ZOSI IPC Bedienungsanleitung
PROFESSIONAL SECURITY MADE EASY
Quick Start Guide
For more information of your new system, please refer to www.zositech.com
Z18.5.T.1
IPC Quick Start Guide --- 1
Zosi Smart App store Google play
1
1. Camera Overview
2. Mounting Camera
To receive the wifi signal
See wider angle
up to 65ft (20m)
Micro SD(Max 64GB)
Durable weatherproof
Wi-Fi antenna
3.6mm lens
24pcs, 5mm LEDs
SD Card Slot
Reset Button
RJ45 Port
Power Port (DC12V/1A)
IP66 Metal Housing
2.1 Camera Connection Diagram
WiFi Camera
Router
Your smart device
Power adapter
2
Mounting surface
Drywall anchors (4)
Mounting screws (4×)
Camera base
Adjustment screw
2.3 To install your camera
1. Use the included mounting
template to mark holes for the
screws. Drill holes for the mounting
screws.
NOTE: Insert the included drywall
anchors if you are installing the
camera in drywall.
2. Connect cables as shown in the
section “Connecting the Camera”
3. Feed the cable through the
mounting surface or cable notch
and mount the camera stand to the
surface using the provided screws.
4. Use a spanner (included) to loosen
the adjustment screw.
5. Adjust the camera position as
demand.
6. Tighten the adjustment screw to
secure the position.
2.2 Before Installing the Camera
A
BC
A. Light Sensor and IR LEDs
B. Adjustment Screw
C. Camera Base
• Decide whether to run the cables
through the wall / ceiling (drilling
required) or along the wall / ceiling.
• If you run the cables along the
wall / ceiling, you must run the
cable through the cable notch on
the base. This will keep the camera
base fasten to the surface when
mounted.
For initial setup, connect the camera to the LAN port of the router by an Ethernet cable.
Then follow the steps below.
Make sure your camera and smart device are connected to the same router.
Cable Notch
ATTENTION
This camera includes an Auto
Mechanical IR Cut Filter.When the
camera changes between Day/Night
viewing modes, an audible clicking noise
may be heard from the camera.This
clicking is normal, and indicates that the
camera filter is working.
3
3. Personal Account Registration
The following instructions are for the Android APP; instructions for the iOS version are
slightly different.
• Start and install the mobile app “Zosi Smart”, which can be downloaded by scanning the
QR Code shown on the front page of this manual ).
• Click “Register now” at the bottom of the interface to register your APP account.
• Enter your e-mail address to get validation code. Click “Next” to set the account password
and complete the registration process.
Note: Please login your email before registration in case you miss the validation code.
Login Interface Registration Login Password Setting
4. Add device(At the first time)
A. Power the device and wait for 20 seconds to proceed with next step
B. Use a RJ45 cable connect the device to the WI-FI router, the WI-FI router is the same
with your smart phone.
C. Connect your smart phone to the WI-FI network of your router
D. Open zosi smart APP, and select the APP icon in the upper right corner, as shown in
the figure
F. Click the ' ' icon to scan the QR on the camera.
E. Click “ ✓” in the upper right corner to save the device adding
4.1 Wired Connection
Scan QR Code
It is default admin
You can set the
name for your
need
Save
Add
device
4
Note: if add the device unsuccessful, please hold the reset button on the camera to reset it,
and then reconnect from steps A to E above, until you can see the video on your phone
Pause for 5 seconds then you can hear crisp switch voice from the switcher inside the
camera, As show in the figure
A. Search the corresponding device shown on device list and enter the real-time preview;
B. Click the “ ” button in the upper right corner to enter device settings
C. Select “Wireless Settings” to proceed with the wireless configuration;
D. Select the WiFi network which has stable and strong signal and enter the WiFi password
accordingly;
E. Click “Confirm” to finish converting the wired connection to wireless connection.
4.2 Convert Wired Connection to Wireless Connection
5
5.1 App Information
5. App Function Introduction
My Information Device Setting
(1) Change Password: modify the login password of the app;
(2) Check for Updates: update your app to the latest version;
(3) Fingerprint Login: no need to enter password if fingerprint touch function is available in
your phone.
5.2 Device Information
(1) Share QR Code of the device;
(2) Video: click to start recording or stop recording;
(3) Screen Shot: click to start screen capture;
(4) Event Playback: click to view the motion detection video and other video stored by the
camera;
(5) SD/HD: adjust sharpness of the image;
(6) Intercom: two-way audio (applicable for device that supports this feature).
Device Information Video Preview
6
The PC Client (AVSS) is applied for DVR/NVR/IPC preview with features like real-time view,
device management, remote video playback and etc.
6. PC Client Remote Monitoring
6.1 Login
Double click the icon “AVSS” to stall the PC Client. Select the language and log in.
Note: Use the default user name and password, or enter the same login information as your
mobile App.
6.2 Device Management
6.2.1 Click “Device Management” to add areas and devices.
6.2.2 Add Area: Right click the blank to add area and enter the name.The Area Name is
used to describe the place being monitored.
7
6.2.3 Add Device: Right click the Area Name to add device and change type of the device.
Enter the device name, device ID, user name, device password and channel number, then
click “OK” to save.
8
6.3 Preview
Click preview to find device list, right click device to Play All and Stop All, preview video can
be displayed or stopped.
6.4 Playback
Click “PlayBack”; select device ID, channel number, date and then search to find the video.
Double click record time to set the exact time and click “Start Play”.
9
1. Why can't I add a device using local search?
A: Make sure that your device is in the same LAN as your phone. If you cannot make
both devices in the same LAN, manually enter the UID of your device to complete the
adding.
2. Why is the device disconnected?
A: Please check:
Is your device connected to the network?
Is the router working properly?
Do you enable the feature of automatically obtaining an IP address?
3. Why can't I find a video recording file?
A: Please check:
Is the SD card damaged?
Is the date of the search file valid?
Is the device system set at the correct time?
FAQ
Inhaltsverzeichnis
Andere ZOSI Sicherheitskamera Handbücher
ZOSI
ZOSI Security Camera Day/Night Bedienungsanleitung
ZOSI
ZOSI C519M Bedienungsanleitung
ZOSI
ZOSI ZG1883M Bedienungsanleitung
ZOSI
ZOSI ZG1883M Bedienungsanleitung
ZOSI
ZOSI C306 PRO Bedienungsanleitung
ZOSI
ZOSI W4 Pro Bedienungsanleitung
ZOSI
ZOSI ZR08GP Bedienungsanleitung
ZOSI
ZOSI C308AH Bedienungsanleitung
ZOSI
ZOSI C190 Bedienungsanleitung
ZOSI
ZOSI ZR08JP Bedienungsanleitung
ZOSI
ZOSI C528M Bedienungsanleitung
ZOSI
ZOSI C611 Bedienungsanleitung
ZOSI
ZOSI C1PRO Bedienungsanleitung
ZOSI
ZOSI C518 Bedienungsanleitung
ZOSI
ZOSI C518 Bedienungsanleitung
ZOSI
ZOSI V6.W.0 Bedienungsanleitung
ZOSI
ZOSI MODEL 4 Bedienungsanleitung
ZOSI
ZOSI C296 Bedienungsanleitung
ZOSI
ZOSI C528M Bedienungsanleitung
ZOSI
ZOSI Z18.5.T.1 Bedienungsanleitung
