Zebex ZB-2200AM SERIES Bedienungsanleitung

USER'S MANUAL

ZB-2200AM

SERIES

The manual can be used as

keyboard emulation, RS- 232C

serial interface, CMOS serial

interface and wand emulation.

IMPORTANT NOTICE

ZEBEX INDUSTRIES INC. MAKES NO

WARRANTY WITH REGARD TO THIS

MATERIAL, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. ZEBEX INDUSTRIES

INC. SHALL NOT BE LIABLE FOR ERRORS

CONTAINED HEREIN OR FOR INCIDENTAL

CONSEQUENTIAL DAMAGES IN CONNECTION

WITH THE FURNISHING, PERFORMANCE, OR

USE OF THIS MATERIALS.

ZEBEX INDUSTRIES INC.

IBM is a registered trade mark of International Business Machines

Corp.

IBM PC/XT is a product of International Business Machines Corp.

IBM PC/AT is a product of International Business Machines Corp.

IBM PS/2 is a product of International Business Machines Corp.

NEC is a registered trade mark of NEC Corporation.

All other registered trade marks are registered companys'

property.

ZEBEX is a registered trade mark of ZEBEX INDUSTRIES INC.

portion of its contents is not allowed without the specific

written consent of ZEBEX INDUSTRIES INC.

Every effort is mode to ensure the accuracy jof our product

information; however, we accept no responsibility for errors

or omissions. Specification or version may be subject to

change without notice. The actual specification and version

are based on the product delivered.

PRINTED IN JANUARY 1998

USER'S MANUAL

The manual can be used as

keyboard emulation, RS- 232C

serial interface, CMOS serial

interface and wand emulation.

IMPORTANT NOTICE

Every effort is mode to ensure the

accuracy jof our product information;

however, we accept no responsibility for

errors or omissions. Specification or

version may be subject to change

without notice. The actual specification

and version are based on the product

delivered.

PRINTED IN JANUARY 1998

TABLE OF CONTENTS

Introduction...................................................1

Default Parameters........................................2

Program Procedure.......................................5

System Setting..............................................6

Scanning Mode Selection...............................7

Header And Trailer........................................7

Inter- Message Delay.....................................8

Inter- Character Delay....................................8

Message/ Block Mode Selection.....................8

Beeper Tone Selection...................................9

Bar Code ID Selection.................................10

RS-232C Serial Communication Parameters

Setting......................................................11

Handshaking Protocol..........................11

ACK/ NAK Response Time Setting.......12

Baud Rate...........................................12

Data Bit...............................................13

Stop Bit...............................................13

Parity Setting.......................................13

Message Terminator............................14

Break Code On/ Off Setting.................17

Keykboard Emulation Parameters Setting....14

Keyboard Type Selection.....................14

Language Selection.............................16

Message Terminator............................17

Function Key Emulation.......................17

Capital Lock Setting.............................17

Reading Code Selection...............................18

Code 39 Parametrs Setting..........................20

Interleaved 2 Of 5 Parameters Setting.........21

Chinese Post Code Parameters Setting.......22

UPC/ EAN/ JAN Parameters Setting............23

Codabar/ Monarch Parameters Setting........26

Code 128 Parameters setting.......................27

MATRIX 25 Parameters Setting...................27

MSI/Plessy parameters setting.....................28

Italian Pharmac Parameters Setting..............30

ISBN/ ISSN Conversion...............................31

Wand Emulation Parameters Setting...........31

Emulation Speed Selection..................32

Emulation Data Output Selection.........32

Appendix A

Code 39 Full ASCII Code Table...................33

Appendix B

Code 39 Full ASCII Bar Code Table.............35

1. INTRODUCTION

The series CCD scanners can be configured by

scanning a series of programming bar code labels.

This allows decoding options and interface

protocols to be tailored to a specific application.

The configuration is stored in non-volatile memory

and will not be lost by removing power from the

scanner.

The scanner must be properly powered before

programming. For RS-232C type scanners, an

external power adaptor must be used to supply

DC power to the scanner. If a keyboard emulation

type scanner is used with a IBM PC/XT/AT, PS/2

or any fully compatible computers, power will be

drawn from the keyboard port. No external power

adaptor is required. If keyboard emulation type

scanner is used with any other non IBM PC

compatible computers, an external power adaptor

may be needed.

During the programming mode, the CCD scanner

will acknowledge a good and valid reading with a

short beep. It will give long beeps for either an

invalid or bad reading.

2. PROGRAMMING OPTIONS

Programmable options are divided into four

groups. The first group includes the options that

show the general behavior of the CCD scanner.

The second group of options governs the

operation of RS-232C type serial ports. The third

group selects the keyboard type that the keyboard

emulation type will be emulated. The last group

sets the decoding parameters for each bar code

symbology.

3. DEFAULT PARAMETERS

This table gives the default settings of all the

programmable parameters. The default settings

will be restored whenever the "Reset"

programming label is scanned and the CCD

scanner is in programming mode.

DEFAULT VALUES OF OPERATING

PARAMETERS

Function Default Values

Scanning Mode Selection Trigger mode

Header and trailer None

Inter-Message delay Normal

Inter-Character delay Normal

Message/Block mode selection Message

Send command in block mode

communication Disable

Good read beeper tone selection 2KHz/120

mSec

Code identifier transmmiting Disable

Code 39 bar code identifier code M

ITF 2 of 5 bar code identifier code I

Chinese post code identifier code H

UPC-E bar code identifier code E

UPC-A bar code identifier code A

EAN-13 bar code identifier code F

EAN-8 bar code identifier code FF

Codabar bar code identifier code N

Code 128 bar code identifier code K

Code 93 bar code identifier code L

MSI bar code identifier code P

MATRIX 25 bar code identifier code G

DEFAULT VALUES OF KEYBOARD EMULATION

PARAMETERS SETTING

Function Default Values

Keyboard type selection IBM PC/AT USA

Message terminator Enter/ carriage

return

DEFAULT VALUES OF RS-232C SERIAL

COMMUNICATION PARAMETERS

Function Default Values

Handshaking protocol None

ACK/NAK response time

setting 300 msec

Baud rate 9600

Data bit 8

Stop bit 1

Parity Mark (None)

Message terminator

selection CR/LF

DEFAULT VALUES OF WAND EMULATION

PARAMETERS

Function Default Values

¡°Wand emulation speed Normal

¡°Wand emulation output Black = High

Note: For wand emulation, the configuration is

only effective for the items with asterisk (¡°).

DEFAULT VALUES OF DECODING

PARAMETERS

Function Code Default Value

Code 39 Enable

ITF 2 of 5 Enable

Chinese Post Code Disable

UPC/EAN/JAN Enable

Codabar Enable

Reading codes ¡°MSI Disable

selection Code 128 Enable

Code 93 Enable

¡°ITAT Disable

¡°EAN-128 Disable

¡°MATRIX 25 Disable

¡° Italian Pharmac Disable

ISSN/ ISBN Disable

Codes Standard

Code 39 Start/stop characters Not transmitting

Check digit Disabled

Concatenation Off

Interleaved Length 6-32 digits

2 of 5 Check digit Disable

Chinese Post Length 10~16 digits

Code Check digit Transmit

Format All

Addendum Disable

UPC-E=UPC-A Disabled

UPC/EAN/JAN UPC-A leading digit Transmit

UPC-A check digit Transmit

UPC-E leading digit Transmit

UPC-E check digit Transmit

Type Standard

Codabar Start/stop characters A,B,C,D

Length 6~32 digits

Code 128 FNC 2 append Disable

Check digit Disable

MSI Length Variable

Check digit Transmit

Italian Pharmac Transmit "A" Character Not transmitting

MATRIX 25 Length Fix 10 digits

Check digit Disable

Note: The configuration of the items with

asterisk (¡°) is effective when being appointed in

advance.

4. PROGRAM PROCEDURE USING BAR CODE

MENUS

START

Rwad Start of

Configuration Label

Set All

Defaults Set

Operating

Parameters

Set

Serial Port

Parameters

Set

Decoding

Parameters

Yes

Read End of

configuration

lable

Re ad Abort

Label

END

Set

Keyboard

Type

Finish Discard

Start of Configuration

•The reading of the "RESET " label turns all the

parameters back to default values.

