Zte MC801A Bedienungsanleitung

1) Signal Indicators: Steady white lights from all 3 indicator lights (from top to bottom) show

signal strength. The more the lights are on, the stronger the signal. If the lights are off, it

may mean that the signal is weak, there is no signal detected or no SIM card has been

inserted.

2) Network Indicator

•Steady red light: No network, no SIM card inserted, no network service or other

problems.

•Steady blue light: Registered or connected to a 3G or LTE network.

•Steady white light: Registered or connect to a 5G network.

3) WiFi Indicator

•Steady white light: WLAN is working normally.

•Light is blinking: WPS function is on.

•Light is off: The WLAN function is off.

4) Power Indicator

•Steady white light : The external power supply is connected and the MC801A’s power

supply is working.

•Light is off: The device is off.

5) WPS button: Short press to turn on the WPS function. Long press (for about 10 seconds)

to turn it off.

6) External antenna connection.

7) Network/LAN port.

8) Power connector: Connects to the power adapter.

9) Nano SIM card slot and reset hole

•Nano SIM card slot: For installing the nano SIM card.

•Reset hole: Long press for about 3 seconds to restore the MC801A to its factory

settings.

How to install the SIM card

Using a nano SIM, insert the SIM card into the MC801A’s card slot in the direction shown

until it clicks into place.

How to turn on the MC801A

After connecting the power adapter, the device will automatically start and connect to the

internet.

How to connect to the internet though the MC801A

•Via WiFi: Open the WiFi (WLAN) settings on your mobile device, select the SSID of

the MC801A and enter the password indicated on the modem’s product label at

the bottom of the device. Once successfully connected, your mobile device can

access the internet.

•Via Network (RJ45)/LAN cable: Connect your computer to any of the LAN ports

behind the modem and your computer and you can access the internet directly.

Configuring the MC801A

Should you wish to reconfigure the modem, you can log in to the device management

page of the MC801A to change the default settings.

1. Check the product label at the bottom of the device to get the device management

page IP address and log in details.

2. Using your computer or mobile device, access IP address using any web browser and

key in the login details at the device management page.

3. Change the MC801A’s settings as required.

Andere Handbücher für MC801A

5

Inhaltsverzeichnis

Beliebte WLAN-Router Handbücher anderer Marken

Milesight

Milesight UG67 Bedienungsanleitung

Airlogic

Airlogic AirSync Class 1 Betriebsanleitung

Samsung

Samsung WCH730B Bedienungsanleitung

TELEFONICA

TELEFONICA USB Adapter Bedienungsanleitung

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Bedienungsanleitung

Askey

Askey RAC2V1K Bedienungsanleitung

Alloy

Alloy WLF2454AP-S Bedienungsanleitung

TP-Link

TP-Link TL-WR542G Bedienungsanleitung

NETGEAR

NETGEAR WNR2000v4 Bedienungsanleitung

Hama

Hama 53120 Bedienungsanleitung

Intellinet

Intellinet 524582 Bedienungsanleitung

Asus

Asus RT-N10P Bedienungsanleitung

D-Link

D-Link DIR-506L Bedienungsanleitung

Sapido

Sapido GR297n Bedienungsanleitung

Asus

Asus DSL-N55U Bedienungsanleitung

AMTC

AMTC WR7502 Bedienungsanleitung

Compaq

Compaq CP-2W - iPAQ Connection Point Bedienungsanleitung

SMC Networks

SMC Networks WBR14-N2 FICHE Bedienungsanleitung