Zte MF61 Bedienungsanleitung

ZTE MF61

USB Modem

Product Safety and Warranty Information

User Manual

No part of this publication may be excerpted, reproduced,

translated, or utilized in any form or by any means, electronic

or mechanical, including photocopying and microlm, without

the prior written permission of ZTE Corporation.

ZTE Corporation operates a policy of continuous development.

ZTE Corporation reserves the right to make changes and

improvements to any of the products described in this

document without prior notice.

Release: V1.0

Contents

1. Health and Safety Information ........................................... 1

General Guidelines ............................................................ 1

Aircraft Safety .................................................................... 3

Hospital Safety................................................................... 3

Road Safety ....................................................................... 3

Vehicles Equipped with an Airbag ..................................... 4

Third Party Equipment ....................................................... 4

Efcient Use....................................................................... 4

FCC Compliance ............................................................... 4

Radio Frequency (RF) Exposure ....................................... 6

2. Consumer Limited Warranty .............................................. 8

1. Health and Safety Information

General Guidelines

• Some electronic devices may be susceptible to

electromagnetic interference. Locate the device away

from TV set, radio and other electronic equipment to avoid

electromagnetic interference.

• The device may interfere with medical devices like

hearing aids and pacemakers. Consult a physician or the

manufacturer of the medical device before using the device.

• Please keep yourself at least 20 centimeters away from the

device.

• Do not use your device in dangerous environments such

as oil terminals or chemical factories where there are

explosive gases or explosive products being processed.

• Please use original accessories or accessories that are

authorized by ZTE. Unauthorized accessories may affect

the device performance, damage the device or cause

danger to you.

• Do not attempt to dismantle the device. There are no user

serviceable parts.

• Do not allow the device or accessories to come into contact

with liquid or moisture at any time. Do not immerse the

device in any liquid.

• Do not place objects on top of the device. This may lead to

overheating of the device.

• The device must be used in ventilated environment.

• Do not expose the device to direct sunlight or store it in hot

areas. High temperature can shorten the life of electronic

devices.

• Do not allow children to play with the device.

• Use an antistatic cloth to clean the device. Do not use

chemical or abrasive cleanser as these could damage the

plastic case.

• Use the device within the temperature range of -10°C ~

+55°C, and the storage temperature range is -20°C ~ +65°

C. The humidity range is 5%~95%.

• Do not use your device during a thunderstorm.

• Do not take out your (U)SIM card unnecessarily. The (U)SIM

card may be easily lost or it can be damaged by static

electricity.

• Do not place the device alongside computer disks,

credit cards, travel cards or other magnetic media. The

information contained on the disks or cards may be affected

by the device.

• Do not paint the device.

• Do not drop, throw, or subject the device to rough

treatment.

• Remember to recycle: The cardboard packing supplied with

this device is ideal for recycling.

Aircraft Safety

• Do not use your device before the airplane takes off. In

order to protect airplane’s communication system from

interference, it is never allowed to use the device when

in flight. Get aircrew’s permission if you want to use the

device prior to take-off.

Hospital Safety

• Follow the instructions given by any respective medical

facility regarding the use of Wireless devices on their

premises.

Road Safety

• You must exercise proper control of your vehicle at all

times. Give your full attention to driving.

• Observe all of the recommendations contained in your local

trafc safety documentation.

• Please check if local laws and/or regulations restrict the

use of wireless devices while driving.

• Do not use your device at a refueling point, such as a gas

station, even if you are not refueling your own car.

• Do not store or carry ammable or explosive materials in

the same compartment as the device.

• Electronic systems in a vehicle, such as anti-lock brakes,

speed control and fuel injection systems are not normally

affected by radio transmissions. The manufacturer of

such equipment may advise if it is adequately shielded

from radio transmissions. If you suspect vehicle problems

caused by the radio transmitter in the device, consult your

dealer and do not use the device until your device has been

checked by a qualied technician.

Vehicles Equipped with an Airbag

An airbag inflates with great force. Do not place objects,

including either installed or portable wireless equipment, in

the area over the airbag or in the airbag deployment area. If

in-vehicle wireless equipment is improperly installed and the

airbag inates, serious injury could result.

Third Party Equipment

The use of third party equipment, cables or accessories, not

made or authorized by ZTE, may invalidate the warranty of the

device and also adversely affect the device’s operation.

Efcient Use

For optimum performance with minimum power consumption,

do not cover the device with anything. Covering the device

may cause the device to operate at higher power levels than

needed.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

Caution: Changes or modications not expressly approved by

the manufacturer could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and

receiver.

— Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

— Consult the dealer or an experienced radio/ TV technician

for help.

Radio Frequency (RF) Energy

This model device meets the government’s requirements for

exposure to radio waves.

This device is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF) energy

set by the Federal Communications Commission of the U.S.

Government:

The exposure standard for wireless devices employs a unit

of measurement known as the Specific Absorption Rate, or

SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR

are conducted using standard operating positions accepted

by the FCC with the device transmitting at its highest certied

power level in all tested frequency bands. Although the SAR

is determined at the highest certified power level, the actual

SAR level of the device while operating can be well below the

maximum value. This is because the device is designed to

operate at multiple power levels so as to use only the poser

required to reach the network. In general, the closer you are to

a wireless base station antenna, the lower the power output.

The highest SAR value for the model device as reported to the

FCC when worn on the body, as described in this user guide,

is 1.260 W/kg (Body-worn measurements differ among device

models, depending upon available enhancements and FCC

requirements.)

While there may be differences between the SAR levels of

various devices and at various positions, they all meet the

government requirement.

The FCC has granted an Equipment Authorization for this

model device with all reported SAR levels evaluated as in

compliance with the FCC RF exposure guidelines. SAR

information on this model device is on le with the FCC and

can be found under the Display Grant section of http://www.fcc.

gov/oet/fccid after searching on FCC ID: Q78-ZTEMF61.

Inhaltsverzeichnis

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung

Zoom

Zoom 1070 Series Bedienungsanleitung

Aztech

Aztech HW831 Bedienungsanleitung