ZyXEL Communications AMG1202-T10A Bedienerhandbuch

www.zyxel.com

Quick Start Guide

AMG1202-T10A

Wireless N-lite ADSL2+

4-port Ethernet Gateway

Firmware Version 1.00

Edition 1, 2/2011

DEFAULT LOGIN DETAILS

LAN Port LAN1 ~ LAN4

IP Address http://192.168.1.1

Username admin

Password 1234

2011 ZyXEL Communications Corporation

Device Panels

Ethernet

LEDs 1-4

DSL

Internet

LED

Power LED

Power

Power Reset DSL Port

WPS/WLAN

Ethernet

Ports 1-4

WLAN/

WPS LED LED

Switch

Socket Button

Button

Introduction

The AMG1202-T10A is an ADSL router with a four-port built-in Ethernet

switch and IEEE 802.11n wireless capability. The AMG1202-T10A

allows wired and wireless clients to safely access the Internet.

Overview

•Before You Begin, on page 4

•Hardware Connections, on page 5

•Initial Configuration, on page 7

•Set Up a WPS Connection, on page 11

LAN

WAN

ADSL

INTERNET

AMG1202-T10A

Before You Begin

Make sure you have the following things before you start.

•INTERNET ACCESS: You need an Internet account with an ISP

(Internet Service Provider) and information such as user name,

password, and so on.

•WEB BROWSER: Internet Explorer 6.0 and later versions, with

JavaScript enabled, or Mozilla Firefox 3 and later versions or Safari

2.0 and later versions. The browser will be used to access the

Internet and/or access the AMG1202-T10A Web Configurator.

See the User’s Guide for all configuration details including file sharing and setting

up a shared printer.

To read the User's Guide insert the CD that came in the box into your

CD-ROM drive. A screen should pop up. Navigate to the User's Guide

from this screen. If a screen does not pop up, open Windows Explorer

(click My Computer), click on the CD-ROM drive (usually drive D) and

navigate to it from there.

NNECTION

Hardware Connections

Remove any clear plastic covers from the AMG1202-T10A before

using it.

1. DSL: Use a telephone wire to connect this port to a telephone jack (or

the DSL or MODEM jack on a splitter, if one is already installed).

2. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this

port for initial configuration and/or Internet access.

3. Use the power adaptor provided with your AMG1202-T10A to

connect an appropriate power source to this socket.

4. Push the power switch to the on position.

Checking the LEDs

Look at the LEDs at the front panel of the AMG1202-T10A.

• The POWER LED blinks during start-up and is green once the

AMG1202-T10A is ready.

• Each ETHERNET LED turns on if the corresponding ETHERNET

port is properly connected. The LEDs blink when the AMG1202-

T10A is sending or receiving data through the corresponding

ETHERNET port.

• The DSL LED stays on if a physical DSL connection exists.

• The INTERNET LED is green when Internet access is available and

blinks when transmitting data.

• The WLAN/WPS LED stays green when the wireless LAN is ready.

It blinks when the AMG1202-T10A is sending/receiving data through

the wireless LAN.

#If none of the LEDs are on, check your connections. Make sure that you have

the power adaptor connected to the AMG1202-T10A and plugged into an

appropriate power source. Make sure the power source is turned on. Turn the

AMG1202-T10A off, wait for a few seconds and turn it back on. If the LEDs

are still off, contact your local vendor.

URATIO

Initial Configuration

Enter the information in the wizard exactly as given by your ISP. If no

information was given for a field in the wizard, leave it to the default.

Open a web browser on the computer.

Type "http://192.168.1.1" as the website

address.

Enter "1234" (default) as the password

and click Login.

The following screen displays if you have

not yet changed your password. It is

strongly recommended you change the

default password. Enter a new password,

retype it to confirm and click Apply;

alternatively click Ignore to proceed to

the main menu if you do not want to

change the password now.

Internet Setup

If the INTERNET light is off, the Internet connection can be manually

configured.

Go to Network > WAN > Internet Connection. Enter the Internet

access information exactly as given to you by your ISP in the Internet

Connection screen and click Apply. See your User’s Guide for detailed

information.

When your ADSL Internet connection is setup, the DSL LED should be

green. The INTERNET LED lights green when either one of the Internet

connection is correct.

The Welcome screen opens. Click the

Wizard button in the top right corner to

enter the Wizard setup.

If the INTERNET light is off, select Go to

Wizard setup and click Apply to display

the wizard main screen.

Click INTERNET SETUP. Wait while your

AMG1202-T10A tries to detect your DSL

connection.

Follow the directions in the wizard. Enter

the settings as specified by your ISP. For

more details on using the wizard for

Internet configuration, see Internet and

Wireless Wizard Setup in the User’s

Guide.

URATIO

#If you cannot access the Internet and the INTERNET LED is off, make sure

you enter the correct information in the WAN screens.

If you are using a new Internet account, contact your ISP to make sure it is

active.

If you are trying to access the Internet wirelessly, make sure the wireless and

security settings in your wireless client are the same as the settings in the

AMG1202-T10A.

Wireless Setup

To create a wireless network, the AMG1202-T10A and your wireless

computer(s) must all use the same SSID (network name), channel and

security settings.

1. Go to Network > Wireless LAN.

2. Enable wireless LAN, enter a name to identify your wireless network

(such as “My-SSID“) in the SSID field, and select a channel which is

not used by neighboring wireless devices.

3. Select your security mode and configure wireless security settings. In

this example, the AMG1202-T10A uses WPA2-PSK for data

encryption.

If you do not set wireless security, anyone within range could use your AMG1202-

T10A to access your network and the Internet.

1010

Make sure your wireless security settings are compatible with your

existing wireless devices. See the User's Guide for more information on

wireless networks.

Go to the Set Up a WPS Connection section if you do not want to use

the wireless LAN screen to set up your wireless network.

Andere Handbücher für AMG1202-T10A

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications P-870H-53A v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660H-TX V2 - VERSION 3-40 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNT1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW Series Montageanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-51B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-792H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-B Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3925-B10B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG5500-A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG 2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VFG6005 Kurzanleitung

ZyXEL Communications

ZyXEL Communications PPC 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Handbuch

ZyXEL Communications

ZyXEL Communications VMG4927-B50A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 1050 - V2.00 EDITION 1 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt