ZyXEL Communications P-793H 601156 Bedienungsanleitung

www.zyxel.com

G.SHDSL.bis Bonded Broadband

Gateway

Version 3.70

Edition 1, 03/2010

P-793H v2

DEFAULT LOGIN DETAILS

IP Address: http://192.168.1.1

Admin Password: 1234

User Password: user

ZyXEL Communications Corporation

Device Panels

POWER

LED ETHERNET

LED 1-4 DSL

LED 1-2 INTERNET

LED

ON/OFF RESET

POWER ETHERNET

PORT1-4

DSL

PORT

CONSOLE

P-793H v2

Overview

The P-793H v2 is a secure G.SHDSL.bis bonded broadband gateway.

The P-793H v2 provides high-speed Internet access or high-speed point-

to-point connections with other ZyXEL devices of the same type. The P-

793H v2 itself can act as a router or as a bridge.

See your User’s Guide for background information on all features.

The included CD provides multi-media animations that help you set up

your P-793H v2.

Hardware Connections

1. DSL: Use the provided Y-connector with the included telephone

cables to connect the P-793H v2’s DSL port to the telephone jacks or

wall outlets for a point-to-2point connection.

For a standard connection to your ISP or a point-to-point connection,

you can unplug one of the telephone cables from the Y-connector and

use it for your DSL connection.

2. ETHERNET: Use an Ethernet cable to connect a computer to the

ETHERNET port for initial configuration and/or Internet access.

3. POWER: Use the power adaptor provided with your P-793H v2 to

connect an appropriate power source to the POWER socket. Make

sure the power source is on.

4. Push in the POWER button. Look at the lights on the front panel.

• The POWER light blinks while your P-793H v2 starts up and stays

on once it is ready. The DSL1 and DSL2 LEDs blink while the P-

793H v2 is trying to establish a connection with the ISP and stay on

when the connection is established. The INTERNET light is on

when you are able to access the Internet and blinks when the P-

793H v2 is sending or receiving data.

• The ETHERNET light stays on if the ETHERNET port is properly

connected and blinks when there is traffic.

If any of these lights are not on, check your connections, and inspect

your cables for damage. If the lights are still off, contact your local

vendor.

P-793H v2

Status Page

1. In your browser, go to http://192.168.1.1.

2. Enter the default password user to go directly to the Status screen.

3. See the User’s Guide for field descriptions of the Status screen.

Internet Setup

You must have an account for Internet access, and you should have the

information provided by your Internet Service Provider (ISP).

1. Open your web browser, and go to http://www.zyxel.com.

Your P-793H v2 tries to detect your Internet connection. Wait for the P-

793H v2 to finish detection. If any other screens appear, follow the

directions in the screen.

If the web page opens correctly, your P-793H v2 is ready for you to use.

If the web page does not open, follow the rest of the steps. You should

have the information provided by your ISP.

2. In your browser, go to http://192.168.1.1.

3. Enter the admin password 1234 to set up your internet and wireless

connections and security settings. Click Login.

P-793H v2

4. When you login the for first time, it is recommended that you change

the default password. Follow the directions in this screen to do so.

5. Click Go to Wizard setup. Then, click Apply.

6. Click INTERNET SETUP. Wait while your P-793H v2 tries to detect

your DSL connection.

7. Follow the directions in the wizard. Do not change default settings if

your ISP did not provide information.

Troubleshooting

1. If you cannot access the web configurator using Internet Explorer in

Windows XP or Windows Server 2003, make sure you allow pop-up

windows, JavaScripts and Java permissions or set the Internet

security level lower than High in Internet Explorer (in Internet

Explorer, click Tools > Internet Options > Security > Custom

Level...). See the appendix in the User’s Guide for more information.

2. If you cannot access the Internet when your computer is connected to

the ETHERNET port, follow these steps.

P-793H v2

a. Check the lights on the front panel. If they are different from what is

described in Hardware Connections , make sure the P-793H v2 is

correctly connected. If the lights are still different, turn off the

device, wait a few seconds, and turn it on again.

b. Follow the steps in Internet Setup again. Make sure you enter the

correct information. For example, if your account has a user name

and password, make sure you type it correctly. In addition, if you

are not sure which encapsulation your ISP uses, contact your ISP.

c. If you are using a new Internet account, contact your ISP to make

sure it is active.

d. If you still have problems, see Troubleshooting in the User’s

Guide.

Viewing Certification(s)

• Go to www.zyxel.com.

• Select your product from the drop-downlist box on the ZyXEL home

page to go to that product's page.

• Select the certification you wish to view from this page.

Andere Handbücher für P-793H 601156

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications ZYWALL USG CLI Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302HW-P1 Series Referenzhandbuch

ZyXEL Communications

ZyXEL Communications NVG2053 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2304R-P1 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE7410 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VSG-1200 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL USG 200 UNIFIED Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications UAG50 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications NBG-510S Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660N-T1A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2302HWDL-P1 Handbuch

ZyXEL Communications

ZyXEL Communications PX7511-B0 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VSG1435 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 5 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 792H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG3312-T20A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWall1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 653HWI series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-792H Referenzhandbuch

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 35 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications MAX308M Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt