ZyXEL Communications PK5001Z Bedienungsanleitung

PK5001Z

802.11n

ireless ADSL2+ 4-port

Gateway

Quick Start

Version 3

2012

Edition 2

PK5001Z Quick Start Guide

Overview

The PK5001Z is a wireless ADSL router with a four-port buil

-in switch.

his Quick Start Guide shows you how to use the PK5001Z to connect to

the Internet and how to configure the device settings to connect

wirelesslyy.

See your User’s Guide for background information on all features.

Quick Login Information

LAN IP address

http://192.168.0.1

default administrator password

Check back label

for the info

Note: The device is designed to allow both vertical and wall

mounted usage.

PK5001Z Quick Start Guide

Hardware

Connections

1 DSL: Use the gray telephone wire to connect your PK5001Z’s DSL port

to a telephone jack (or to the modem port on a splitter if you are using

one).

2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an

ETHERNET port for initial con

iguration and/or Internet access.

3 POWER: Use the included power adaptor to connect an appropriate

power source to the POWER socket. Make sure the power source is on.

4 Push in the POWER button.

5 Look at the lights on the front panel.

• The POWER light blinks while your PK5001Z starts up and stays on

once it is ready.

• Each ETHERNET light stays on if the corresponding ETHERNET port is

properly connected and blinks when there is traffic.

• The DSL light is on when the PK5001Z has a DSL connection.

• The INTERNET light is on when you are able to access the Internet and

blinks when the PK5001Z

Is sending or receiving data.

ait a couple of minutes while your device

checks the connection.

If any of these lights are not on, check your connections and inspect

your cables for damage. If the lights are still off, contact your local

PK5001Z Quick Start Guide

vendor.

Internet Connection

Setup: Automatic

Use this section to have your PK5001Z au

oma

ically detect and set up

your Internet connec

ion.

1 Open your web browser to a website.

ait while your PK5001Z tries to

detect your DSL connection to your ISP. This may take a few minutes.

2 After it detects the connection, the DSL light shows green on your

device and the Internet light comes on when the Internet is ready for you

to use. If you have a PPPoE connec

ion, you will have to enter your user

name and password.

3 Go to section 3 if you wish to configure your wireless se

ings.

4 If you do not see the connection test screen, or the connection

test is not success

ul , follow the instructions i n the screen below, or

check your connections and restart the PK5001Z. If you still cannot

access the Internet, follow the steps in section 3.

Configuring your

Wireless

Settings

To create a wireless network, the PK5001Z and your wireless computer

must all use the same SSID (network name), channel and security

PK5001Z Quick Start Guide

settings.

If you do not set wireless security then anyone within range could use

your PK5001Z to access your network and the Internet.

Choose

PA-PSK wireless security if your wireless device supports it

as it is stronger than

EP. Otherwise choose

EP.

1 Select Active and click Next to continue. It is s

rongly recommended

that Enable OTIST is NOT selected.

See section 7 for more information.

2 Configure your wireless settings in the screen. Click Next.

3If you select either WEP or WPA-PSK security (recommended), then

follow the directions to enter the appropriate key. Click Next to continue

and Apply to save your wireless LAN settings.

4 Check your configuration and write down your wireless LAN settings for

later use. Click Finish to complete and save the wizard setup.

5 Your Internet is ready for you to use. Open your browser and navigate

to your favorite website.

Internet Connection

Setup Using

Advanced

Settings

Use

his section to set up your Internet connection manually if you do not

PK5001Z Quick Start Guide

see the ISP

arameters for Internet

Access screen when you run the wizard (see section 4, step 4).

1 Login again. (Follow steps 1 to 5 in section 3.)

2 Select Go to Advanced setup. Then, click Apply.

3 The Status screen appears. Click Network > WAN in the navigation

panel on the left of the screen.

4 Enter the in

ormation exactly as provided by your ISP. Click Apply.

5 If you still cannot access the Internet, see Troubleshooting and/or

contact your Internet Service Provider

(ISP) for assistance.

Troubleshooting

1 If you cannot access the web configurator,

• Your computer may be set to use a static IP address in a different subnet

from the ZyXEL device. See the appendix in the User’s Guide for

information on setting up your IP address.

• If you are using Internet Explorer in

indows XP or

indows Server

2003, make sure you allow pop-up windows, JavaScripts and Java

permissions or set the Internet security level lower than High in Internet

Explorer (i n Internet Explorer, click Tools > Internet Options > Security >

Custom Level...). See the appendix in the User’s Guide for more

information.

