Insert two radome brackets into the slots on the inner case's back
panel.
Use A, B and C to attach the bracket to the AP.
Note: Make sure the AP is turned off. Disconnect the PoE injector from the
power outlet.
Weatherproof Enclosure Kit
Mounting Kit (Sold Separately)
1
2
ENEN
Seal the inner case's wall mounting holes with two rubber plugs.
Repeat steps 3-7 of the Weatherproof Enclosure Kit Wall Mounting
QSG to prepare the AP for pole mounting.
ENEN
ENGLISH
AP and Rotating Bracket Assembly
Mounting Preparation
Repeat
Weatherproof Enclosure Kit
Wall Mounting QSG Steps 3 7~
x 2
1
x 2
1
2
Copyright © 2019 Zyxel Communications Corp. All Rights Reserved.
2/2 See the User’s Guide at www.zyxel.com for more information, including customer support and safety warnings.
Quick Start Guide
A
B
C
A
B
C
M6 Washers
x2
Hex Nuts
x2
M6 Spring Washers
x2
