Zte MF 910Y Montageanleitung

GETTING TO

KNOW YOUR

TElsTRA

PRE-PAId

4G UsB

WHaT’s

INsIdE

03 Safety first

06 Let’s get started

09 Getting connected

13 Device home page

16 Extra features

17 Problem solving

20 Extra bits you should know

lET’s GET THIs sHOW

ON THE ROad

Your Telstra Pre-Paid 4G USB has been tested to

the highest standards to deliver you the best

possible coverage and speed experience on the

network without equal.

This guide will help you get connected as quickly

and as easily as possible. It’ll guide you through

installation and run through all the handy extra

features that are included.

If all goes to plan you’ll be up and running in no time,

so you can get connected whilst on the move.

saFETY

FIRsT

Please read all the safety notices before using this device.

This device is designed to be used at least 20cm from

your body. Do not use the device near fuel or chemicals or

in any prescribed area such as service stations, refineries,

hospitals and aircraft. Obey all warning signs where posted.

RadIO FREQUENCY saFETY INFORMaTION

The device has an internal antenna. For optimum

performance with minimum power consumption do not

shield the device or cover with any object. Covering the

antenna affects signal quality, may cause the device to

operate at a higher power level than needed, and may

shorten battery life.

3 4

RadIO FREQUENCY ENERGY

Your wireless device is a low-power radio

transmitter and receiver. When switched on it

intermittently transmits radio frequency (RF)

energy (radio waves).

The transmit power level is optimised for best

performance and automatically reduces when

there is good quality reception. Maximum

power is only used at the edge of network

coverage so under most circumstances the

power output is very low. Under poor network

conditions the device transmits at a higher

power, may get hot and have a significantly

shorter battery life.

YOUR PaCKaGE CONTaINs THE FOllOWING:

• Telstra Pre-Paid 4G USB

• Telstra Pre-Paid Next G®SIM card

• Telstra Pre-Paid Welcome Guide

• Getting Started Guide

• USB extension cable

• Manufacturer’s Warranty Card

dEClaRaTION OF CONFORMITY –

sPECIFIC aBsORPTION RaTE (saR)

The wireless device is designed to be used at

least 20cm from the body. We declare that

the product detailed in this manual, and in

combination with our accessories, conform with

the essential requirements of The Radio

Communications Standard (Electro-magnetic IC

Radiation Human Exposure) 2003 and the Australian

Communications and Media Authority Section

376 of the Telecommunications Act 1997 when

used at a distance of not less than 20cm from

the body. The worst case SAR result is published on

the manufacturer’s website at zte.com.au

ROHs dEClaRaTION

(REsTRICTION OF HaZaRdOUs sUBsTaNCEs)

ZTE declares that the Wireless device is free from

hazardous materials and complies with EU directive

2002/95/EC (commonly known as the RoHS Directive)

and the amendments.

lET’s GET

sTaRTEd

N14945

5 6

YOUR TElsTRa

PRE-PaId

4G UsB

lEd INdICaTOR

The LED lights indicate the status of your device and when

you are sending or receiving data.

LED Indicator Status

Red blinking Offline. Not registered on network

Green solid Registered on 4G network

Green blinking Active data transfer on 4G network

Blue solid Registered on 2G/3G network

Blue blinking Active data transfer on 2G/3G network

LED Indicator

Dual Antenna Ports

7 8

GETTING

CONNECTEd

1. INsERT sIM CaRd

• Your SIM card should already be inside the device. Check

to make sure. To remove top cover gently slide back cover.

• To Insert the SIM card, slide in as shown

with the gold chip facing down. Replace cover.

2. sETTING UP YOUR dEVICE

Insert USB into USB port on your PC or other device.

• The Setup Wizard will run automatically and after

a couple of minutes a new desktop icon called Telstra

Pre-Paid 4G USB will be installed.

9 10

3. aCTIVaTE YOUR sIM CaRd

• Activate your SIM card online via telstra.com/activate

You can also activate your SIM via the Device home page.

• To activate via the Device home page click on the desktop

icon called Telstra Pre-Paid 4G USB or enter http://m.home

into a browser.

• Scroll to the bottom of the page and click on Account

Services. Follow the prompts to activate.

If you have any issues activating you can contact our

support centre on 125 8880 or from a non-Telstra phone

call 13 2200 and say “Pre-Paid”.

For more information on activating and managing your

service see your Telstra Pre-Paid Welcome Guide.

4. ENdING YOUR sEssION

• Select Disconnect from the Device home page then

unplug your device.

11 12

• You can double click on the icon or open a browser and

type in http://m.home to manage your connection

settings if required.

If the Setup Wizard doesn’t start automatically then

select Computer from your Desktop or Start Menu.

Select the file AutoRun.exe or the file with a Telstra logo

and follow the prompts.

You are now ready to activate your SIM card.

You can activate, check data usage and change the

settings of your Telstra Pre-Paid 4G USB through

your Device home page.

To access your home page double click on the

desktop icon called Telstra Pre-Paid 4G USB or

enter http://m.home into a web browser.

You can only access the Device home page while

your device is connected.

For full details on using your Device home page,

click on Help, located in the top right of your

home screen.

dEVICE

HOME PaGE

13 14

CHECK daTa UsaGE

• Click on the Information tab from the home screen

then select Record for a summary of usage.

• For a more detailed view, click on ‘Click here to

access your Account Services’.

• Click on ‘Check usage’ or login to My Account.

• You will need a username and password or you may

need to register.

Handy Hint: You need to select the Disconnect button from

the home screen before you can adjust any settings.

add OR CHaNGE sIM PIN

• Click on the Disconnect button on the home screen

to disconnect your device.

• From the Settings tab select Device settings,

then click USIM PIN Management.

• Select Enable, then enter a PIN and click Apply.

15 16

CONNECTING aN EXTERNal aNTENNa

Your Telstra Pre-Paid 4G USB works with a Mimo Dual TS9

port antenna which is available from your retailer. Insert

the connectors carefully to avoid damage to your device.

UsING a MEMORY CaRd (OPTIONal aCCEssORY)

You can also use your device as an external storage drive

when connected via USB.

You will need a microSDHC card (store up to 32GB).

Open the back cover of the device by sliding it down

and insert the memory card as shown.

EXTRa

FEaTUREs

Handy Hint: By default your Pre-Paid SIM card has no

existing PIN.

PROBlEM

sOlVING

HaVING TROUBlE GETTING ONlINE?

There are a number of factors that could prevent you from

connecting to the internet. Try these troubleshooting steps.

1. Install and test the USB device in another computer

2. Check your SIM card is working in another device -

e.g. mobile phone

3. Insert a known working SIM card into your USB device

4. Confirm your account is active - contact Telstra

5. Uninstall the USB device and re-install using

Windows ‘Safe Mode’ - consult a PC technician for

help if required (PC only)

For help topics you can chat to us at livechat.telstra.com

or visit telstra.com/ppmbb

17 18

WaRRaNTY aNd sUPPORT

• All calls and support for PIN numbers, SIM card registration,

account and billing information, network services and other

general enquiries should be directed to Telstra.

• See your warranty card for warranty and service

information.

• For additional information you can access the full user

manual by clicking Help from your Device home page or via

zte.com.au

Call 125 8880 or from a non-Telstra phone call 13 2200

and say “Pre-Paid”.

Inhaltsverzeichnis

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung