as

optional accessory.

Model depends on

electrical

requirements of your

geographic location)

1. Connect the interface cable to the

scanner.

2. Connect the cable to the terminal’s

communication port.

3. Connect the power cord to the cable

connector if required.

4. To verify operation, point the scanner at

a barcode and pull the trigger. You

should hear a single beep indicating that

the label has been scanner successfully.

Removing Cable

1. Locate the small hole at the bottom of

the scanner.

2. Use a metallic pin and insert into the

hole.

3. Gently pull the strain-relief of the cable

once a faint “click” is heard.

LED Status Indication

One blue

flash

A barcode has been

successfully decoded

Steady red

(optional for

specific models

only)

The scanner is in

programming mode

Beep Indication

One beep A barcode has been

successfully decoded

Four

consequent

beeps

The scanner has passed

the self-test and is

operating properly

Two

consequent

beeps

This indicates that the

scanner is in

programming mode

Continuous

beep tone

This is a failure

indication. Return the

unit for repair

Scanning Barcodes

1. Ensure all connections are secure.

2. Press the trigger and aim at the barcode

as illustrated.

3. When decoding is successful, the

scanner beeps and the LED indicates

blue.

Correct and incorrect aiming are shown below.

PROGRAMMING CARD

Introduction

This programming card contains only

frequently-used programming bar code labels

used to configure the scanners.

For detailed programming instructions and

safety notices please refer to “Programming

Guide for Handheld CCD/Laser Scanner.”

Important Notice

No warranty of any kind is made in regard to

this material, including, but not limited to,

implied warranties of merchantability or fitness

for any particular purpose. We are not liable for

any errors contained herein nor for incidental

or consequential damages in connection with

furnishing, performance or use of this material.

Specification or version may be subject to

change without notice. The actual specification

and version are based on the product

delivered.

Laser Safety

The laser scanner complies with safety

standard IEC 60825-1 for a Class I laser product.

It also complies with CDRH as applicable to a

Class IIa laser product.. Avoid long term staring

into direct laser light.

Getting Started

Once the scanner is connected, you must

program the scanner to match the interface it is

connected to before barcode data can be

transmitted.

Follow the procedures below to setup the

interface or other features.

1. Scan the ”Start of Configuration” barcode.

2. Scan the barcode of the desired feature.

Multiple features can be enabled/disabled

before scanning the End of Configuration

barcode.

3. Scan the ”End of Configuration” barcode.

*The default parameter values are framed.

Start of Configuration

All program setup

must start with

reading this label

End of Configuration

All program setup

must end with

reading this label to

save any changes

RESET

Reset (return to

factory default)

ABORT

Exit programming

mode with no update

SHOW VERSION

Display firmware

version

Scan the barcode of

the interface you want

to use

USB

RS-232

USB virtual COM

IBM PC/AT/PS/2

Keyboard emulation

Stand-alone

ardKeybo

W tion

rmware

quired)

and emula

(Special fi

may be re

Frequently Used Settings

RS-232 Settings

Baud Rate

19200

9600

800

Parit

Even

Odd

Mark

Space

None

Data Bit

St top Bi

Messa torge Termina

None

CR/LF

H Tab

STX/ETX

USB/Keybo et nard S ti gs

International Keyboard (AL Method)

rdUSA Keyboa

Capital Lock

Off

Message Terminator

None

tEn er

H Tab

Andere Handbücher für Z-3191LE

Inhaltsverzeichnis

Andere Zebex Barcode-Lesegerät Handbücher

Zebex

Zebex Z-3152 Series Betriebsanleitung

Zebex

Zebex Z-5130 Bedienungsanleitung

Zebex

Zebex Z-3191BT Bedienungsanleitung

Zebex

Zebex Z-3100 Bedienungsanleitung

Zebex

Zebex A-50M+ Bedienungsanleitung

Zebex

Zebex Z-3272 Plus Bedienungsanleitung

Zebex

Zebex Z-6070 Series Bedienungsanleitung

Zebex

Zebex Z-3191BT Bedienungsanleitung

Zebex

Zebex Z-3051HS Bedienungsanleitung

Zebex

Zebex Z-3392 Bedienungsanleitung

Zebex

Zebex Z-3130BT Bedienungsanleitung

Zebex

Zebex Z-5252 Bedienungsanleitung

Zebex

Zebex Z-3060 Bedienungsanleitung

Zebex

Zebex Z-3191BT Bedienungsanleitung

Zebex

Zebex ZB-2200AM SERIES Bedienungsanleitung

Zebex

Zebex Z-608 Bedienungsanleitung

Zebex

Zebex z-3101 Betriebsanleitung

Zebex

Zebex z-3101 Betriebsanleitung

Zebex

Zebex Z-5160 Bedienungsanleitung

Zebex

Zebex Z-3392BT Bedienungsanleitung

Zebex

Zebex z3190BT Bedienungsanleitung

Zebex

Zebex Z-3052 Bedienungsanleitung

Zebex

Zebex Z-9000 Gebrauchs- und Pflegehandbuch

Zebex

Zebex ZB- 800 SERIES Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung