ZyXEL Communications PLA450 Series Bedienungsanleitung

ZyXEL Confidential

ZyXEL

Firmware Release Note

PLA-450

Release 3.60(AAJ.2)C0

Date: 11/13/2007

Author: Edward Yang

360AAJ2C0(Release).doc 1/18

ZyXEL Confidential

ZyXEL PLA-450 Standard Version

release 3.60(AAJ.2)C0

Release Note

Date: 11/13/2007

Supported Platforms:

ZyXEL PLA-450

Versions:

ZyNOS Version: V3.60(AAJ.2) | 11/13/2007

Bootbase Version: V1.01 | 05/08/2007 12:40:00

Notes:

1. To conform to the local policy, some countries are not allowed to use 802.11g Turbo

mode. These countries are: Argentina, Brazil, Ecuador, Japan, South Korea, and

Malaysia. The function will be disabled automatically despite the device settings.

2. We support up to 27 concurrent WLAN STAs at the same time if WPA-PSK was

used.

3. The firmware 1-4-5 of HomePlug can not communication with 3-x-xxxx.

4. The firmware of HomePlug is automatically upgraded to 3-0-3052, and support

Encrypt button.

5. In HomePlug network, two stations A and B form a network. If A left the network by

Encrypt button, B is still in the network after using Encrypt button to leave network.

So B can not join another network before leaving.

6. In WPS function, PLA-450 supports WPA-PSK+TKIP and WAP2-PSK+AES, not

support WPA-PSK+AES and WPA2-PSK+TKIP.

Known Issues:

1. HomePlug LED lights up even if it’s not within any management network.

2. The priority mapping can’t be disabled even you set “None” to Homeplug QoS

Priority Mapping.

3. The Homeplug Rx statistics may not be updated at the first moment when you just

power it on.

4. When WPS disabled. The WPS LED still light with green.

360AAJ2C0(Release).doc 2/18

ZyXEL Confidential

Features:

Modification in V3.60(AAJ.2) | 11/13/2007

Change 3.60(AAJ.2)b3 to 3.60(AAJ.2) FCS version.

Modification in V3.60(AAJ.2)b3 | 11/08/2007

1. [BUG FIXED]

SPR: 071030688

Symptom: Disable the wireless function. DUT wireless LED still light and STA still could

connect to DUT

Condition: Disable the wireless function. DUT wireless LED still light and STA still could

connect to DUT

2. [BUG FIXED]

SPR: 071031851

Symptom: In HomePlug Qos page. The number 8 priority only showed Highest

Condition:

1. In HomePlug Qos page. Full keyin the port or MAC address in MAC address or IP Port

number Priority page.

2. The number 8 priority was High, Mid or Low and apply

3. The number 8 priority still showed Highest

3. [BUG FIXED]

SPR: 071107456

Symptom: WPS LED light while WPS "Push Button" process finish

Condition:

1. Load to default setting

2. Press WPS "Push Button" to go WPS process

3. No Wireless STA to associate DUT via WPS

4. WPS LED is still light after WPS process finish(DUT WPS status= Unconfigur)

Modification in V3.60(AAJ.2)b2 | 10/25/2007

1. [BUG FIXED]

SPR: 071002054

Symptom: HomePlug QoS tab should be removed from "Basic" mode

Condition:

1. HomePlug QoS tab should be removed from "Basic" mode

2. [BUG FIXED]

SPR: 071002059

Symptom: HomePlug's "QoS" tab is gone in other language

Condition:

1. HomePlug's "QoS" tab is gone in other language

360AAJ2C0(Release).doc 3/18

ZyXEL Confidential

3. [BUG FIXED]

SPR: 071008470

Symptom: Wireless Super G throughput is under Criterion

Condition:

1. In wireless Super G throughput, Rx(Client to AP) throughput is under criterion(<20 Mbps)

2. Please reference the PQA test report

Modification in V3.60(AAJ.2)b1 | 10/03/2007

1. [FEATURE ENHANCED]

Support WPS.

2. [FEATURE ENHANCED]

Support Homeplug QoS.

3. [BUG FIXED]

SPR: 070914885

Symptom: In WPS function, DUT can accept security = WPA2-PSK + TKIP

Condition:

1. Use Vista as wired external registrar, and Ralink as the enrollee

2. Use Vista to config DUT with WPA2-PSK(TKIP) via WPS, DUT can accept

3. Use Vista to config Ralink via WPS(PIN method)

4. After WPS process(step3) finish, Ralink can't associate to DUT.(Ralink utility show DUT

profile that security= WPA2-PSK with TKIP )

4. [BUG FIXED]

SPR: 070914884

Symptom: Use PIN method via wired external registrar, WPS security = "No security" was

failed

Condition:

Use PIN method via wired external registrar, WPS security = "No security" was failed

5. [BUG FIXED]

SPR: 070914879

Symptom: Only enable or disable the Intra-BSS function and apply. The Message was

showed "Nothing changed; no need to perform save"

Condition:

Only enable or disable the Intra-BSS function and apply. The Message was showed

"Nothing changed; no need to perform save"

Modification in V3.60(AAJ.1) | 09/20/2007

Change 3.60(AAJ.1)b2 to 3.60(AAJ.1) FCS version.

Modification in V3.60(AAJ.1)b2 | 09/19/2007

1. [BUGFIX]

SPRID: 070914888

Symptom: In WPS function, DUT can hyperlink the Upnp and HTTP function

360AAJ2C0(Release).doc 4/18

ZyXEL Confidential

Condition:

1. In WPS function, DUT can hyperlink the Upnp and HTTP function.

2. But, DUT couldn't find Upnp and HTTP function in eWC

3. Upnp function should find and setting in Maintence

4. Hpyerlink HTTP should be removed

Modification in V3.60(AAJ.1)b1 | 09/07/2007

1. [FEATURE ENHANCED]

Support WCN (Windows Connect Now)

2. [FEATURE ENHANCED]

Improvements on GUI multilingual selection.

3. [FEATURE ENHANCED]

HomePlug support for Intellon v3.0 functionality

1. FW/BIP upgrade (Led blink when fw upgrade during initial time)

2. Push-button security and sync issue

Modification in V3.60(AAJ.0) | 05/31/2007

Change V3.60(AAJ.0)b5 to V3.60(AAJ.0) FCS version.

Modification in V3.60(AAJ.0)b5 | 05/28/2007

2. [BUGFIX]

SPRID: 070525345

Symptom: Accounting server function couldn't work

Condition: In GUI, users set the RADIUS accounting port as 1813 and save it, go to status

page and back, the RADIUS accounting port as "0". And couldn't accounting athentication

successful on accounting server

Modification in V3.60(AAJ.0)b4 | 05/21/2007

1. [BUGFIX]

SPRID: 070518945

Symptom: DUT couldn't add member from My HomePlug Network.

Condition:

1. Add no member DUT from My HomePlug Network list

2. Keyin the Nickname and DAK Password, click the apply

3. DUT showed ret_code=5 error message and couldn't add the not member DUT

Modification in V3.60(AAJ.0)b3 | 05/15/2007

360AAJ2C0(Release).doc 5/18

ZyXEL Confidential

1. [BUGFIX]

SPRID: 070425160

Symptom: Edit the MAC Address in Out of network DUT or Active DUT. DUT add new MAC

Address in My HomePlug Network list. It should only change the MAC Address

2. [BUGFIX]

SPRID: 070426291

3. [BUGFIX]

SPRID: 070411490

Symptom: When some functions were empty. DUT showed wrong message

Condition:

1. Authentication Sever or Accounting Sever--> Port Number

2. When port number was empty and apply

3. DUT's status showed "An error was detected on this page…."

4. Roaming port, RTS/CTS, Fragmentation, Manual New Time, Manual New Date had the

same issue

4. [BUGFIX]

SPRID: 070502035

Symptom: In Chinese language, please help to change "移至基本設定" to "進入基本設定"

while user login the system.

Condition:

1. While user login system, system ask user to select one hyper-link to enter system.

2. In Chinese language, please change "移至基本設定" to "進入基本設定"

5. [BUGFIX]

SPRID: 070502037

Symptom: In Chinese language, it show "HomePlug AV (影音)" in the interface status of the

status page

Condition:

Please change the "HomePlug AV (影音)" to "HomePlug AV"

6. [BUGFIX]

SPRID: 070502036

Symptom: In Chinese language, it show "成員行動"(Member Action) in the HomePlug table.

Condition:

1. In Chinese language, it show "成員行動"(Member Action) in the HomePlug table.

2. It is very strange, please help to modify it.(Maybe "編輯成員" or else)

7. [GUI CHANGE]

To refine the GUI Homeplug strings.

Modification in 3.60(AAJ.0)b2 | 4/16/2007

1. [BUGFIX]

SPRID: 070410417

Symptom: GUI--> LAN--> Get form DHCP Server. Changed "form" to "from"

360AAJ2C0(Release).doc 6/18

ZyXEL Confidential

Condition:GUI--> LAN--> Get form DHCP Server. Changed "form" to "from"

2. [BUGFIX]

SPRID: 070410424

Symptom: Only changed the Gateway IP address and apply. DUT showed wrong message

Condition:

1. GUI--> LAN--> User Defined LAN IP

2. Only changed the Gateway IP address and apply

3. DUT showed "Nothing changed; no need to perform save" message

Modification in 3.60(AAJ.0)b1 | 4/9/2007

First firmware release.

CI Command List:

Appendix A CI Command List

Last Updated: 2007/4/3 Command Class List Table

System Related Command Exit Command Device Related Command

Ethernet Related Command POE Related Command PPTP Related Command

Configuration Related Command IP Related Command Modem Dialup Command

Firewall Related Command Wireless LAN Related Command Bridge Related Command

Radius Related Command 802.1x Related Command HomePlug Related

Command

SystemRelatedCommand Home

Command Description

sys

atsh Display system MRD and checksum

callhist

add phone dir rate uptime Add a entry in call history

display display call history

remove <index> remove entry from call history

countrycode [countrycode] set country code

datetime

date Display system date year/month/day

time Display system time hour/minute/second

period The period to synchronize with time server

sync sync with time server

domainname display domain name

edit <filename> edit a text file

feature display feature bit

hostname [hostname] display system hostname

360AAJ2C0(Release).doc 7/18

ZyXEL Confidential

logs

category

8021x [0:none/1:log] [0:don't show

debug type/1:show debug type] record the 8021x logs

access [0:none/1:log/2:alert/3:both]

[0:don't show debug type/1:show debug

type]

record and alert the access control logs

attack [0:none/1:log/2:alert/3:both]

[0:don't show debug type/1:show debug

type]

record and alert the firewall attack logs

display display the category setting

error [0:none/1:log/2:alert/3:both]

[0:don't show debug type/1:show debug

type

record and alert the system error logs

icmp [0:none/1:log] record the icmp logs

javablocked [0:none/1:log/2:alert/3:both]

[0:don't show debug type/1:show debug

type]

Record and alert the java etc. blocked logs

mten [0:none/1:log] [0:don't show debug

type/1:show debug type] record the system maintenance logs

packetfilter [0:none/1:log] [0:don't show

debug type/1:show debug type] record packet filter logs

ppp [0:none/1:log] [0:don't show debug

type/1:show debug type] record PPP logs

cdr [0:none/1:log] [0:don't show debug

type/1:show debug type] record CDR logs

remote [0:none/1:log] [0:don't show

debug type/1:show debug type] record Remote Management logs

tcpreset [0:none/1:log] [0:don't show

debug type/1:show debug type] record tcp reset logs

traffic [0:none/1:log] [0:don't show

debug type/1:show debug type] record traffic logs

upnp [0:none/1:log] [0:don't show debug

type/1:show debug type] record upnp logs

urlblocked [0:none/1:log/2:alert/3:both] record and alert the web blocked logs

urlforward [0:none/1:log] record web forward logs

wireless [0:none/1:log] [0:don't show

debug type/1:show debug type] record wireless logs

anyip [0:none/1:log] record anyip logs

clear clear log

mten|urlblocked|urlfor

ward]

display all logs or specify category logs

errlog

clear display log error

disp clear log error

Online on/off turn on/off error log online display

load load the log setting buffer

mail

alertAddr [mail address] send alerts to this mail address

display display mail setting

logAddr [mail address] send logs to this mail address

schedule display display mail schedule

schedule hour [0-23] hour time to send the logs

360AAJ2C0(Release).doc 8/18

ZyXEL Confidential

schedule minute [0-59] minute time to send the logs

schedule policy

[0:full/1:hourly/2:daily/3:weekly/4:none] mail schedule policy

schedule week

[0:sun/1:mon/2:tue/3:wed/4:thu/5:fri/6:sa

weekly time to send the logs

server [domainName/IP] mail server to send the logs

subject [mail subject] mail subject

auth 0/1 Enable/Disable SMTP authentication

user Set SMTP user name

passwd Set SMTP password

save save the log setting buffer

syslog

active [0:no/1:yes] active to enable unix syslog

display display syslog setting

facility [Local ID(1-7)] log the messages to different files

server [domainName/IP] syslog server to send the logs

load <entry no.> load remote node information

disp <entry no.>(0:working buffer) display remote node information

nat <none|sua|full_feature> config remote node nat

nailup <no|yes> config remote node nailup

mtu <value> set remote node mtu

save [entry no.] save remote node information

stdio [minute] change terminal timeout value

trcdisp monitor packets

trclog

trcpacket

version display RAS code and driver version

view <filename> view a text file

wdog

switch [on|off] set on/off wdog

cnt [value] display watchdog counts value: 0-34463

romreset restore default romfile

pwderrtm [minute] Set or display the password error blocking

timeout value.

upnp

active [0:no/1:yes] Activate or deactivate the saved upnp settings

config [0:deny/1:permit] Allow users to make configuration changes.

through UPnP

display display upnp information

firewall [0:deny/1:pass] Allow UPnP to pass through Firewall.

load save upnp information

reserve [0:deny/1:permit] Reserve UPnP NAT rules in flash

save save upnp information

active [0:no/1:yes] Active to enable quick engine

state

debug

acl

display

add

360AAJ2C0(Release).doc 9/18

ZyXEL Confidential

delete

reset

session

display

add

delete

reset

route

display

add

delete

reset

arp

display

add

delete

reset

bridge

display

add

delete

reset

bltlookup

config [0: off | flags],

socket display system socket information

filter

netbios

disp Display NetBIOS Filter Status

Config <0:Between LAN and WAN,

3:IPSec pass through, 4:Trigger Dial>

<on|off>

Set NetBIOS Filter Status

roadrunner

debug <level> enable/disable roadrunner service

0: diable <default>

1: enable

display <iface name> display roadrunner information

iface-name: enif0, wanif0

restart <iface name> restart roadrunner

ddns

debug <level> enable/disable ddns service

display <iface name> display ddns information

restart <iface name> restart ddns

logout <iface name> logout ddns

cpu

display display CPU utilization

ExitCommand Home

Command Description

exit exit smt menu

DeviceRelatedCommand Home

Command Description

dev

360AAJ2C0(Release).doc 10/18

Andere Handbücher für PLA450 Series

Inhaltsverzeichnis

Andere ZyXEL Communications Adapter Handbücher

ZyXEL Communications

ZyXEL Communications NWD-370N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-400 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA6457 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA5205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR G-405 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications OMNI LAN PCI G1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-210H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA6456 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyAIR B-420 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications 802.11g Wireless USB Adapter ZyXEL G-200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NWD-271N - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-402 V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4205 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA4215 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications NWD-170N Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications FN312 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-220 V2 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung