ZMODO ZMD-NV-SBN4 Bedienungsanleitung
NVR User Manual
For further help, please visit www.zmodo.com
1
®
2
®
Preface
This product series is a 4 or 8 channel embedded NVR with pentaplex functionality: the product will perform
live video preview, recording, playback, remote access, and backup simultaneously. This advanced product
series receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). This video
signal is encoded by the NVR and enabled for recording, viewing, conguring, and playback. This document
mainly focuses on the installation and conguration of NVR LAN application system. With high performance
video, user-friendly GUI, and practical industrial designs; this series NVR is suitable for civil applications such
as homes, stores, internet cafes, and small businesses in addition to mainstream security and surveillance
applications.
Declaration
• The content in this manual may be different from the product version you are using. If you experience any
issue that is not mentioned in this manual, please contact our tech-support or Zmodo Knowledge Base at
kb.zmodo.com.
• The software will be updated as necessary. Our company reserves the right to update without notice.
Target Reader
This manual is primarily intended for the following users:
• System planner
• Onsite tech-support and maintenance personnel
• Administrator for system installation
• Users for business operation
Conventions
• Click: Refers to left-click with your mouse
• Double click: Refers to left-double-click with your mouse
• Right Click: Refers to right-click with your mouse
• Square brackets "[ ]" indicates the window name, menu name and data sheet, such as [Download]
3
®
Catalog
1 INTRODUCTION .......................................................................................................................................4
1.1 Brief Introduction .................................................................................................................................4
1.2 Main Functions and Features ..............................................................................................................4
1.3 Installation Instructions ........................................................................................................................4
1.3.1 Device and Accessories list .........................................................................................................4
1.3.2 Front Panel ..................................................................................................................................5
1.3.3 Rear Panel ...................................................................................................................................5
1.3.4 Remote Controller ........................................................................................................................5
1.3.5 Hard Drive Requirements ............................................................................................................6
1.3.6 Hard Drive Installation .................................................................................................................6
1.3.7 Device Connection .......................................................................................................................7
2 NVR INTERFACE INSTRUCTION ............................................................................................................7
2.1 Login ....................................................................................................................................................7
2.2 Shortcut Menu .....................................................................................................................................8
2.3 Main Menu ..........................................................................................................................................13
2.3.1 Playback ......................................................................................................................................13
2.3.2 INFO ...........................................................................................................................................14
2.3.3 Setting ........................................................................................................................................15
2.3.4 IPC MANAGE .............................................................................................................................24
2.3.5 Advanced Setting .......................................................................................................................24
2.3.6 Backup ........................................................................................................................................21
APPENDIX ..................................................................................................................................................29
3.1 SPECIFICATIONS ................................................................................................................................29
3.2 System Default Values ..........................................................................................................................30
4
®
1 Introduction ▇▅▃
1.1 Brief Introduction
This product series is a 4/8 channel embedded NVR with pentaplex functionality: the product will perform live
video preview, recording, playback, remote access, and backup simultaneously. This advanced product series
receives a high quality video stream that is transmitted digitally by the IP Camera (IPC). This video signal is
encoded by the NVR and enabled for recording, viewing, conguring, and playback. It applies professional
grade, high performance video audio encoding solution, combing with simple, sophisticated UI interface and
practical industry design. Not only for CCTV security which is perfect for home and business. It is simple to
install and operate.
1.2 Main Features
*Supports Mouse & IR Remote Controller;
*Supports Stable Connection with IP camera;
*Supports 4/8-Channel IPC Stream Input and Forwarding;
*Obtain Video Signal from Front-device IP Cameras;
*Supports Multiple Recording Modes;
*Built-in SATA Interface, Supports SATA HDD between 80GB and 2TB of storage;
*Supports USB Backup through USB Flash Disk, and USB Removable Hard Disk;
*Supports Preview & Playback under various Video Resolutions;
*Supports Linkage Channel Audio Alarm, Report to the Alarm Center, and Email Alert;
*Supports TCP/IP Protocol & DDNS;
*Supports Auto Maintain, Software Update and Restore to Factory Defaults.
1.3 Installation Instruction
1.3.1 Device and Accessories List
When you receive the product, please check the equipment and accessories according to the packing list in the
package box.
5
®
1.3.2 Front Panel
Table 0-1 Front Panel Description
Type Name Description
LED
POWER Power indicator: Red, lights when the power is on
HDD Hard disk indicator: Blinks red once per 5 seconds when the hard drive is reading and/or writing;
the HDD indicator is dark when the HDD is not reading or writing.
1.3.3 Rear Panel
Table 0-2 Rear Panel Description
NO. Interface Description
1
VGA Output 1: DIN-15
Alarm Input 4 Channel Input
Alarm Output 1 Channel Output
2
Network Interface 1 : RJ45 10/100M
USB Interface 2: USB 2.0
3RS485 1: Send & Receive Data, half-duplex interface (+ -)
4 power DC 12V
1.3.4 Remote Controller
Table 0- 3 Remote Controller Description
NO. Name Discription
1 Power Turn on/off the device
2 Rec Start/Stop recording
3NO. (1-9)
•Input numbers in the editable box
•One key channel selection in preview mode
•One key channel selection in playback mode, and enlarge the single-
channel screen
6
®
4NO.10+
•Apply for group use to choose channels above 10 in preview mode
•Apply for group use to choose channels above 10 in playback mode,
and enlarge the single-channel screen
5NO.0 Input 0 in the editable box
6Backspace, delete input in the editable box
7Direction: Left
8Direction: Right
9 Direction: Up
10 Direction: Down
11 OK
1) Press to conrm in menu mode
2) Shift key to choose recording type in recording schedule
3) Change the attributes of motion detection area while setting the
areas of motion detection
12 Switch from single screen and multi-screen in preview mode
13 FN
Auxiliary function key:
1)Switch from single screen and multi-screen in preview and playback
mode
2)Enter and exit paste (copy) status in motion detection area setting
and recording mode setting
3)Set the playback start and end points in the video data search
14 MENU Enter the main menu of setting interface
15 ESC Return or exit operations
16 PTZ Enter the PTZ control interface
17 BACKUP Backup video les
18 TV/VGA Switch from TV/VGA Output mode
19 CLEAR Cancel alarm under alarm status
20 SEQ Enable or Disable channel touring according to the touring settings;
Press to pause and restart while touring
21 1. preview mode: pop out playback interface;
2. playback mode: shift between play and pause
22 Playback mode: Stop play
23 Playback mode: 8x, 16x rewind
24 Playback mode: 1x, 2x, 8x, 16x, 1/8, 1/4, 1/2 fast forward
1.3.5 Hard drive Requirements
The hard disk is not included in factory ttings. You may need to purchase SATA hard drive separately. This
NVR only supports SATA hard drive storage between 80G and 2TB.
1.3.6 Hard Drive Installation
1.Open the NVR top cover, take out the damping washers in the screw bag, and then put the 4 damping
washers into the clamping slots (four protruding steps) in the case;
2.Connect the SATA data cable and HDD power cord to HDD;
7
®
3.Lift up the hard drive with your hand, and turn over the case to make sure that the four holes at the bottom
of the case correspond to the hard drive mounting holes, and then x the hard drive using four 4 M3*12 Head
Screws plus plain washers.
4.Connect the SATA data cable and HDD power cord to the backplane.
5.Close the cover, and x the case with screws.
Note1: It is highly recommended to install a DVR-Rate Hard Drive into this NVR in order to ensure that
the Hard Drive can handle continuous use without wearing down and malfunctioning. Please purchase
your Hard Drive from a verified seller to ensure the quality of the hard disk.
Note2: Please format the HDD immediately after installation, or the system will experience a "Hard disk
error" accompanied with an audible alarm.
1.3.7 Device Connection
▲Connect to the Power Supply
You should rst make sure that the AC voltage connected with the NVR power adapter matches with the
requirements. And then connect the power adapter to power input interface of NVR, the power indicator on the
front panel will light on, indicating the power is connected right.
Note: Please use the power adapter included in the package to avoid any damage to the equipment.
▲Network Access
The device provides a standard RJ45 interface, which can easily access the LAN or WAN.
During the network connection, you should provide sufcient bandwidth to ensure the uency and clarity of the
images transmitted over the network.
▲Connect to the Alarm Input and Output Devices
The alarm input device should be the type of GND connected alarm or voltage input alarm, which can be set as
N/O. or N/C.
The requirements of voltage alarm signal input level: low level: 0~2V; high level: 5~15V.
The green angle pins are supplied for access of PTZ and alarm devices. Wiring steps are as below:
1. Pull out the angle pins that inserted in the alarm input and output interfaces;
2. Unscrew the screws using micro Philips screwdriver, insert the signal cable into interface under spring, and
then tighten the screws.
3.Plug in the connected pins into green angle pin socket.
▲Connect to the Video Output Device: VGA Monitor
2. NVR Interface Instruction ▇▅▃
2.1 Login
2.1.1 Starting Up
The Power LED on the front panel will light in red after complete the wiring. Press [Power on/off] button to start
up device. System will rst enter preview screen. The login window will pop up by either pressing [ESC] button
®
8
on front panel or remoter, or right clicking the mouse. Select user and input the corresponding password to
login.
Figure 1 Log in
Note1: Please allow the NVR up to 60 seconds to boot up completely.
Note2: The default password for the Admin username is 111111. The default password for the User
username is Admin. The admin password can be restored to factory default by connecting a metal
paper clip or small metal object to the terminals on the internal motherboard JP1 port. The admin user
can modify the user’s password after login. The system supports up to 16 users, the Admin is the
administrator user with all permissions, whose name cannot be deleted or changed. The Admin user
can add and delete all other users and the permissions corresponding.
Note3: Please follow the procedures to install the hard drive. “No Hard Drive” will prompt if you start up
the device without hard drive, please check the connection between NVR and hard drive if you installed
but still pop out "No hard drive" warnings.
2.2 Shortcut Menu
After login, right click the mouse, you will enter the shortcut menu, as gure 2 shows:
9
®
Now the monitor will show 4 channel video and one vertical menu. Here are functions of the buttons of the
shortcut menu:
[View 1CH]: Single click the button , The right side displays 4 channels( as gure 3), Choose
one channel to view the full image. Click once again to go back to the 4 channel image.
Figure 3
[View 4CH]: Single Click Display all four channel video footage.
[Color Setting]: Click (Figure 4) to choose a channel to alter the color, then adjust the
parameters of brightness, contrast and gray level. You can adjust by dragging the progress bar or clicking "+", "-".
Figure 4 Color Setting
[Play Back]: Click to enter the playback interface as gure 5 shows:
Andere Handbücher für ZMD-NV-SBN4
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere ZMODO Netzwerk-Hardware Handbücher
Beliebte Netzwerk-Hardware Handbücher anderer Marken
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung
Yudor
Yudor YDS-16 Bedienungsanleitung
D-Link
D-Link ShareCenter DNS-320L Bedienungsanleitung
Samsung
Samsung ES1642dc Gebrauchsanweisung
Honeywell Home
Honeywell Home LTEM-PV Montageanleitung