PK5001Z Quick Start Guide

2 If you cannot access the Internet when your computer is connected to

the ETHERNET port, follow these steps.

A) Check the lights on the front panel. If they are different from what is

described in section 1, make sure the PK5001Z is correc

ly connected.

(See section 1.) If the lights are still different, turn off the device, wait a

few seconds, and turn it on again.

B) Check you have correctly entered the information your ISP gave you.

For example, if your account has a user name and password, make sure

you type it correctly. In addition, if you are not sure which encapsula

ion

your ISP uses, contact your ISP. If your ISP did not give you Internet

connec

ion

ormation, follow the steps in section 2.

C) If you are using a new Internet account, contact your ISP to make

sure it is active.

D) If you still have problems, see Troubleshooting in the User’s Guide.

If you cannot access the Internet after you take the steps above, either try

the following or contact your ISP:

E) Turn your PK5001Z off and on. Open your Internet browser if it is not

already open.

Let the PK5001Z complete the DSL connection test (this may take several

minutes). See section 2 for details.

If the test is successful, check whether you can access the Internet.

If you still cannot access the Internet, contact your Internet Service

PK5001Z Quick Start Guide

Provider.

3 If you cannot access the Internet using the wireless network, follow

these steps.

A) On a computer in the wireless network, open your browser, and go to

http://192.168.0.1. If you see the login screen in section 3,

ollow

suggestions A - F above. If you do not, go to the next step.

B) On a computer connected to the PK5001Z, make sure your PK5001Z

and the computers on your wireless network are using the same

wireless and wireless security settings. See the chapter on

ireless LAN

in the User’s Guide for more in

ormaction.

Viewing Your

Product’s

Certifications

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home

page to go to that product's page.

3 Select the certification you wish to view from this page.

Customer Information

Statement

The information informing the user of his/her and the telephone

company's rights and obligations is outlined on the following pages. This

PK5001Z Quick Start Guide

ormation will be included in the

inal version of the manual.

Customer Information

1 This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. On bottom of this equipment is a

label that con

ains, among other in

ormation, a product identifier of

EST PK5001Z. If requested, this number must be provided to the

elephone company.

2 If this equipment DL causes harm to the

elephone network, the

telephone company will notify you in advance that temporary

discontinuance of service may be required. But if advance notice iisn’t

practical, the telephone company will notify the cus

omer as soon as

possible.

lso you will be advised of your right to

ile a complaint with

the FCC if you believe it is necessary.

3 The telephone company may make changes in its facilities, equipment,

operations or procedures that

could affect the operation of the equipment. If this happens, the

elephone company will provide advance notice in order for you to make

necessary modification to maintain uninterrupted service.

4 If you experience

rouble with

his equipment, you disconnect it from the

network until the problem has been corrected or until you are sure that

the equipment is not malfunctioning.

5 Please follow instructions for repairing if any (e.g. battery replacement

PK5001Z Quick Start Guide

section); otherwise do not alternate or repair any parts of device except

speci

ied.

6 Connection to party line service is subject to state

ariffs. Contact the

state public utility commission, public service commission or corporation

commission for in

ormation.

7 If the telephone company requests information on what equipment is

connected to their lines, inform them of:

a The ringer equivalence number is 02

b) The USOC jack required RJ14, and

c) The FCC Registration Number US: 1RODL02BPK5001Z

Item (a) and (c) are indicated on the label. The ringer equivalence number

(REN) is used to determine how many devices can be connected to your

telephone line. In most areas, the sum of the RENs of all devices on

Any one line should no

exceed

ive(5

.If t

oo many devices are

ached

, t

hey may no

ring properly

8 If your home has specially wired alarm equipment connected to the

telephone line, ensure the ins

alla

ion of this equipment does not disable

alarm equipment; consult your telephone company or a quali

ied ins

aller.

Certifications

Federal Communications Commission (FCC) Interference Statement

Inhaltsverzeichnis

Andere ZyXEL Communications Tor Handbücher

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL P1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HN-51 - Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications USG310 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL 10/10 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1312-T10D Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications AMG1001-T Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYAIR B-2000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HNT1 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Handbuch

ZyXEL Communications

ZyXEL Communications UAG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications PMG5617GA Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-870HN-51B Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZyWALL USG Series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications p-2302r series Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige P660RU-T1 Referenzhandbuch

ZyXEL Communications

ZyXEL Communications N4100 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL P1 - V3.64 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL USG 20W Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications Prestige 662HW Series Montageanleitung

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-660HW-T - V2 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications P-2304R-P1 Series Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung

RTA

RTA 460MCBC-N2E Technisches Datenblatt