Zte MF253M Bedienungsanleitung

MF253M

Let’s go

Getting started with your device

Getting to Know Your Device

Appearance

NOTE:

Please use the original external antenna if necessary.

Interface Description

Lan

Ethernet connections to computer.

Phone

Standard RJ11 connector for telephone.

Reset

To restore factory default configurations.

WPS button

WPS button is used to start Wi-Fi Protected Setup authentication

process.

Power Socket

Connector to the external power supply.

On/Off

Turn the router on or off.

Install the (U)SIM Card

Hold the (U)SIM card with its cut corner oriented as shown and slip it into the card holder.

NOTE:

Your device does not support the micro-SIM card and nano-SIM card or any other nonstandard SIM cards.

To avoid damaging the device, do not use those cards or any card holders.

Indicators

Indicator

State

Description

POWER

Blue ON

Power is on and external power supply is

working normally.

OFF

Power is off or external power supply is

working abnormally.

WIFI

Blue ON

Wi-Fi works normally with no data

transmission.

Blue Blinking

Wi-Fi works normally with data

transmission.

OFF

Wi-Fi works abnormally or the Wi-Fi

function is disabled.

PHONE

OFF

The phone is not in use.

Blue Blinking

The phone is ringing.

Blue ON

The phone is in calling.

SIG

Blue ON

Signal strength is very good or good.

Blue Blinking

Signal strength is weak.

Indicator

State

Description

OFF

There is no signal.

3G/4G

Red

The device is turned on but not registered

to the mobile network.

Blue Blinking

The device is connected to the LTE

network and data is being transferred.

Blue Solid

The device is registered to the LTE

network.

Green Blinking

The device is connected to the 3G network

and data is being transferred.

Green Solid

The device is registered to the 3G network.

LAN

Green ON

The LAN port is connected.

Green Blinking

The LAN port is connected with data

transmission.

OFF

The network cable is not connected.

NOTE:

The phone function needs the network support.

Connecting Your Device

Follow the picture to connect your device.

If you select a different operation mode, the connection of the LAN port is different. Please refer

to the chapter “Accessing the Internet”. If you want to use the mobile network to connect to the

Internet or use your home phone, you need insert your (U)SIM card first.

CAUTION:

Put your device at least 2 meters away from the connected phone, TV sets, radio and other electronic

devices to avoid electromagnetic interference.

Configuring Your PC

The following procedure describes how to configure the Internet Protocol in the Windows 7 operating

system for your Wi-Fi connection.

1. Right-click Network and select Properties.

2. Select Chang adapter settings.

3. Right-click Wireless Network Connection and select Properties.

4. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

5. Select Obtain an IP address automatically and Obtain DNS server address automatically, and

click OK.

Accessing the Internet

Before accessing the Internet, please make sure that the following operations are finished.

Your device is connected via a network cable or Wi-Fi.

Your PC is configured.

To access the Internet:

1) Launch the Internet browser and enter http://192.168.1.1 in the address bar. The login

page appears.

2) Input the password and then click Login. The default password is vivo.

SMS

Manage the SMS, send and receive text messages. You can also set the SMS limit settings.

This function allows you to send or receive short messages.

1. From the Web UI, click the SMS tab to manage messages in the device and SIM card.

2. From the Web UI, click SMS > SMS Settings to set the SMS limit settings.

Validity: Set valid period of outgoing messages.

Center Number: Enter SMS center number. For more information, please contact your

service provider.

Delivery Report: Receive or reject a prompt informing you that the message is delivered to

the recipient.

3. Click Apply to save your settings.

Phonebook

Manage the contacts information.

The phonebook information can be saved in the device or SIM card, and you can choose the

saved position.

From the Web UI, click the Phonebook tab to view, add and delete new contacts.

Settings

Do not modify any settings unless instructed by your service provider.

NOTE:

Please disconnect the router from the network before changing the settings.

Network Settings

Dial-up Settings

After the client is connected to your device successfully, you can access the Internet in the

Automatic, Manual or On Demand mode. The default mode is Automatic.

Mode

Operations

Automatic

Your device is connected to the Internet automatically, and you can surf on the

Internet directly.

Manual

1. Log in to the web GUI configuration page.

2. Select Settings > Network Settings > Dial-up Settings > WAN Connection

Mode > Manual, and then click Apply to confirm your configuration.

Click Home and then click Connect to access the Internet.

On Demand

The Max Idle Time can be defined by the user.

NOTE：

To modify the parameters of your device, log in to the web GUI configuration page by visiting

http://192.168.1.1.

You can also setting Reconnection Mode and Connection Reset to connect to the Internet.

Network Selection

From the Web UI, click Settings > Network Settings > Network Selection，you can change your

network selection as follows:

APN

To connect to the Internet you can use the default Access Point Names (APNs) in Auto/Manual mode,

click Settings > Network Settings > APN.

Create a new APN selecting the Manual mode, then click Add New.

Wi-Fi Settings

Basic settings

From the Web UI, click Settings > Wi-Fi Settings > Basic Settings, the wireless network basic

parameters are shown in the following figure:

Andere Handbücher für MF253M

Inhaltsverzeichnis

Andere Zte Netzwerk-Router Handbücher

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise