ZyXEL Communications AG-225H V2 Bedienungsanleitung

AG-225H v2

802.11a/g Wi-Fi Finder & Wireless USB

Adapter

Quick Start Guide

Version 1.00

Edition 1

5/2005

Table of Contents

ENGLISH 1

DEUTSCH 17

ESPAÑOL 35

FRANÇAIS 51

ITALIANO 69

РУССКИЙ 85

SVENSKA 103

繁體中文 119

ENGLISH

1 About Your AG-225H v2

The AG-225H v2 is a wireless adapter that connects to the

USB port on your computer and allows you to search for and

connect to wireless networks. When the AG-225H v2 is not

connected to your computer, you can use the LCD screen to

see details of wireless networks in the area.

2 Overview

The following table describes the AG-225H v2.

Label Name Description

AOFF / ON

switch

Move the switch to the right to turn the

LCD screen on.

Move the switch to the left to turn the

LCD screen off.

ENGLISH

BLINK light If the AG-225H v2 is connected to a

computer and there is a wireless

network connection, this light is on and

blinks when there is traffic.

If the AG-225H v2 is connected to a

computer and there is no wireless

network connection, this light blinks

slowly.

If the AG-225H v2 is not connected to a

computer and the LCD screen is on, this

light is on when the AG-225H v2 is

searching for wireless networks.

CPWR light This light is on if the AG-225H v2 is

connected to a computer or the LCD

screen is on.

D LCD screen The LCD screen displays details of

available wireless networks one at a

time. See section 3for more details.

Label Name Description

ENGLISH

ESEEK button When the LCD screen is on, use this

button to have the AG-225H v2 search

for available wireless networks or

change detection modes.

• To search for available wireless net-

works, press the SEEK button once.

• To change detection modes, hold the

SEEK button down for one second.

Then, press the SEEK button once

to display available networks in that

mode. See section 3for more

details.

FNEXT button When the LCD screen is on, use this

button to scroll through the list of

available wireless networks.

Label Name Description

ENGLISH

3 The LCD Screen

When the AG-225H v2 is not connected to a computer, you

can use the LCD screen to display details of available

networks.

The following table describes the labels in this figure.

Label Name Description

A SSID The SSID is the name of a wireless network.

When an SSID is longer than 12 characters

it scrolls automatically.

B Channel This displays the wireless channel of the

network.

C Entry This displays the number of the network in

the list. The AG-225H v2 can detect up to 15

networks at any one time.

ENGLISH

D Power This icon displays when the battery is

low.

This icon displays when the battery is

fully charged.

E Detection

Mode

This shows the way networks are detected

and listed. See section 2 for details of how to

change detection modes.

Signal mode displays all available

networks in order of signal strength.

Each time you turn the AG-225H v2

on, it uses Signal detection mode.

Free mode displays only networks

with no security enabled.

Dedicated mode displays a single

selected network.

Use the NEXT button in Signal or

Free detection mode to select a

network. Then, change to Dedicated

mode and press the SEEK button

once. The AG-225H v2 regularly

scans the selected network and

updates the display.

Label Name Description

ENGLISH

4 Power

Recharge your AG-225H v2 by connecting it to the USB port

of your computer. See section 5.3 for more details.

Your AG-225H v2 will switch off automatically after 90

seconds of inactivity to conserve power. Press the SEEK

button to switch it back on.

F Security This displays the wireless encryption

settings of the selected network.

displays when no security is enabled.

displays when WEP security is

enabled.

displays when WPA or WPA2 security

is enabled.

G Signal This displays the wireless standard and

signal strength of the selected network.

displays when a network is using the

802.11a standard.

displays when the network is using the

802.11b standard.

displays when the network is using the

802.11g standard.

Label Name Description

ENGLISH

5 The ZyXEL Utility

The installation procedures are similar for all supported

Windows versions.

5.1 Installation Requirements

Before installation, make sure you have a computer with the

following:

• Pentium II 300MHz or above

• A USB port (with USB1.0/1.1 the AG-225H v2 can transmit at

up to only 11Mbps)

• A minimum of 20 MB available hard disk space

• A minimum of 64 MB RAM

• A CD-ROM drive

• Windows 2000 or Windows XP

5.2 ZyXEL Utility Installation

1Insert the included CD into the CD-ROM drive on your

computer. When the following screen displays, click

Install the ZyXEL utility before you insert the AG-

225H v2

If you have already installed Funk Odyssey Client

software on the computer, uninstall (remove) it.

ENGLISH

Setup. If the screen does not display, locate and double-

click autorun.exe.

2Select Install Utility

3The following screen displays. Click Next.

4Select Driver and Utility to install both ZyXEL utility and

driver on your computer. If you want to install the driver

only and use Wireless Zero Configuration (WZC) with

Windows XP, select Driver only (see Note for Windows XP

Andere Handbücher für AG-225H V2

Inhaltsverzeichnis

Sprachen:

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications omni.net D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ISDN Terminal Adapter Omni.Net Lite Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications DMA-1000 Series Handbuch

ZyXEL Communications

ZyXEL Communications OMNI.NET LITE Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD7605 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-470 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD217N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-220 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications NWD-210N - V1.0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-120 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AG-225H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-302 V3 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-302 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-102 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-270S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-160 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung