Zte z Bedienungsanleitung
ZTE MF50
Quick Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: http://www.zte.com.cn
E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : R1.0
Confidential and Proprietary Information of ZTE CORPORATION 1
Quick Guide
Introduction
ZTE MF50 is a 3G mobile hotspot device, working in GPRS/EDGE/WCDMA/HSPA network. It provides
Internet connection via USB or Wi-Fi to clients, enabling you to communicate anytime and anywhere.
Specification
Data Service
HSPA:
DL 14.4 Mbps
UL 5.76Mbps
WCDMA CS: UL 64kbps/DL 64kbps
WCDMA PS: UL 384kbps/DL 384kbps
Interface
USB and Wi-Fi
Wi-Fi Standard
802.11b/g/11n
Wi-Fi Security
WEP/WPA/WPA2
USB Version
USB 2.0 HIGH SPEED
USB Interface Type
Micro USB
Weight
80g
Dimensions (W×H×D):
101.8mm*51.8mm*13.65mm
microSD card
Support up to 32GB microSD card
Battery
1500mAh Li-ion battery
*Standby time
100 hours
*Working time
4 hours
Charge time
3 hours
Operate system
Windows 7, Windows Vista, Windows XP (SP2 or later), Mac OS (10.4 or later)
Web Browser
IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0 or later), Chrome
(6.0 or later)
Working temperature
-10℃~ +45℃
Storage temperature
-20℃~ +70℃
Charging temperature
0℃~ +40℃
2 Confidential and Proprietary Information of ZTE CORPORATION
Humidity
5%~ 95%
Notes:
microSD is a trademark of SD Card Association.
The device’s standby and working time are only for your reference, and based on ideal working
environment.
Getting to Know Your Device
The following figure shows the appearance of the device. It is only for your reference. The actual device
may be different.
Interface and Buttons
1.Power
Hold the Power button to switch on/off the device.
2. Internet
Press to connect to or disconnect from the Internet.
Hold for about five seconds to change between manual and automatic
connection.
3.WPS
This button is used to start Wi-Fi Protected Setup authentication process and
enable/disable the Wi-Fi function.
Hold it for about five seconds to activate the WPS process.
Hold it for about two seconds to enable/disable Wi-Fi function.
4. LED Screen
It is to indicate the signal type, signal strength, battery, Wi-Fi, etc.
5.Charger/USB
port
Charge your device.
Connect the client to your device via USB cable.
Notes:
•Press WPS and Power buttons simultaneously, and hold on about three seconds until all LEDs are off,
then release the buttons, the device will restart automatically and restore to the factory default settings.
•Please use the original external antenna if necessary.
Confidential and Proprietary Information of ZTE CORPORATION 3
LED Indicator
When the device is powered on, the following icons will appear on the OLED screen, with the
corresponding indications listed in the table below:
Icon
Indication
Network signal strength.
Network type. 2G or 3G icon will appear on the OLED screen according to the network
being connected.
Roaming network indication.
Connect to the Internet automatically.
Connect to the Internet manually.
Wi-Fi status and number of the connected users.
Battery power indication.
.
Hardware Installation
Inserting SIM Card, Memory Card and Battery
1. Use the thumb catch on the device to open the battery cover.
2. Insert SIM Card into the slot.
4 Confidential and Proprietary Information of ZTE CORPORATION
Warning:
Please power off the device and remove the external power adapter before removing or inserting the
SIM card, if not, the device or SIM card may be damaged.
3. Insert the memory card into the memory card holder.
4. Insert the battery as shown with the contacts located against the gold springs.
5. Line the battery cover up correctly and press gently to close the case.
Confidential and Proprietary Information of ZTE CORPORATION 5
Switching On/Off Your Device
Press and hold the Power button to switch on/off the device.
Notes:
Please install battery before power on.
Charging Your Device
1. Insert the charger lead carefully with the correct orientation to the charger port.
The plug only fits one way. Do not use excessive force to insert the plug.
2. Connect the charger to a mains socket.
3. Disconnect when the battery is fully charged.
Working Mode
Your device supports three working modes. For the client, we only use PC or laptop as the example in this
document.
USB Mode: Connect the device to your PC or laptop via the included USB cable, then power on your
device. And the following picture is one application example:
Wi-Fi Mode: Power on directly, and then connect the device to your PC or laptop via Wi-Fi. And the
following picture is one application example:
6 Confidential and Proprietary Information of ZTE CORPORATION
Mixed Mode: Connect to the device with the above two connection methods.
The following picture is the application example. All of the client devices can surf on the Internet at the
same time.
Establish a connection between your device and the client
Via USB Cable
1.Connect your device and the client with the USB cable.
2.Install software.
After the installation, the connection between your device and the client will be established successfully a
moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize, and then Wi-Fi status icon will
appear on the screen of your device.
2. If the Wi-Fi status shown is , hold the WPS key for about 2 seconds to enable the Wi-Fi function.
3. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes: You need to check your Wireless Network Connection. Set the client to obtain an
IP address automatically in the Internet protocol (TCP/IP) properties, and the client will get
an IP address like”192.168.0.101”.
4. Select the SSID of your device, and then click Connect.
Confidential and Proprietary Information of ZTE CORPORATION 7
Notes:
There will be a pop-up window to require the password. Please check the label on the battery
compartment of your device to gain the SSID and preset password information.
5. Wait a moment, the connection between your device and the client will be established successfully.
Access the Internet
1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet in the Always On or
Manual mode. The default mode is Manual.
Notes:
You can browse the WebGUI Configuration page and click WAN Connection to set the WAN connection
mode.
Access the WebGUI Configuration Page
1. Make sure the connection between your device and the client is correct.
2. Click to Launch the internet browser.
Notes:
It is recommended that you use IE (6.0 or later), Firefox (1.0 or later), Opera (6.0 or later), Safari (3.0
or later), Chrome (6.0 or later)
3.The login page appears as follows.
8 Confidential and Proprietary Information of ZTE CORPORATION
4.View the information of WAN, WLAN and Device. Input the case-sensitive default password
“admin”, and then click Login to access the WebGUI Configuration page.
Notes:
•Do not put anything on the top of your device. Do not lay devices to overlap each other when using.
•The device takes 1~2 minutes to initialize, and attach to the network.
PIN Code Verification
If the PIN code of your SIM card is enabled, you will need to input the PIN code when you login at the
first time.
Notes:
The SIM card will be locked if you enter wrong PIN code consecutively for three times.
If you want to modify the PIN Status, please select Settings > Advanced > PIN Manage to do the
actions.
Quick Setup
After logging in, select Quick Settings, and then the Quick Settings wizard appears.
Inhaltsverzeichnis
Andere Zte WLAN-Router Handbücher
Zte
Zte Mobley Bedienungsanleitung
Zte
Zte Z291DL Bedienungsanleitung
Zte
Zte MF10 Bedienungsanleitung
Zte
Zte ZTE Warp Handbuch
Zte
Zte Unite Bedienungsanleitung
Zte
Zte MF980 Bedienungsanleitung
Zte
Zte Z289L Bedienungsanleitung
Zte
Zte MF612 Bedienungsanleitung
Zte
Zte MC801A Bedienungsanleitung
Zte
Zte MF60 Bedienungsanleitung
Zte
Zte Telstra MF90 Bedienungsanleitung
Zte
Zte ZXHN H268A Bedienungsanleitung
Zte
Zte MF63 Bedienungsanleitung
Zte
Zte MF927U Bedienungsanleitung
Zte
Zte MF253V Bedienungsanleitung
Zte
Zte MF253V Bedienungsanleitung
Zte
Zte Z6200 Bedienungsanleitung
Zte
Zte MF910 Bedienungsanleitung
Zte
Zte Z079584505806 Bedienungsanleitung
Zte
Zte Z288L Bedienungsanleitung