•When you intend to turn your scanner back to

default parameter, please scan the "Start of

configuration" label first, then scan "RESET"

label and finally scan the "End of

configuration" label.

RESET

•The reading of the "ABORT" label discards all

the parameters read prior to the "End of

configuration".

•The scanner remains in the last interface

mode when the scanner is reset. The lable

below should be scanned if th escanner is

configured the first time.

ABORT

RS-232C

PC/ AT

WAND EMULATION

SHOW VERSION

SCANNING MODE SELECTION

Auto Scan Mode

Testing Mode

Alternate Mode

Repeat Mode

Trigger Mode

DATA REDUNDANT CHECK

Enable

Disable

HEADER AND TRAILER

Header

Trailer

Set

End of Configuration

Start of Configuration

INTER-MESSAGE DELAY

None

100 mSec

INTER-MESSAGE DELAY (Cont’d)

500 mSec

1 Second

INTER-CHARACTER DELAY

None

10 mSec

20 mSec

50 mSec

MESSAGE/BLOCK MODE SELECTION

Message

Block

SEND COMMAND IN BLOCK MODE

COMMUNICATION

Enable

Disable

Store

Set

GOOD READ BEEPER TONE SELECTION

Medium

Low

High

Disable

SOUND DURATION

long(120ms)

Medium(50ms)

Short(20ms)

Very short(5ms)

End of Configuration

Start of Configuration

BAR CODE IDENTIFIER CODE SELECTION

Enable

Disable

BAR CODE IDENTIFIER CODE SETTING

UPC- E

UPC- A

EAN- 13

EAN- 8

Chinese post code

ITF 2 OF 5

Codabar

Code 39

BAR CODE IDENTIFIER CODE SETTING (Cont'

Code 128

Set

Code 93

MSI

MATRIX 25

RS-232C SERIAL COMMUNICATION

PARAMETERS SETTING

HANDSHAKING PROTOCOL

None

RTS/ CTS

ACK/ NAK

Xon/ Xoff

ACK/NAK RESPONSE TIME SETTING

300 mSec

End of Configuration

Start of Configuration

ACK/ NAK RESPONSE TIME SETTING (Cont' d)

2 Sec

500 mSec

3 Sec

1 Sec

5 Sec BAUD RATE

19200

9600

4800

2400

1200

600

DATA BIT

STOP BIT

PARITY

Even

Odd

Mark

Space

End of Configuration

Inhaltsverzeichnis

Andere Zebex Barcode-Lesegerät Handbücher

Zebex

Zebex Z-8072 Bedienungsanleitung

Zebex

Zebex Z-3152 Series Betriebsanleitung

Zebex

Zebex Z-5652 Plus Bedienungsanleitung

Zebex

Zebex Z-3060 Bedienungsanleitung

Zebex

Zebex Z-5160 Bedienungsanleitung

Zebex

Zebex ZB- 800 SERIES Bedienungsanleitung

Zebex

Zebex Z-2130 Bedienungsanleitung

Zebex

Zebex Z-3191BT Bedienungsanleitung

Zebex

Zebex Z-325x Bedienungsanleitung

Zebex

Zebex Z-3192BT Bedienungsanleitung

Zebex

Zebex A-52M Bedienungsanleitung

Zebex

Zebex Z-3051BT Bedienungsanleitung

Zebex

Zebex Z-5652 Bedienungsanleitung

Zebex

Zebex Z-3392BT Bedienungsanleitung

Zebex

Zebex Z-3191BT Bedienungsanleitung

Zebex

Zebex Z-5112 Bedienungsanleitung

Zebex

Zebex Z-3392BT Bedienungsanleitung

Zebex

Zebex Z-3272 Plus Bedienungsanleitung

Zebex

Zebex Z-5252 Bedienungsanleitung

Zebex

Zebex Z-3392 Bedienungsanleitung

Zebex

Zebex Z-3052 Bedienungsanleitung

Zebex

Zebex Z-6070 Series Bedienungsanleitung

Zebex

Zebex Z-8182 Bedienungsanleitung

Zebex

Zebex Z-3052 Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung