• Power Cord: The removable IEC power cord provided with your unit was specifically designed for use
with this product, but other AC cords may be used. Consult your dealer for advice on AC power
cords and high quality wire in your system.
• AC Fuse: The fuse is located inside the IEC power entry connector and is user replaceable. Only
replace fuse with the exact same type that was removed. Only use slow blow fuse. If the unit does
not power up, contact an authorized service representative.
• Wiring: Cables running inside walls should have the appropriate markings to indicate compliance and
listing by the UL, CSA or other standards required by the UL, CSA, NEC, or your local building
code. Questions about cables inside of walls should be directed to a qualified custom installer,
licensed electrician, or low-voltage contractor.
18. RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal
without permission of the copyright holder.
.
8. VENTILATION: Slots and openings in the enclosure create ventilation to protect the component from
overheating. All of these openings must remain unobstructed. Allow at least 12 inches of clearance
above the unit, 1 inch below and an opening behind the unit for airflow. Do not place the unit on a bed,
sofa, rug, built-in bookcase, or rack without adequate ventilation.
9. GROUNDING OR POLARIZATION: As a safety feature, the unit may be equipped with a polarized
alternating current line plug in which one blade is wider than the other and a has an additional
grounding blade. This plug will fit into the power outlet only one way. If you cannot insert the plug fully
into the outlet, try reversing the plug. If the plug still will not fit, contact a licensed electrician to update
your outlet. Do not defeat the safety purpose of the polarized plug.
10. POWER SOURCES: Operate the unit only from the power source indicated on the marking label on the
back of the unit. If you are unsure of the type of power supplied to your home, consult your unit dealer or
local power company.
11. POWER CORD PROTECTION: Arrange power supply cords so that they do not suffer from foot traffic
or pinching by items placed on or against them. Pay close attention to cords where plugs enter the AC
outlet and where they exit from the unit.
12. LIGHTNING: For added protection during a lightning storm or when the component is idle for long
periods of time, unplug the unit from the wall outlet. This will help protect the unit from lightning and
power line surge damage.
13. POWER LINES: Do not locate an outside antenna system in the vicinity of overhead power lines or
other electric light or power circuits. When installing an outside antenna system, take extreme care to
avoid touching the power lines or circuits; contact with them could be fatal.
Warning and Caution
WARNING: The triangle with the lightning flash symbol displayed on the unit advises the user of dangerous
uninsulated voltage inside the product’s enclosure.
CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user-serviceable
parts inside; it is recommended that only qualified personnel service this component.
1. OWNER’S MANUAL: Before powering up the equipment, read all safety and operating instructions and
follow them as instructed. Retain the safety and operating instructions for future reference.
