ZyXEL Communications P-870HN-51B Bedienungsanleitung

www.zyxel.com

Quick Start Guide

P-870HN-5xb

IPv6 version

802.11n VDSL2 4-port

Gateway

Firmware Version 1.12

Edition 1, 2/2011

DEFAULT LOGIN DETAILS

LAN Port LAN1 ~ LAN4

IP Address http://192.168.1.1

Username admin

Password 1234

2011 ZyXEL Communications Corporation

Device Panels

Ethernet

LEDs 1-4

DSL LED

Internet

LED

Power LED

Antenna

Power Switch

Power Socket

Reset Button

DSL Port

WPS/WLAN Button

Ethernet

Ports 1-4

WLAN/

WPS LED

Introduction

The P-870HN-5xb is a VDSL2 gateway that provides super high-speed

Internet access. You can have multiple ADSL (ADSL, ADSL2, ADSL2+)

connections or multiple VDSL (VDSL, VDSL2) connections over a

telephone line. You cannot have ADSL and VDSL connections at the

same time. The P-870HN-5xb also provides IEEE 802.11b/g/n wireless

networking capability.

Overview

•Before You Begin, on page 4

•Hardware Connections, on page 5

•Initial Configuration, on page 7

•Set Up a WPS Connection, on page 10

LAN

WAN

ADSL / VDSL

INTERNET

P-870HN-5xb

Before You Begin

Make sure you have the following things before you start.

•INTERNET ACCESS: You need an Internet account with an ISP

(Internet Service Provider) and information such as user name,

password, and so on.

•WEB BROWSER: Internet Explorer 6.0 and later versions, with

JavaScript enabled, or Mozilla Firefox 3 and later versions or Safari

2.0 and later versions. The browser will be used to access the

Internet and/or access the P-870HN-5xb Web Configurator.

See the User’s Guide for all configuration details including file sharing and setting

up a shared printer.

To read the User's Guide insert the CD that came in the box into your

CD-ROM drive. A screen should pop up. Navigate to the User's Guide

from this screen. If a screen does not pop up, open Windows Explorer

(click My Computer), click on the CD-ROM drive (usually drive D) and

navigate to it from there.

NNECTION

Hardware Connections

Remove any clear plastic covers from the P-870HN-5xb before

using it.

1. Point the antenna up.

2. DSL: Use a telephone wire to connect this port to a telephone jack (or

the DSL or MODEM jack on a splitter, if one is already installed).

3. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this

port for initial configuration and/or Internet access.

4. Use the power adaptor provided with your P-870HN-5xb to connect

an appropriate power source to this socket.

5. Push the power switch to the on position.

Checking the LEDs

Look at the LEDs at the front panel of the P-870HN-5xb.

• The POWER LED blinks during start-up and is green once the P-

870HN-5xb is ready.

• Each ETHERNET LED turns on if the corresponding ETHERNET

port is properly connected. The LEDs blink when the P-870HN-5xb

is sending or receiving data through the corresponding ETHERNET

port.

• The DSL LED stays on if a physical DSL connection exists.

• The INTERNET LED is green when Internet access is available and

blinks when transmitting data.

• The WLAN/WPS LED stays green when the wireless LAN is ready.

It blinks when the P-870HN-5xb is sending/receiving data through

the wireless LAN.

#If none of the LEDs are on, check your connections. Make sure that you have

the power adaptor connected to the P-870HN-5xb and plugged into an

appropriate power source. Make sure the power source is turned on. Turn the

P-870HN-5xb off, wait for a few seconds and turn it back on. If the LEDs are

still off, contact your local vendor.

URATIO

Initial Configuration

1. Open your browser and

enter http://192.168.1.1 (the

P-870HN-5xb's default IP

address) as the address.

2. Enter the admin user name

admin and password 1234

(default). Click OK.

#If the login screen does not display, make sure you allow web browser pop-up

windows, JavaScripts and Java permissions. Your computer should also be

set to get an IP address automatically from a DHCP server. See the

appendices in your User's Guide for more information.

Internet Setup

Go to Network > WAN > Internet Connection. Enter the Internet

access information exactly as given to you by your ISP in the Internet

Connection screens. See your User’s Guide for detailed information.

When your ADSL Internet connection is setup, the DSL LED should be

green. When your VDSL Internet connection is setup, the DSL LED

should be orange. The INTERNET LED lights green when either one of

the Internet connection is correct.

#If you cannot access the Internet and the INTERNET LED is off, make sure

you enter the correct information in the WAN screens.

If you are using a new Internet account, contact your ISP to make sure it is

active.

If you are trying to access the Internet wirelessly, make sure the wireless and

security settings in your wireless client are the same as the settings in the P-

870HN-5xb.

Wireless Setup

To create a wireless network, the P-870HN-5xb and your wireless

computer(s) must all use the same SSID (network name), channel and

security settings.

1. Go to Network > Wireless LAN.

2. Enable wireless LAN, enter a name to identify your wireless network

(such as “My-SSID“) in the SSID field, and select a channel which is

not used by neighboring wireless devices.

3. Select your security mode and configure wireless security settings. In

this example, the P-870HN-5xb uses WPA2-PSK for data encryption.

If you do not set wireless security, anyone within range could use your P-870HN-

5xb to access your network and the Internet.

URATIO

Make sure your wireless security settings are compatible with your

existing wireless devices. See the User's Guide for more information on

wireless networks.

Go to the Set Up a WPS Connection section if you do not want to use

the wireless LAN screen to set up your wireless network.

1010

Set Up a WPS Connection

Check if your wireless device

supports WPS.

Place the device you want to

connect near the P-870HN-5xb.

Press the WPS button on the P-

870HN-5xb for more than 5

seconds.

The WPS light blinks.

Press the WPS button on a

compatible wireless device

(such as the NWD2205) within

2 minutes of pressing the WPS

button on the P-870HN-5xb.

Andere Handbücher für P-870HN-51B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications VMG1312-B Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P870HNU-51B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2881-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW Series Montageanleitung

ZyXEL Communications

ZyXEL Communications P-660HWP-D1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PRESTIGE 660RU Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-324 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Internet Security Gateway ZyWALL 100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2926-Q10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications G-4100 v2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNT1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302R-P1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 316 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Internet Security Gateway ZyWALL 100 Handbuch

ZyXEL Communications

ZyXEL Communications EMG2306-R10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P660RU-T1 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Montageanleitung

ZyXEL Communications

ZyXEL Communications P-2304R-P1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2926-Q10A Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt