ZyXEL Communications PRESTIGE 660 HW Series Bedienungsanleitung

Prestige 660H Series

ADSL 2+ 4-Port Gateway

Prestige 660HW Series

ADSL 2+ 4-Port Gateway with 802.11g Wireless

Quick Start Guide

Version 3.40

5/2005

Prestige 660H/HW Series Quick Start Guide

Overview

The Prestige 660H (P660H) and Prestige 660HW (P660HW) are ADSL routers with a built-in switch. The

Prestige 660HW also has IEEE 802.11g wireless capability. All wireless features pertain to the P660HW series

only.

You may need your Internet access information.

See your User’s Guide for background information on all features.

This guide is divided into the following sections.

1 Hardware Connections

You need the following before you start.

If you prefer to see a multi-media animation of how to make hardware connections, see the included CD.

1Hardware Connections

2Configuration for Internet Access

3Wireless Configuration (P660HW)

4NAT

5Firewall

6Troubleshooting

Prestige Computer(s) Ethernet Cable Telephone Cable Power Adaptor

Prestige 660H/HW Series Quick Start Guide

1DSL: Connect the Prestige to a telephone jack using a telephone wire.

2LAN: Use an Ethernet cable to connect a computer to a LAN 10/100M port for initial configuration and/or

Internet access.

3POWER: Use the included power adaptor to connect the POWER socket to an appropriate power source

(see the User’s Guide for power adaptors specifications by region).

After you’ve made the connections, push in the power button to turn on the Prestige. Look at the front panel

LEDs. The PWR/SYS LED blinks while performing system testing. The PWR/SYS and/or WLAN LEDs then

turn steady on if the testing is successful. The LAN LEDs turn on if the (corresponding) LAN ports are properly

connected.

2 Configuration for Internet Access

You may configure the Prestige for Internet access in any one of these ways:

• Configuration Genie

• Zero Configuration

•Web Configurator Internet Access Wizard

Prestige 660H/HW Series Quick Start Guide

2.1 Configuration Genie

From the included CD, click “Multimedia Auto Provisioner” (the installation and configuration assistant) and

then click “Installation Tutorial”. After you’ve viewed the tutorial, click “Configuration Genie” at the end of the

installation tutorial or from “Multimedia Auto Provisioner” in the CD.

2.2 Zero Configuration

Launch your web browser and

navigate to any web site (for

example, www.zyxel.com). The

Prestige automatically detects

and configures your Internet

connection. This may take about

two minutes.

If you have a PPPoE or PPPoA

connection, a screen displays

prompting you to enter your

Internet account information. Enter the username, password and/or service name exactly as provided. Click

Apply.

Note: Configuration Genie or Zero Configuration are only able to configure the device automatically for

Internet access if you are using PPPoE, PPPoA or ENET ENCAP encapsulation with a

dynamically-assigned IP address from your ISP.

If you’re not using these Internet access settings, then use the Web Configurator Internet

Access Wizard to manually configure the device.

2.3 Accessing the Web Configurator

1Launch your web browser. Enter

“192.168.1.1” as the web site address.

Prestige 660H/HW Series Quick Start Guide

Note: If you do not see the next screen, then please read Section 6.1 on page 11

4In the MAIN MENU screen, click WIZARD SETUP.

2.3.1 Internet Access Setup

Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen and

then click Next to continue or click Back to return to the previous screen.

Screen information is not saved when you click Back.

2Click Login. 3Type a new

password

(retype it to

confirm) and

click Apply.

Otherwise click

Ignore. You

then see the

main web

configurator

screen

Prestige 660H/HW Series Quick Start Guide

1From the Mode drop-down list box, select Routing (default) if you want to use routing features such as

NAT.

2The next wizard screen varies depending on the Encapsulation you chose in the first wizard screen. From

the Network Address Translation drop-down list box, select SUA Only if you have one public IP address,

Full Feature if you have more than one public IP address (for translation) or None to disable NAT.

•PPPoE.

Select Connect

on Demand

when you don't

want the

connection up

all the time and

specify an idle

time-out period

(in seconds) in

the Max. Idle

Timeout field.

Select Nailed-

Up Connection when you want your connection up all

the time. The Prestige will try to bring up the

connection automatically if it is disconnected.

•ENET

ENCAP

Prestige 660H/HW Series Quick Start Guide

Note: You will only see the next two screens in Routing mode.

3 Wireless Configuration (P660HW series only)

WPA-PSK encryption is preferred to WEP because it has user authentication and improved data encryption. If

you don’t have WPA-capable wireless clients, configure WEP encryption.

• PPPoA • RFC1483

3Verify your

LAN and

WAN

settings.

To change the

LAN settings,

click Change

LAN

Configuration;

otherwise click

Save Settings to

save the

configuration

and go to the

final wizard

screen.If you

change the

Prestige’s LAN IP address, you must use the new IP

address if you want to access the web configurator

again.

4Click Save Settings in the screen shown in step

3 to go to the final wizard screen.The Prestige

automatically tests the connection to the

computer(s) connected to the LAN ports. To test

the connection from the Prestige to the ISP, click

Start Diagnose. Otherwise click Return to Main

Menu to go back to the main screen.

Prestige 660H/HW Series Quick Start Guide

Note: Wireless clients and the Prestige must use the same SSID, channel ID, WEP or WPA-PSK key (if

enabled).

1Click the Wireless LAN link under

Advanced Setup.

2Click 802.1x/WPA.

Select

Authentic

ation

Required,

then

select

WPA-

PSK and

then type

a Pre-

shared

Key.

3Click Advanced Setup, Wireless LAN, Wireless. In the ESSID field, enter up to 32 printable characters to

uniquely identify the Prestige. If you didn’t configure WPA-PSK, configure WEP in this screen (not visible

if you’ve configured WPA-PSK).

Prestige 660H/HW Series Quick Start Guide

3.1 OTIST

Configure this screen only if you have OTIST-aware wireless clients. OTIST (One-Touch Intelligent Security

Technology) allows you to transfer your Prestige’s SSID and WEP or WPA-PSK security settings to wireless

clients that support OTIST and are within transmission range. You can also choose to have OTIST generate

a WPA-PSK key for you if you didn’t configure one manually.

Click Advanced Setup, Wireless LAN and then click OTIST. To change the Setup key enter up to eight

printable characters. To have OTIST automatically generate a WPA-PSK key select the Yes check box. If you

manually configured a WEP key or a WPA-PSK key and you also selected this check box, then the key you

manually configured is used.

Note: The AP and wireless client(s) MUST use

the same Setup key.

In each wireless client ZyXEL utility, click the Adapter tab. Select the OTIST check box, enter the same

Setup Key as your Prestige’s and click Save.

Note: You must click Start in the Prestige OTIST web configurator screen and in the wireless client(s)

Adapter screen all within three minutes (at the time or writing). You can start OTIST in the

wireless clients and Prestige in any order but they must all be within range and with OTIST

enabled.

Prestige 660H/HW Series Quick Start Guide

4 NAT

NAT (Network Address Translation - NAT, RFC 1631) means the translation of an IP address in one network to

a different IP address in another. For example, you could translate one public IP address to multiple private IP

addresses on your LAN (SUA Only).

5 Firewall

The firewall is already enabled by default on the Prestige.

Click

Advanced

Setup and

then NAT to

open the

NAT-Mode

screen.

Select SUA

Only if you

have one public IP address and Full Feature if

you have multiple public IP addresses (for

address translation).

Select Enable SIP ALG to allow VoIP calls to

pass through NAT.

If you have

servers on your

LAN, configure

an SUA server

set to have them

visible to the

outside. From

the NAT - Mode

screen click Edit

Details and fill in

the fields as

shown.

Click Advanced Setup and

then Firewall to open the

firewall screen. The firewall

protects your LAN from

attacks from the Internet. No

traffic can enter your LAN

unless a request was

generated on the LAN first.

Click Default

Policy to see

rule direction

information.

You can also

disable the

firewall here if

you want.

Andere Handbücher für PRESTIGE 660 HW Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications UAG4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-TX Handbuch

ZyXEL Communications

ZyXEL Communications P-873HNU-51B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-Fx series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 660H Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 314 PLUS Handbuch

ZyXEL Communications

ZyXEL Communications VMG1312-T20B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HW-51A V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG8726-B10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications N VDSL2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-662H-61 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications EMG2926-Q10A Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PK5001Z Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 70 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications SBG3500-N Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications LTE3301 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-Tx v3 Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL 20W - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-794H Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ADSL 2+ Security Gateway Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt