Zoom Zoom ADSL USB Modem Quick Start guide None Bedienungsanleitung
Quick Start
ADSL USB Modem
This Quick Start contains all the information you should need
to install and use your Zoom ADSL USB modem. Instructions for
both Windows and Macintosh computers are included.
Important! Before You Begin
Before you install your ADSL modem, you must have ADSL
service enabled on your telephone line. To do this, you need
to sign up with an ADSL service provider. Your service
provider may refer to “ADSL service” as “DSL service.”)
Package Contents
Your package contains the items shown below:
The CD contains the installation software, documentation,
warranty, and Customer Support information.
In addition, the package may include:
•Phone-jack adapter to adapt the phone cord to a particular
phone jack (certain countries only)
•ADSL line filter(s) (certain modem model only).
If anything is missing or damaged, please contact Zoom Customer
Support or your retailer or distributor.
Zoom ADSL
USB Modem Software
CD-ROM
Phone Cord USB Cable
2 ADSL USB Modem Quick Start
You Will Also Need
•A Windows 98/98SE/Me/2000/XP or Macintosh computer
equipped with a USB port.
•An ADSL-enabled telephone wall jack to plug the modem into.
3
Quick Start
If you have a Macintosh computer, please go to page 15. If you
have a Windows computer, please continue below.
Step 1: Installing the Software
and Hardware for Windows
1
11
1Make sure that your computer is on.
2
22
2Insert the supplied CD into the CD-ROM drive of your
computer. The CD should start automatically and the
Language Selection screen should appear. (If the CD does
not start automatically, on the desktop, click the Start button,
click Run, and then type D:\setup.exe, where Dis the letter
of your CD-ROM drive.)
3
33
3Select your language. The Main Menu screen then opens.
4
44
4Click Installation Wizard.
5
55
5Click USB to start the software installation, then click Next
when prompted.
4 ADSL USB Modem Quick Start
6
66
6In the Country Selection dialog box, select your country and
click Next. If your country is not listed, select Other.
Depending on your selection, one of the following will happen:
!If your country only has one type of ADSL service, the
Start Copying Files dialog box opens. Go to Step 9.
!If your country has more than one type of ADSL service,
the Service Provider Selection dialog box opens. Go to
Step 7.
!If you selected Other, the Internet Settings Selection
dialog box opens. Go to Step 8.
5
7
77
7If your country has more than one type of ADSL service, the
Service Provider Selection dialog box opens.
Select your service.
If you do not know which service to select, please contact your
ADSL service provider to get the information. If you cannot
or do not want to contact your service provider, we
recommend that you first try the entry labeled (1). If you
cannot connect once you have completed the installation, you
will have to go to page 24 for additional instructions on
changing your settings.
Go to Step 9.
6 ADSL USB Modem Quick Start
8
88
8If you selected Other in Step 6, the Internet Settings
Selection dialog box opens.
Enter the VPI and VCI numbers in their corresponding boxes,
select the Encapsulation Type from the drop-down list, and
click Next.
If you do not know your service provider’s settings, please
contact your provider and ask for them.
9
99
9In the Start Copying Files dialog box, review the settings
displayed. Click the Back button if you want to change
anything, or click Next to begin the installation.
7
10
1010
10 When the installation is complete, click Finish to restart
your computer. As your computer restarts, do the
following:
a
aa
aClick OK when you are prompted to connect the USB
hardware, and then plug one end of the USB cable
into the modem’s USB port and the other end into
your computer’s USB port.
b
bb
bPlug one end of the supplied phone cord into the
modem’s jack labeled LINE and the other end into
the ADSL wall jack.
c
cc
cAs the modem performs a startup sequence, you may
see a Found New Hardware box indicating the
progression of the installation. Typically no user action
is necessary. When the startup sequence is complete,
you will see a message that you have successfully
connected the USB hardware. Depending on your
operating system, you may be prompted to restart your
computer.
8 ADSL USB Modem Quick Start
11
1111
11 If you want to plug a phone in through the modem, you
can do so by plugging it into the modem’s jack labeled
PHONE. If you do this, you should use a filter for that
phone as discussed below.
We HIGHLY RECOMMEND that you install a filter
for EVERY phone and fax that is sharing the ADSL
phone line. (Do not plug a filter between the wall jack
and the modem.) Phone filters block the ADSL
frequencies so that someone making a phone call will not
hear modem noise on the line. Filters also keep phone
conversations from interfering with ADSL performance.
You may have received ADSL phone filters with your
modem. If you did not, or if you need more filters, they
are available at most retail stores that carry consumer
electronics.
To attach a filter, plug the phone or fax machine’s cord
into the filter’s PHONE end and plug the filter’s LINE
end into the wall jack.
Congratulations! You have installed the modem software and
hardware. Now continue with the next section, Configuring Your
Web Browser.
9
Step 2: Configuring Your Web
Browser
The software that you use to make an Internet connection must be
set for a network connection, not a dial-up connection.
This section includes instructions for recent versions of two
popular Web browsers: Internet Explorer Version 5.0 (or later) and
Netscape Navigator Version 7.2. Netscape Navigator instructions
are on page 11, and Internet Explorer instructions are below.
Tip:
If you are using an earlier version of one of these browsers, the
configuration may be slightly different from below. In those
cases—or if you are using another browser altogether—configure
the browser to use a network connection (this might be called a
“Local Area Network” or “broadband” connection).
Configuring Internet Explorer
The following instructions are for Internet Explorer Version 5.0 or
later. (If you do not have this version, you can get a free upgrade
from Microsoft Corp. If you are not sure what version you have,
open Internet Explorer and from the Help menu, choose About
Internet Explorer. The version number is directly below the
Microsoft Internet Explorer logo. You can ignore all the numbers
after the period following the first digit.)
1
11
1On the desktop, right-click the Internet Explorer icon, and
select Properties.
Tip:
If you cannot access Internet Explorer in this way, open your
computer’s Control Panel (click the Start button and then,
depending on your computer, either click Control Panel, or
click Settings and then Control Panel). In the Control Panel,
double-click the Internet Options icon. If this icon does not
appear, double-click the Network and Internet Options icon
and then double-click the Internet Options icon.
10 ADSL USB Modem Quick Start
2
22
2On the Internet Properties dialog box, select the
Connections tab, then click the Setup button.
3
33
3The setup process will proceed differently, depending on your
operating system. The following table details the process for
your Windows computer.
Windows XP Windows 98/Me/2000
a. On the
Welcome to the
New Connection Wizard
dialog box, click Next.
(If you see a Location
Information dialog box,
click Cancel and then
when asked if you are sure
you want to cancel, click
Yes to return to the
Welcome dialog box.)
b. On the
Network
Connection Type dialog
box, select Connect to
the Internet, then click
Next.
c. On the
Getting Ready
dialog box, select Set up
my connection manually,
then click Next.
d. On the
Internet
Connection dialog box,
select Connect using a
broadband connection
that is always on, then
click Next.
e. On the
Completing the
New Connection Wizard
dialog box, click Finish.
a. On the
Internet
Connection Wizard
dialog box, select I want
to set up my Internet
connection manually, or
I want to connect
through a local area
network (LAN), then click
Next.
b. On the
Setting up your
Internet connection
dialog box, I connect
through a local area
network (LAN), then click
Next.
c. On the
Local area
network Internet
configuration dialog box,
uncheck the Automatic
discovery of proxy
server check box, then
click Next.
d. On the
Set Up Your
Internet Mail Account
dialog box select No, then
click Next.
e. On the
Completing the
New Connection Wizard
dialog box, uncheck the
To connect to the
Internet immediately,
select this box… check
box (if it appears) and click
Finish.
Inhaltsverzeichnis
Andere Zoom Netzwerk-Router Handbücher
Zoom
Zoom 4414F Bedienungsanleitung
Zoom
Zoom Gateway/Router V3 Bedienungsanleitung
Zoom
Zoom Zoom ADSL X6 5590 Bedienungsanleitung
Zoom
Zoom 5800F Bedienungsanleitung
Zoom
Zoom 4403 Gebrauchsanweisung
Zoom
Zoom 5524 Bedienungsanleitung
Zoom
Zoom 4504 Bedienungsanleitung
Zoom
Zoom 5360 Bedienungsanleitung
Zoom
Zoom V3 5567 Bedienungsanleitung
Zoom
Zoom WR1096 Bedienungsanleitung
Zoom
Zoom 5624 Bedienungsanleitung
Zoom
Zoom ADSL X3 Bedienungsanleitung
Zoom
Zoom 5651F Bedienungsanleitung
Zoom
Zoom 5352 Bedienungsanleitung
Zoom
Zoom X7N Bedienungsanleitung
Zoom
Zoom ADSL X6 Bedienungsanleitung
Zoom
Zoom V3 1612 Bedienungsanleitung
Zoom
Zoom Zoom ADSL X3 5560 Bedienungsanleitung
Zoom
Zoom 5803 Bedienungsanleitung
Zoom
Zoom X5 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise